Hostname: page-component-76fb5796d-dfsvx Total loading time: 0 Render date: 2024-04-27T19:48:19.710Z Has data issue: false hasContentIssue false
  • English
  • Français

Flow in an open channel capillary

Published online by Cambridge University Press:  26 April 2006

L. A. Romero  and
F. G. Yost
L. A. Romero
Affiliation:
Sandia National Laboratories, Albuquerque, NM 87185-5800. USA
F. G. Yost
Affiliation:
Sandia National Laboratories, Albuquerque, NM 87185-5800. USA
Get access Rights & Permissions [Opens in a new window]

Abstract

The problem of capillary-driven flow in a V-shaped surface groove is addressed. A nonlinear diffusion equation for the liquid shape is derived from mass conservation and Poiseuille flow conditions. A similarity transformation for this nonlinear equation is obtained and the resulting ordinary differential equation is solved numerically for appropriate boundary conditions. It is shown that the position of the wetting front is proportional to (Dt)½ where D is a diffusion coefficient proportional to the ratio of the liquid-vapour surface tension to viscosity and the groove depth, and a function of the contact angle and the groove angle. For flow into the groove from a sessile drop source it is shown that the groove angle must be greater than the contact angle. Certain arbitrarily shaped grooves are also addressed.

Type
Research Article
Information
Journal of Fluid Mechanics , Volume 322 , 10 September 1996 , pp. 109 - 129
Copyright
© 1996 Cambridge University Press

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

Adams, C. M. 1966 Spreading, penetration, and capillary flow in metallic systems. In Fundamental Phenomena in the Materials Sciences, Vol. 2 (ed. L. J. Bonis & H. H. Hausner), p. 175. Plenum.
Bascom, W. D., Cottington, R. L. & Singleterry, C. R. 1964 Dynamic surface phenomena in the spontaneous spreading of oils on solids. In Contact Angle, Wettability, and Adhesion (ed. R. F. Gould), p. 355. American Chemical Society.
Bell, J. M. & Cameron, F. K. 1906 Movement of liquids through capillary tubes. J. Phys. Chem. 10, 658.Google Scholar
Concus, P. & Finn, R. 1969 On the behavior of a capillary surface in a wedge. Proc. Natl Acad. Sci. 63, 292.Google Scholar
Cottington, R. L., Murphy, C. M. & Singleterry, C. R. 1964 Effect of polar-nonpolar additives on oil spreading on solids, with applications to nonspreading oils. In Contact Angle, Wettability, and Adhesion (ed. R. F. Gould), p. 341. American Chemical Society.
Lenormand, R. & Zarcone, C. 1984 Role of roughness and edges during imbibation in square capillaries. In 59th Annual Technical Conference and Exhibition. Society of Petroleum Engineering.
Parker, E. R. & Smoluchowski, R. 1944 Capillarity of metallic surfaces. Trans. ASME 35, 362.Google Scholar
Shepard, J. W. & Bartell, F. E. 1953 Surface roughness as related to hysterisis of contact angles. III. J. Phys. Chem. 57, 458.Google Scholar
Shuttleworth, R. & Bailey, G. L. J. 1948 The spreading of a liquid over a rough solid. Disc. Farad. Soc. 3, 16.Google Scholar
Washburn, E. W. 1921 The dynamics of capillary flow. Phys. Rev. 17, 273.Google Scholar