Flapping and flexible wings for biological and micro air vehicles
Abstract
Micro air vehicles (MAVs) with wing spans of 15 cm or less, and flight speed of 30–60 kph are of interest for military and civilian applications. There are two prominent features of MAV flight: (i) low Reynolds number (104–105), resulting in unfavorable aerodynamic conditions to support controlled flight, and (ii) small physical dimensions, resulting in certain favorable scaling characteristics including structural strength, reduced stall speed, and low inertia. Based on observations of biological flight vehicles, it appears that wing motion and flexible airfoils are two key attributes for flight at low Reynolds number. The small size of MAVs corresponds in nature to small birds, which do not glide like large birds, but instead flap with considerable change of wing shape during a single flapping cycle. With flapping and flexible wings, birds overcome the deteriorating aerodynamic performance under steady flow conditions by employing unsteady mechanisms. In this article, we review both biological and aeronautical literatures to present salient features relevant to MAVs. We first summarize scaling laws of biological and micro air vehicles involving wing span, wing loading, vehicle mass, cruising speed, flapping frequency, and power. Next we discuss kinematics of flapping wings and aerodynamic models for analyzing lift, drag and power. Then we present issues related to low Reynolds number flows and airfoil shape selection. Recent work on flexible structures capable of adjusting the airfoil shape in response to freestream variations is also discussed.
References (0)
Cited by (652)
Energy harvesting in a flow-induced vibrating flapper with biomimetic gaits
2024, International Journal of Mechanical SciencesEnergy harvesting from flow induced vibrations (FIV) in flexible bodies offer opportunities for power generation in biomimicking robotic devices and is an active area of research. The focus of this study is on investigating the underlying physics and qualitatively analysing the energy extraction scenarios in similar structural systems, comprising of a flexible piezoelectric flapper in a low Reynolds number flow regime. A high-fidelity three-way fully coupled fluid–structure–electric energy solver is developed in-house to study the energy harvesting capabilities of such a flapper, its hydrodynamic characteristics and the associated unsteady flow-field. The results indicate that the flapper deformation profiles at the most efficient harvesting regimes, resemble the propulsion gaits of natural swimmers. Investigations on the effects of a sinusoidal heaving actuation reveal no significant impact on the harvested power at the high yield (high power output) regime, identified under the passive condition showing biomimetic gait. This study provides mechanics based insights that is expected to be useful for bio-inspired designs of FIV based harvesters.
An interface preserving and residual-based adaptivity for phase-field modeling of fully Eulerian fluid-structure interaction
2023, Journal of Computational PhysicsIn this paper, we present a novel interface preserving and residual-based adaptivity procedure for the phase-field modeling of a fully Eulerian fluid-structure interaction. The proposed adaptive fully Eulerian procedure involves a fixed background unstructured finite element mesh on which the fluid-structure boundary is treated implicitly via a diffused interface description. We employ the stabilized finite element formulation and a partitioned iterative procedure to solve the coupled system of the Allen-Cahn phase-field equation with the unified momentum equation comprising solid and fluid dynamics. To evaluate the solid stresses, the left Cauchy-Green deformation tensor is convected at each time step to trace the evolution of the solid strain in the Eulerian reference frame. We utilize a residual based error indicator and the newest vertex bisection algorithm for the adaptive refinement/coarsening of the unstructured mesh. Through the adaptive finite element method, we aim to preserve the profile of the diffused interface in the presence of convective distortion. We propose an early stopping criterion for the adaptivity of the interface dynamics by combining the effects of the phase-field interface thickness parameter and the mesh resolution. In addition, we control the size of the refined/coarsened elements by introducing a characteristic length scale governed by a weighted harmonic mean of the desired bulk and the interface mesh resolutions. The proposed stopping criterion and the characteristic length scale provide significant reductions in the computational cost while simultaneously ensuring convergence properties of the coupled fluid-structure system. We perform a detailed convergence and accuracy analysis via two benchmark problems namely, the pure solid system and a coupled fluid-solid system with an interface in a rectangular domain. We further provide a comparative study between feature- and residual based adaptive strategies. We systematically assess the performance of the adaptive procedure in terms of conservation properties and computational efficiency. Finally, we demonstrate our fully Eulerian adaptive solver to simulate the contact and bouncing phenomenon between an elastic solid and a rigid wall.
