Elsevier

Mechatronics

Volume 19, Issue 7, October 2009, Pages 1041-1042
Mechatronics

Editorial
Introduction to the special issue on hardware-in-the-loop simulation

https://doi.org/10.1016/j.mechatronics.2009.09.005Get rights and content

References (0)

Cited by (16)

  • Compensation of mass-based effects in component scaling on a hardware-in-the-loop test bench by virtual inertia

    2021, Mechatronics
    Citation Excerpt :

    Hardware-in-the-Loop (HiL) test benches are used in product development for validation tests as well as for generating target values in design activities [1].

  • Scaling of Rotational Quantities for Simultaneous Testing of Powertrain Subsystems with Different Scaling on a X-in-the-Loop Test Bench

    2020, Mechatronics
    Citation Excerpt :

    Hardware-in-the-Loop (HiL) test benches are used for testing of control units during the development phase as well as for generating target values for design [1].

  • Hardware-In-the-Loop test rig for the ISWEC wave energy system

    2015, Mechatronics
    Citation Excerpt :

    Indeed, Hardware-In-the-Loop techniques are nowadays more and more used to reduce time and cost of development and prototyping of engineering systems. HIL simulation is a real-time simulation technique consisting of coupling parts of a real system to a numerical model that simulates the remaining part of the whole system [5]. In this way, for instance, if a part of the system is difficult to model it can be replaced with the real part itself.

  • Cell-BMS validation with a hardware-in-the-loop simulation of lithium-ion battery cells for electric vehicles

    2013, International Journal of Electrical Power and Energy Systems
    Citation Excerpt :

    To enhance the efficiency and reliability of the battery system, the development of hardware and software of the BMS could be done according to the V-mode methodology, which has become an industrial standard for automotive development. This study focuses on the HIL validation of the cell-BMS, which is one of the steps of the V-mode process [16–19]. According to the analysis of the BMS, the HIL system will implement the test of the functions mainly including cell voltage monitoring, cell balancing and diagnosis, so the HIL system covers the following functions:

  • Development and model-based transparency analysis of an Internet-distributed hardware-in-the-loop simulation platform

    2011, Mechatronics
    Citation Excerpt :

    Hardware-in-the-loop simulation (HILS) provides a bridge between physical prototyping and virtual experiments by uniquely combining their advantages and allowing for cost-effective, high-fidelity experiments [1,2].

  • Semi-physical simulation ground verification system for space non-cooperative targets

    2022, Hongwai yu Jiguang Gongcheng/Infrared and Laser Engineering
View all citing articles on Scopus
View full text