Hostname: page-component-76fb5796d-2lccl Total loading time: 0 Render date: 2024-04-26T10:17:10.410Z Has data issue: false hasContentIssue false
  • English
  • Français

Free-surface cusps associated with flow at low Reynolds number

Published online by Cambridge University Press:  26 April 2006

Jae-Tack Jeong  and
H. K. Moffatt
Jae-Tack Jeong
Affiliation:
Department of Applied Mathematics and Theoretical Physics. University of Cambridge, Silver Street, Cambridge, CB3 9EW, UK Present address: Department of Mechanical Engineering, Kum-Oh National Institute of Technology, 188 Shinpyung Dong, Kumi, Kyung Buk, Republic of Korea, 730-701.
H. K. Moffatt
Affiliation:
Department of Applied Mathematics and Theoretical Physics. University of Cambridge, Silver Street, Cambridge, CB3 9EW, UK
Get access Rights & Permissions [Opens in a new window]

Abstract

When two cylinders are counter-rotated at low Reynolds number about parallel horizontal axes below the free surface of a viscous fluid, the rotation being such as to induce convergence of the flow on the free surface, then above a certain critical angular velocity Ωc, the free surface dips downwards and a cusp forms. This paper provides an analysis of the flow in the neighbourhood of the cusp, via an idealized problem which is solved completely: the cylinders are represented by a vortex dipole and the solution is obtained by complex variable techniques. Surface tension effects are included, but gravity is neglected. The solution is analytic for finite capillary number [Cscr ], but the radius of curvature on the line of symmetry on the free surface is proportional to exp (−32π[Cscr ]) and is extremely small for [Cscr ] [gsim ] 0.25, implying (in a real fluid) the formation of a cusp. The equation of the free surface is cubic in (x, y) with coefficients depending on [Cscr ], and with a cusp singularity when [Cscr ] = ∞.

The influence of gravity is considered through a stability analysis of the free surface subjected to converging uniform strain, and a necessary condition for the development of a finite-amplitude disturbance of the free surface is obtained.

An experiment was carried out using the counter-rotating cylinders as described above, over a range of capillary numbers from zero to 60; the resulting photographs of a cross-section of the free surface are shown in figure 13. For Ω < Ωc, a rounded crest forms in the neighbourhood of the central line of symmetry; for Ω > Ωc, the downward-pointing cusp forms, and its structure shows good agreement with the foregoing theory.

Type
Research Article
Information
Journal of Fluid Mechanics , Volume 241 , August 1992 , pp. 1 - 22
Copyright
© 1992 Cambridge University Press

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

Byrd, P. F. & Friedman M. D. 1971 Handbook of Elliptic integrals for Engineers and Scientists, 2nd Edn. Springer.
Dussan V. E. B. & Davis, S. H. 1974 On the motion of a fluid–fluid interface along a solid surface. J. Fluid Mech. 65, 71–95.Google Scholar
Gradshteyn, I. S. & Ryzhik I. M. 1980 Table of Integrals, Series and Products (Corrected and Enlarged Edn). Academic.
Griggs D. 1939 A theory of mountain building. Am. J. Sci. 237, 611–650.Google Scholar
Joseph D. D., Nelson J., Renardy, M. & Renardy Y. 1991 Two-dimensional cusped interfaces. J. Fluid Mech. 223, 383–409.Google Scholar
Lister J. R. 1989 Selective withdrawal from a viscous two-layer system. J. Fluid Mech. 198, 231–254.Google Scholar
Muskhelishvili N. I. 1953 Some Basic Problems of the Mathematical Theory of Elasticity, 3rd Edn. P. Noordhoff.
Richardson S. 1968 Two-dimensional bubbles in slow viscous flows. J. Fluid Mech. 33, 476–493.Google Scholar
Saffman P. G. 1986 Viscous fingering in Hele-Shaw cells. J. Fluid Mech. 173, 73–94.Google Scholar