Energy harvesting fueling the revival of self-powered unmanned aerial vehicles
2023, Energy Conversion and ManagementUnmanned aerial vehicles (UAVs) have been widely used in various situations, such as life rescue, environmental exploration, and wireless communication, to avoid the safety risk of human operations. Particularly, battery-powered UAVs have gained considerable interest due to their portability, low cost, and manufacturing convenience. However, their potential use greatly relies on limited battery life, and energy harvesting as a sustainable energy strategy is opening a promising way to realize self-powered UAVs. Here, we focus on discussing the existing UAV energy harvesting methods from the perspective of solar and mechanical energy. Based on these energy sources, we also discuss the commonly used energy conversion mechanisms and some representative architectures of the latest UAV energy harvesters. Solar energy harvesting for UAVs mainly relies on photovoltaic cells and can reach watt-scale output power. In contrast, mechanical energy harvesting for UAVs can be further refined to wind-induced vibration and flapping wing motion whose output power is in the milliwatt scale. Dynamic soaring, inspired by the maneuver of albatrosses, is also reviewed as one mechanical energy harvesting method. Furthermore, challenges and future research directions are discussed and proposed.
An interface and geometry preserving phase-field method for fully Eulerian fluid-structure interaction
2023, Journal of Computational PhysicsWe present an interface and geometry preserving (IGP) method for modeling fully Eulerian fluid-structure interaction via phase-field formulation. While the time-dependent mobility model preserves the hyperbolic tangent interface profile, the proposed method maintains the geometry of the solid-fluid interface by minimizing the volume-conserved mean curvature flow. To reduce the curvature flow, we construct a gradient-minimizing velocity field (GMV) for the convection of the order parameter. The constructed velocity field retains the solid velocity in the solid domain while extending the velocity in the normal direction throughout the diffuse interface region. With this treatment, the GMV reduces the normal velocity difference of the isosurfaces of the order parameter, alleviating the undesired thickening or thinning of the diffuse interface region due to the convection. As a result, the time-dependent mobility coefficient is substantially reduced and there is a lesser volume-conserved mean curvature flow. Furthermore, the GMV ensures that the diffuse interface region moves with the solid bulk despite the fluid flow, such that the fluid-solid interface conforms to the geometry of the solid. Using the unified momentum and mass conservation equations via the phase-dependent interpolation, we integrate the IGP method into a fully Eulerian fluid-structure interaction solver based on the incompressible viscous fluid and the neo-Hookean solid models. The kinematics of the solid in an Eulerian frame of reference is resolved by evolving the left Cauchy-Green tensor. We first demonstrate the ability of the phase-field-based IGP method for the convection of circular and square interfaces in a prescribed velocity field. The variational fluid-structure interaction framework with the IGP method is then examined on the deformation of a solid block under cavity flow. We next explore the geometry-preserving effect of the proposed framework when the fluid flow passes over a fixed deformable block in a channel. Finally, the vibration of a flexible plate attached behind a stationary cylinder is considered to demonstrate the ability of the framework in solving unsteady fluid-structure interaction problems.
Heaving foil propulsion performance under combined base and perturbation signal inputs
2022, Ocean EngineeringThe thrust variation, efficiency, and wake evolution of a flapping foil were investigated for a variety of base and perturbation frequencies. The study was inspired by the complex environment in which fish swim. In this numerical study, the waveform of the perturbation signal was adjusted by the waveform parameter k. The results demonstrate that the addition of perturbations increases thrust in the majority of cases, with square wave perturbations having the most substantial effect. However, the addition of a perturbation signal reduces the propulsion efficiency; a square wave perturbation significantly reduces the propulsion efficiency, while a sinusoidal or approximate sawtooth wave perturbation slightly decrease the propulsion efficiency. The change in the wake structure is closely related to the perturbation signal waveform, base frequency magnitude, and perturbation frequency magnitude, according to the wake structure analysis. The present work provides useful findings for optimizing underwater vehicle motion parameters.
Membrane flutter in three-dimensional inviscid flow
2022, Journal of Fluid Mechanics