Hostname: page-component-76fb5796d-vvkck Total loading time: 0 Render date: 2024-04-29T11:38:57.341Z Has data issue: false hasContentIssue false
  • English
  • Français

Boundary-layer transition on a rotating cone in axial flow

Published online by Cambridge University Press:  20 April 2006

R. Kobayashi ,
Y. Kohama  and
M. Kurosawa
R. Kobayashi
Affiliation:
Institute of High Speed Mechanics, Tohoku University, Sendai, Japan
Y. Kohama
Affiliation:
Institute of High Speed Mechanics, Tohoku University, Sendai, Japan
M. Kurosawa
Affiliation:
Turbine Engineering Department, Mitsubishi Heavy Industries Ltd, Tokyo, Japan
Get access Rights & Permissions [Opens in a new window]

Abstract

The purpose of the present paper is to investigate the structure of the laminar–turbulent transition region for the three-dimensional boundary layer along a 30° cone rotating in external axial flow. Spiral vortices, which were assumed as small disturbances in the present stability analysis, are observed experimentally in the transition region. The process of transition to a turbulent boundary layer is visualized in detail. When the ratio of rotational speed to external axial flow is increased, the critical and transition Reynolds numbers decrease remarkably. The spiral angle and the number of vortices appearing on the cone decrease as the rotational speed ratio is increased.

Type
Research Article
Information
Journal of Fluid Mechanics , Volume 127 , February 1983 , pp. 341 - 352
Copyright
© 1983 Cambridge University Press

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

Chin, D.-T. & Litt, M. 1972 An electrochemical study of flow instability on a rotating disk J. Fluid Mech. 54, 613–725.Google Scholar
Gregory, N., Stuart, J. T. & Walker, W. S. 1955 On the stability of three-dimensional boundary layers with application to the flow due to a rotating disk Phil. Trans. R. Soc. Lond. A248, 155–199.Google Scholar
Illingworth, C. R. 1953 The laminar boundary layer of a rotating body of revolution Phil. Mag. 44, 389–403.Google Scholar
Ito, H. et al. 1980 The design and performance of the low-turbulence wind tunnel, Tohoku University (in Japanese) Mem. Inst. High Speed Mech., Tohoku Univ. 44, 93–151.Google Scholar
Kappesser, R., Greif, R. & Cornet, I. 1973 Mass transfer to rotating cones Appl. Sci. Res. 28, 442–452.Google Scholar
Kobayashi, R. 1981 Linear stability theory of boundary layer along a cone rotating in axial flow Bull. Japan Soc. Mech. Engrs 24, 934–940.Google Scholar
Kobayashi, R., Kohama, Y. & Takamadate, CH. 1980 Spiral vortices in boundary layer transition regime on a rotating disk Acta Mech. 35, 71–81.Google Scholar
Koh, J. C. Y. & Price, J. F. 1967 Non-similar boundary-layer heat transfer of a rotating cone in forced flow. Trans. A.S.M.E. C: J. Heat Transfer 89, 139–145.
Koosinlin, M. L., Launder, B. E. & Sharma, B. J. 1974 Prediction of momentum, heat and mass transfer in swirling, turbulent boundary layers. Trans. A.S.M.E. C: J. Heat Transfer 96, 204–209.
Kreith, F. 1966 Frictional drag and convective heat transfer of rotating cones in mixed and turbulent flow. Proc. Heat Transfer and Fluid Mech. Inst. (ed. M. A. Saad & J. A. Miller), pp. 29–43. Stanford University Press.
Mueller, T. J., Nelson, R. C., Kegelman, J. T. & Morkovin, M. V. 1981 Smoke visualization of boundary-layer transition on a spinning axisymmetric body A.I.A.A. J. 19, 1607–1608.Google Scholar
Okamoto, T., Yagita, M. & Kamijima, Y. 1976 Experimental investigation on the boundary-layer flow over rotating cone-cylinder body in a uniform stream Bull. Japan Soc. Mech. Engrs 19, 930–937.Google Scholar
Salzberg, F. & Kezios, S. P. 1965 Mass transfer from a rotating cone in axisymmetric flow. Trans. A.S.M.E. C: J. Heat Transfer 87, 469–476.
Schwarz, K. W., Springett, B. E. & Donnelly, R. J. 1964 Modes of instability in spiral flow between rotating cylinders J. Fluid Mech. 20, 281–289.Google Scholar
Stuart, J. T. 1963 Hydrodynamic stability. In Laminar Boundary Layers (ed. L. Rosenhead), p. 543. Oxford University Press.
Tien, C. L. & Campbell, D. T. 1963 Heat and mass transfer from rotating cones, J. Fluid Mech. 17, 105–112.Google Scholar
Tien, C. L. & Tsuji, I. J. 1965 A theoretical analysis of laminar forced flow and heat transfer about a rotating cone. Trans. A.S.M.E. C: J. Heat Transfer 87, 184–190.Google Scholar