Hostname: page-component-848d4c4894-nr4z6 Total loading time: 0 Render date: 2024-05-16T21:25:50.853Z Has data issue: false hasContentIssue false

Fuzzy Logic-based Techniques for Motion Planning of a Robot Manipulator Amongst Unknown Moving Obstacles

Published online by Cambridge University Press:  09 March 2009

Anupam Bagchi
Affiliation:
Department of Mechanical Engineering, Indian Institute of Technology, Kanpur, 208 016 (India)
Himanshu Hatwal
Affiliation:
Department of Mechanical Engineering, Indian Institute of Technology, Kanpur, 208 016 (India)

Summary

An algorithm for kinematic motion planning of redundant planar robots, having revolute joints, in an unknown dynamic environment is presented. Distance ranging sensors, mounted on the body of each manipulator link, are simulated here to estimate the proximity of an obstacle. The sensory data is analyzed through a fuzzy controller which estimates whether a collision is imminent, and if so, employs a geometric approach to compute the joint movements necessary to avoid the collision. Obstacles can sometimes move uncompromisingly in the environment attempting a deliberate collision. Strategies to deal with such cases are presented and recovery procedures to circumvent the obstacle from tight corners are suggested. Cases of link overlap have been avoided by considering each link as a body which is sensed as an obstacle by every other link of the same manipulator. Suitable examples are presented to demonstrate the algorithm.

Type
Research Article
Copyright
Copyright © Cambridge University Press 1992

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1.Lozano-Perez, T., “Spatial Planning: A Configuration Space ApproachIEEE Trans. Comp. C–32, 108120 (02, 1983).CrossRefGoogle Scholar
2.Khatib, O., “RealC–time obstacle avoidance for manipulators and mobile robotsInt. J. Robotics Research 5(1), 9098 (1986).CrossRefGoogle Scholar
3.Canny, John F., “The Complexity of Robot Motion Planning” Ph. D Dissertation (Department of Electrical Engineering and Computer Science, MIT, Cambridge, MA, 1987).Google Scholar
4.Volpe, R. and Khosla, P., “A strategy for obstacle avoidance and approach using super quadrics potential functions” Robotics Research, The Fifth International Symposium 445452 (1989).Google Scholar
5.Lumelsky, V.J. and Stepanov, A.A., “Dynamic Path Planning for a mobile Automaton with Limited Information on the EnvironmentIEEE Transactions on Automatic Control AC–31, No. 11, 10581063 (11, 1986).CrossRefGoogle Scholar
6.Lumelsky, V.J., “Dynamic Path Planning for a Planar Articulated Robot Arm Moving Amidst Unknown ObstaclesAutomatica J. Int. Fed. Automatic Control (IFAC) 551570 (09 1987).Google Scholar
7.J, Vladmir.. Lumelsky, “Effect of Kinematics on Dynamic Path Planning for Planar Robot Arms Moving Amidst Unknown ObstaclesIEEE J. Robotics and Automation RA–3, No. 3, 207223 (06, 1987).Google Scholar
8.Sun, K. and Lumelsky, V., “Computer simulation of sensor-based robot collision avoidance in an unknown environmentRobotica 5, Part 4, 291302 (12 1987).CrossRefGoogle Scholar
9.Lumelsky, Vladimir and Sun, Kang, “A Unified Methodology for Motion Planning with Uncertainty for 2D and 3D Two–Link Robot Arm ManipulatorsInt. J. Robotics Research 9, No. 5, 89104 (10, 1990).CrossRefGoogle Scholar
10.Sun, Kang and Lumelsky, V., “Motion Planning with Uncertainty for a 3d Cartesian Robot Arm” Robotics Research, The Fifth International Symposium 417424 (1989).Google Scholar
11.Bagchi, A. and Hatwal, H., “A solution strategy for collision avoidance of multiple bodies moving on a plane using fuzzy logic” Proc. Int. Sym. Intelligent Robotics, Bangalore (01, 1991).Google Scholar
12.Novák, V., Fuzzy Sets and their Applications (Adam Hilger, Bristol, 1989).Google Scholar
13.Zadeh, L.A., “Outline of a New Approach to the Analysis of Complex System and Decision ProcessesIEEE Trans, on System Man and Cybernetics, SMC–3, No. 1, 2844 (1973).Google Scholar