Research articles
Pure phase BiFeO3 thin films sputtered over Si: A new route towards high magnetization

https://doi.org/10.1016/j.jmmm.2018.03.056Get rights and content
Under an Elsevier user license
open access

Highlights

  • O2 free route for pure single phase BiFeO3 thin film growth over Si.

  • Mean particle size of 33 nm (XRD, SEM); Fe3+ and Fe2+ (XPS) indicating oxygen vacancies.

  • Ferromagnetic behavior at 300 K with high saturation magnetization.

Abstract

We have investigated the structural and magnetic properties of BiFeO3 (BFO) thin films grown over (1 0 0)-oriented Si substrates by rf magnetron sputtering in a new route under O2 free low pressure Ar atmosphere. Single-phase BFO films were deposited in a heated substrate and post-annealed in situ. The new routed allows high deposition rate and produce polycrystalline BFO pure phase, confirmed by high resolution X-ray diffraction. Scanning electron and atomic force microscopy reveal very low surface roughness and mean particle size of 33 nm. The BFO phase and composition were confirmed by transmission electron microscopy and line scanning energy-dispersive X-ray spectroscopy in transmission electron microscopy mode. The surface chemistry of the thin film, analyzed by X-ray photoelectron spectroscopy, reveals the presence of Fe3+ and Fe2+ in a 2:1 ratio, a strong indication that the film contains oxygen vacancies. An hysteretic ferromagnetic behavior with room temperature high saturation magnetization ∼165 × 103 A/m was measured along the film perpendicular and parallel directions. Such high magnetization, deriving from this new route, is explained in the scope of oxygen vacancies, the break of the antiferromagnetic cycloidal order and the increase of spin canting by change in the surface/volume ratio. Understanding the magnetic behavior of a multiferroic thin films is a key for the development of heterogeneous layered structures and multilayered devices and the production of multiferroic materials over Si substrates opens new possibilities in the development of materials that can be directly integrated into the existent semiconductor and spintronic technologies.

Keywords

Thin films
Bismuth ferrite
Multiferroic

Cited by (0)