Hostname: page-component-76fb5796d-x4r87 Total loading time: 0 Render date: 2024-04-29T19:26:54.873Z Has data issue: false hasContentIssue false
  • English
  • Français

Integration of numerical and field-theoretical techniques in the design of single- and multi-band rectennas for micro-power generation

Published online by Cambridge University Press:  01 July 2010

Vittorio Rizzoli ,
Alessandra Costanzo ,
Diego Masotti  and
Francesco Donzelli
Vittorio Rizzoli
Affiliation:
DEIS, University of Bologna, viale Risorgimento 2, 40136, Bologna.
Alessandra Costanzo*
Affiliation:
DEIS – II School of Engineering, Cesena Campus, University of Bologna, Via Venezia 52 Cesena (FC), Italy.
Diego Masotti
Affiliation:
DEIS, University of Bologna, viale Risorgimento 2, 40136, Bologna.
Francesco Donzelli
Affiliation:
DEIS, University of Bologna, viale Risorgimento 2, 40136, Bologna.
*
Corresponding author: A. Costanzo Email: alessandra.costanzo@unibo.it
Get access Rights & Permissions [Opens in a new window]

Abstract

We introduce an integrated design methodology for the optimization of RF-to-DC conversion efficiency of multi-band rectennas (rectifying antennas), with the aim of harvesting the RF energy available in humanized environments. Existing RF sources can either operate at known frequencies, power budgets, and locations, or can be ubiquitously available at different frequency bands, and with unknown directions of incidence and polarizations. In all cases, the RF link power budget may be extremely low. In order to harvest a significant quantity of energy, it is thus mandatory to place a very special care in the design of each part of the receiving/storing system. For this purpose, the receiving antenna must be optimized together with the rectifying circuit and the load. In our work, this is accomplished by a rigorous design tool based on the concurrent use of nonlinear/electromagnetic (EM) CAD tools and EM theory. The effectiveness of the method is demonstrated by comparing the computed and measured performance of single- and multi-band rectennas, both linearly and circularly polarized. Such antennas are designed to harvest RF energy from a variety of cellular and WiFi systems that are normally present in civil environments.

Keywords

RF energy harvestingco-designEM theoryEM simulationRF to DC conversion efficiency
Type
Original Article
Information
International Journal of Microwave and Wireless Technologies , Volume 2 , Special Issue 3-4: European Microwave Week 2009 , August 2010 , pp. 293 - 303
Copyright
Copyright © Cambridge University Press and the European Microwave Association 2010

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

[1]Rizzoli, V.; Costanzo, A.; Rubini, M.; Masotti, D.: Investigation of interactions between passive RFid tags by means of nonlinear/EM co-simulation, in Proc. 36th European Microwave Conference, 2006, 722–725.Google Scholar
[2]Curty, J.P.; Joehl, N.; Dehollain, C.; Declercq, M.J.: Remotely powered addressable UHF RFID integrated system. IEEE J. Solid-State Circuits, 40(11) (2005), 2193–2202.Google Scholar
[3]Shinohara, N.; Matsumoto, H.: Experimental study of large rectenna array for microwave energy transmission, IEEE Trans. Microw. Theory Tech., 46 (1998), 261–267.Google Scholar
[4]Rizzoli, V.; Bichicchi, G.; Costanzo, A.; Donzelli, F.; Masotti, D.: CAD of multi-resonator rectenna for micro-power generation, in Proc. 39th European Microwave Conference, Rome, 2009, 1684–1687.Google Scholar
[5]Hagerty, J. et al. : Recycling ambient microwave energy with broad-band rectenna array, IEEE Trans. Microw. Theory Tech., 46 ( 2004), 1014–1024.Google Scholar
[6]Douyere, A.; Lan Sun Luk, J.D.; Alicalapa, F.: High efficiency microwave rectenna circuit: modelling and design. Electron. Lett., 44(24) (2008), 1409–1410.Google Scholar
[7]Rizzoli, V.; Costanzo, A.; Masotti, D.; Lipparini, A.; Mastri, F.: Computer aided optimization of nonlinear microwave circuits with the aid of electromagnetic simulation. IEEE Trans. Microw. Theory Tech., 52(1) (2004), 362–377.Google Scholar
[8]Rizzoli, V.; Costanzo, A.; Masotti, D.; Spadoni, P.: Prediction of the end-to-end performance of a microwave/RF link by means of nonlinear/electromagnetic co-simulation. IEEE Trans. Microw. Theory Tech., 54(12), (2006) 4149–4160.Google Scholar
[9]Essel, J.; Brenk, D.; Heidrich, J.; Weigel, R.: A Highly Efficient UHF RFID Frontend Approach, IEEE MTT-S International Microwave Workshop on Wireless Sensing, Local Positioning, and RFID (IMWS 2009 – Croatia). Digest of Papers, 2009, 1–4.Google Scholar
[10]Sze, J-Y.; Wong, K-L.; Huang, C.-C.: Coplanar waveguide-fed square slot antenna for broadband circularly polarized radiation. IEEE Trans. Antennas Propag., 51(8) (2003), 2141–2144.Google Scholar
[11]Guo, et al. : Improved wide-band Schiffman phase shifter. IEEE Trans. Microw. Theory Tech., 54(3) (2006), 1196–1200.Google Scholar
[12]Costanzo, A.; Fabiani, M.; Romani, A.; Masotti, D.; Rizzoli, V.: Co-design of ultra low power RF/microwave receivers and converters for RFID and energy harvesting applications, in 2010 IEEE MTT-S International Microwave Symposium Digest (Anaheim). Digest of papers, 2010, 1768–1771.Google Scholar