Hostname: page-component-76fb5796d-vvkck Total loading time: 0 Render date: 2024-04-25T08:24:24.891Z Has data issue: false hasContentIssue false
  • English
  • Français

Measurements of the structure of the Reynolds stress in a turbulent boundary layer

Published online by Cambridge University Press:  29 March 2006

S. S. Lu  and
W. W. Willmarth
S. S. Lu
Affiliation:
Department of Aerospace Engineering, The University of Michigan
W. W. Willmarth
Affiliation:
Department of Aerospace Engineering, The University of Michigan
Get access Rights & Permissions [Opens in a new window]

Abstract

Additional experimental studies of the structure of Reynolds stress which supplement our previous work (Willmarth & Lu 1971) are reported. The velocity at the edge of the viscous sublayer is again used as a detector signal for bursts and sweeps. The signal uv obtained from an X-wire probe at various locations is conditionally sampled and sorted into four quadrants of the u, v plane. Using this method it is found that, when the velocity uw at the edge of the viscous sublayer becomes low and decreasing, a burst occurs. On the other hand, a sweep occurs when uw becomes large and increasing. The convection speeds of the bursts and the sweeps are found to be equal and are about 0·8 times the local mean velocity and 0·425 times the free-stream velocity at a distance y ≈ 0·15δ* from the wall (δ* is the displacement thickness). Throughout the turbulent boundary layer, the bursts are the largest contributors to $\overline{uv}$ with the sweeps the second largest. On average, the bursts account for 77% of $\overline{uv} $, while the sweeps provide 55%; the excess percentage over 100% is due to the other small negative contributions.

Characteristic mean time intervals are obtained for both bursts and sweeps from certain unique features of the measurements of fractional contributions to $\overline{uv}$ from different events. Both mean time intervals are approximately equal and constant for most of the turbulent boundary layer. The scaling of the mean time interval between bursts with outer flow variables is confirmed. It is suggested that many of the features of the fluctuating flow revealed by the measurements may be explained by convection past the measuring station of an evolving deterministic flow pattern such as the hairpin vorticity model of Willmarth & Tu (1967).

Type
Research Article
Information
Journal of Fluid Mechanics , Volume 60 , Issue 3 , 18 September 1973 , pp. 481 - 511
Copyright
© 1973 Cambridge University Press

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

Blackwelder, R. F. & Kaplan, R. E. 1971 Intermittent structure in turbulent boundary layers. NATO—AGARD Conf. Proc. on Turbulent Shear Flow, no. 93, p. 5.Google Scholar
Coantic, M. 1965 Comptes Rendus, 260, 2981.
Corino, E. R. & Brodkey, R. S. 1969 J. Fluid Mech. 37, 1.
Eckelmann, H. 1970 Mitteilungen MPI fur Stromungsforschung und der AVA, Göttingen, no. 48.
Grass, A. J. 1971 J. Fluid Mech. 50, 2, 233.
Gupta, A. K. & Kaplan, R. E. 1972 Phys. Fluids, 15, 981.
Kibens, V. 1968 The intermittent region of a turbulent boundary layer. Ph.D. dissertation, The Johns Hopkins University.
Kim, H. T., Kline, S. J. & Reynolds, W. C. 1968 An experimental study of turbulence production near a smooth wall in a turbulent boundary layer with zero pressure gradient. Thermosciences Division, Mech. Engng Dept., Stanford University Rep. MD-20.Google Scholar
Kim, H. T., Kline, S. J. & Reynolds, W. C. 1971 J. Fluid Mech. 50, 133.
Klebanoff, P. S. 1954 Characteristics of turbulence in a boundary layer with zero pressure gradient. N.A.C.A. Tech. Note, no. 3178.Google Scholar
Kline, S. J., Reynolds, W. C., Schraub, F. A. & Runstadler, P. W. 1967 J. Fluid Mech. 30, 741.
Kovasznay, L. S. G., Kibens, V. & Blackwelder, R. F. 1970 J. Fluid Mech. 41, 283.
Laufer, J. 1953 The structure of turbulence in a fully developed pipe flow. N.A.C.A. Tech. Note, no. 2954.Google Scholar
Laufer, J. & Badri Narayanan, M. A. 1971 Phys. Fluids, 14, 182.
Lu, S. S. & Willmarth, W. W. 1972 The structure of the Reynolds stress in a turbulent boundary layer, Dept. Aerospace Engng, University of Michigan, ORA Rep. 021490–2-T.Google Scholar
Lu, S. S. & Willmarth, W. W. 1973 Phys. Fluids. 16, to appear.
Rao, K. N., Narasimha, R. & Badri Narayanan, M. A. 1969 Hot-wire measurements of burst parameter in a turbulent boundary layer. Dept. of Aeron. Engng, Indian Institute of Science, Bangalore. Rep. no. 69 FM 8.Google Scholar
Rao, K. N., Narasimha, R. & Badri Narayanan, M. A. 1971 J. Fluid Mech. 48, 339.
Reichardt, H. 1938 Messungun turbulenter Schwangkungen, Naturwiss. 26, 404.Google Scholar
Runstadler, P. W., Kline, S. J. & Reynolds, W. C. 1963 An investigation of the flow structure of the turbulent boundary layer. Thermosciences Division, Mech. Engng Dept., Stanford University Rep. MD-8.Google Scholar
Schraub, F. A. & Kline, S. J. 1965 Study of the structure of the turbulent boundary layer with and without longitudinal pressure gradients. Thermosciences Division, Mech. Engng Dept., Stanford University Rep. MD-12.Google Scholar
Townsend, A. A. 1951 Proc. Camb. Phil. Soc. 47, 375.
Townsend, A. A. 1957 The turbulent boundary layer. IUTAM. Symp. Freiburg, pp. 1–15. Springer.
Townsend, A. A. 1961 J. Fluid Mech. 11, 97.
Tritton, D. J. 1967 J. Fluid Mech. 28, 439.
Tu, B. J. & Willmarth, W. W. 1966 An experimental study of the structure of turbulence near the wall through correlation measurements in a thick turbulent boundary layer. University of Michigan Tech. Rep. ORA 02920–3-T.Google Scholar
Wallace, J. M., Eckelmann, H. & Brodkey, R. S. 1972 J. Fluid Mech. 54, 39.
Willmarth, W. W. & Lu, S. S. 1971 Structure of the Reynolds stress near the wall. AGARD Conf. Proc. on Turbulent shear Flow, no. 92, p. 3. (See also 1972 J. Fluid Mech. 55, 65.)Google Scholar
Willmarth, W. W. & Tu, B. J. 1967 Phys. Fluids, 10, S134.
Willmarth, W. W. & Wooldridge, C. E. 1962 J. Fluid Mech. 14, 187.
Willmarth, W. W. & Wooldridge, C. E. 1966 AGARD-NATO Rep. no. 456.
Zaric, Z. 1972 Comptes Rendus, A 275, 513.