Hostname: page-component-76fb5796d-x4r87 Total loading time: 0 Render date: 2024-04-28T03:06:31.643Z Has data issue: false hasContentIssue false
  • English
  • Français

The turbulent radial jet

Published online by Cambridge University Press:  29 March 2006

P. O. Witze  and
H. A. Dwyer
P. O. Witze
Affiliation:
Sandia Laboratories, Livermore, California
H. A. Dwyer
Affiliation:
Department of Mechanical Engineering, University of California, Davis
Get access Rights & Permissions [Opens in a new window]

Abstract

A hot-film anemometer has been used to investigate the mean velocity and turbulence intensity distributions in turbulent radial jets. A geometric parameter termed the constraint ratio, defined as the ratio of nozzle diameter to separation distance, is shown to characterize radial-jet behaviour. Large values of the constraint ratio typify ‘constrained’ radial jets, for which the nozzle walls constrain the flow leaving the orifice to be parallel; a small constraint ratio is representative of two opposing free axisymmetric jets, the collision of which produces an ‘impinged’ radial jet. It is found that the well-behaved constrained radial jet spreads at the same rate as does the familiar plane jet, whereas the impinged radial jet spreads at a rate more than three times as fast. Neither type of radial jet is amenable to a self-similar analytic solution; however, while the impinged jet is shown to require numerical solution techniques, an empirical solution for the constrained jet is demonstrated.

Type
Research Article
Information
Journal of Fluid Mechanics , Volume 75 , Issue 3 , 11 June 1976 , pp. 401 - 417
Copyright
© 1976 Cambridge University Press

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

Abramovich, G. N. 1963 The Theory of Turbulent Jets. MIT Press.
Corbsin, S. 1943 Investigation of flow in an axially symmetrical heated jet of air. N.A.C.A. Wartime Rep. W-94.Google Scholar
Gortler, H. 1942 Berechnung von Aufgaben der freien Turbulenz auf Grund eines neuen Näherungsansatzes Z. angew. Math. Meck. 22, 244–254.Google Scholar
Heskestad, G. 1960 Hot-wire measurements in a radial turbulent jet J. Appl. Mech. 88, 417–424.Google Scholar
Kind, R. J. & Suthanthiran, K. 1973 The interaction of two opposing plane turbulent wall jets J. Fluid Mech. 58, 389–402.Google Scholar
Luna, R. E. 1965 A study of impinging axisymmetric jets and their application to size classification of small particles. Ph.D. dissertation, Princeton University.
Newman, B. G. 1967 Turbulent jets and wakes in a pressure gradient. In Fluid Mechanics of Internal Flow, pp. 170–209. Elsevier.
Parthasarathy, S. P. & Tritton, D. J. 1963 Impossibility of linearizing a hot-wire anemometer for measurements in turbulent flows A.I.A.A. J. 1, 1210–1211.Google Scholar
Poreh, M. & Cermak, J. E. 1959 Flow characteristics of a circular submerged jet impinging normally on a smooth boundary. 6th Midwestern Conf. Fluid Mech., University of Texas, Austin, pp. 198–212.
Rodi, W. 1972 The prediction of free turbulent boundary layers by use of a two-equation-model of turbulence. Ph.D. dissertation, University of London.
Rumer, Yu. B. 1949 Turbulent source of free annular jet Dokl. Akad. Nauk S.S.S.R. 64, 463–466.Google Scholar
Squire, H. B. 1955 Radial jets. 50 Jahre Grenzschichtforschung, pp. 47–54. F. Vieweg & Son.
Taliyev, V. N. 1954 Fundamental principles governing an annular turbulent source Dokl. Akad. Nauk S.S.S.R. 94, 405–408.Google Scholar
Tollmein, W. 1926 Calculation of turbulent expansion processes Z. angew. Math. Mech. 6, 468–478.Google Scholar
Tuve, G. L. 1953 Air velocities in ventilating jets Heat. Pip. Air Cond. 25, 181–192.Google Scholar
Witze, P. O. 1974 A study of impinging axisymmetric turbulent flows: the wall jet, the radial jet, and opposing free jets. Ph.D. dissertation, University of California, Davis.