Hostname: page-component-7c8c6479df-fqc5m Total loading time: 0 Render date: 2024-03-29T11:27:31.268Z Has data issue: false hasContentIssue false

Induced flow due to blowing and suction flow control: an analysis of transpiration

Published online by Cambridge University Press:  25 November 2011

James D. Woodcock*
Affiliation:
Department of Mathematics and Statistics, University of Melbourne, Melbourne, Vic 3010, Australia Department of Mechanical Engineering, University of Melbourne, Melbourne, Vic 3010, Australia
John E. Sader
Affiliation:
Department of Mathematics and Statistics, University of Melbourne, Melbourne, Vic 3010, Australia
Ivan Marusic
Affiliation:
Department of Mechanical Engineering, University of Melbourne, Melbourne, Vic 3010, Australia
*
Email address for correspondence: j.woodcock@student.unimelb.edu.au

Abstract

It has previously been demonstrated that the drag experienced by a Poiseuille flow in a channel can be reduced by subjecting the flow to a dynamic regime of blowing and suction at the walls of the channel (also known as ‘transpiration’). Furthermore, it has been found to be possible to induce a ‘bulk flow’, or steady motion through the channel, via transpiration alone. In this work, we derive explicit asymptotic expressions for the induced bulk flow via a perturbation analysis. From this we gain insight into the physical mechanisms at work within the flow. The boundary conditions used are of travelling sine waves at either wall, which may differ in amplitude and phase. Here it is demonstrated that the induced bulk flow results from the effect of convection. We find that the most effective arrangement for inducing a bulk flow is that in which the boundary conditions at either wall are equal in magnitude and opposite in sign. We also show that, for the bulk flow induced to be non-negligible, the wavelength of the boundary condition should be comparable to, or greater than, the height of the channel. Moreover, we derive the optimal frequency of oscillation, for maximising the induced bulk flow, under such boundary conditions. The asymptotic behaviour of the bulk flow is detailed within the conclusion. It is found, under certain caveats, that if the amplitude of the boundary condition is too great, the bulk flow induced will become dependent only upon the speed at which the boundary condition travels along the walls of the channel. We propose the conjecture that for all similar flows, if the magnitude of the transpiration is sufficiently great, the bulk flow will depend only upon the speed of the boundary condition.

Type
Papers
Copyright
Copyright © Cambridge University Press 2011

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Aamo, O. M., Krstić, K. & Bewley, T. R. 2003 Control of mixing by boundary feedback in two-dimensional channel flow. Automatica 39, 15971606.CrossRefGoogle Scholar
2. Batchelor, B. K. 1967 An Introduction to Fluid Dynamics. Cambridge University Press.Google Scholar
3. Bewley, T. R. 2001 Flow control: new challenges for a new renaissance. Prog. Aerosp. Sci. 37, 21.CrossRefGoogle Scholar
4. Bewley, T. R. 2009 A fundamental limit on the balance of power in a transpiration-controlled channel flow. J. Fluid Mech. 632, 443446.CrossRefGoogle Scholar
5. Choi, H., Moin, P. & Kim, J. 1994 Active turbulence control for drag reduction in wall-bounded flows. J. Fluid Mech. 262, 75110.CrossRefGoogle Scholar
6. Cortelezzi, L., Lee, K., Kim, J. & Speyer, J. L. 1998 Skin-friction drag reduction via robust reduced-order linear feedback control. Intl J. Comput. Fluid Dyn. 11, 79.CrossRefGoogle Scholar
7. Fukagata, K., Iwamoto, K. & Kasagni, N. 2002 Contribution of Reynolds stress distribution to the skin friction in wall-bounded flows. Phys. Fluids 14, L73L76.CrossRefGoogle Scholar
8. Fukagata, K., Sugiyama, K. & Kasagi, N. 2009 On the lower bound of net driving power in controlled duct flows. Physica D 238, 10821086.Google Scholar
9. von Helmholtz, H. 1868 Ueber die thatsächlichen grundlagen der geometrie. Verh. des naturh.-med. Vereins zu Heidelberg 5, 1.Google Scholar
10. Hoepffner, J. & Fukagata, K. 2009 Pumping or drag reduction? J. Fluid Mech. 635, 171187.CrossRefGoogle Scholar
11. Karniadakis, G. E. & Choi, K.-S. 2003 Mechanisms on transverse motions in turbulent wall flows. Annu. Rev. Fluid Mech. 35, 4562.CrossRefGoogle Scholar
12. Ladyzhenskaya, O. A. 1958 Global solvability of a boundary value problem for the Navier–Stokes equations in the case of two spacial dimensions. Dokl. Akad. Nauk SSSR 123, 427429.Google Scholar
13. Ladyzhenskaya, O. A. 1963 The Mathematical Theory of Viscous Incompressible Flows. Gordon and Breach.Google Scholar
14. Lee, C., Min, T. & Kim, J. 2008 Stability of a channel flow subject to wall blowing and suction in the form of a travelling wave. Phys. Fluids 20, 101513.CrossRefGoogle Scholar
15. Lieu, B. K., Moarref, R. & Jovanović, M. 2010 Controlling the onset of turbulence by streamwise travelling waves. Part 2. Direct numerical simulation. J. Fluid Mech. 663, 100119.CrossRefGoogle Scholar
16. Mamori, H., Fukagata, K. & Hoepffner, J. 2010 Phase relationship in laminar channel flow controlled by travelling-wave-like blowing or suction. Phys. Rev. E 81, 046304.Google Scholar
17. Marusic, I., Joseph, D. D. & Mahesh, K. 2007 Laminar and turbulent comparisons for channel flow and flow control. J. Fluid Mech. 570, 467477.CrossRefGoogle Scholar
18. Min, T., Kang, S., Speyer, J. L. & Kim, J. 2006 Sustained sub-laminar drag in a fully developed channel flow. J. Fluid Mech. 558, 81100.Google Scholar
19. Moarref, R & Jovanović, M. 2010 Controlling the onset of turbulence by streamwise travelling waves. Part 1. Receptivity analysis. J. Fluid Mech. 663, 7099.Google Scholar
20. Riley, N. 2001 Steady streaming. Annu. Rev. Fluid Mech. 33, 4365.CrossRefGoogle Scholar
21. Stokes, G. G. 1851 On the effect of the internal friction of fluids on the motion of pendulums. Trans. Camb. Phil. Soc. 9, 8106.Google Scholar
22. Toms, B. A. 1948 Some observations on the flow of linear polymer solutions through straight tubes at large Reynolds numbers. In Proceedings of the 1st International Congress on Rheology, 2, pp. 135141. North Holland.Google Scholar
23. Warholic, M. D., Schmidt, G. M. & Hanratty, T. J. 1999 The influence of a drag-reducing surfactant on a turbulent velocity field. J. Fluid Mech. 388, 120.Google Scholar
24. White, C. M. & Mungal, M. G. 2008 Mechanics and prediction of turbulent drag reduction with polymer additives. Annu. Rev. Fluid Mech. 40, 235256.CrossRefGoogle Scholar
25. Whittaker, R. J., Heil, M., Boyle, J., Jensen, O. E. & Walters, S. L. 2010a The energetics of flow through a rapidly oscillating tube. Part 2. Application to an elliptical tube. J. Fluid Mech. 648, 123153.Google Scholar
26. Whittaker, R. J., Waters, S. L., Jensen, O. E., Boyle, J. & Heil, M. 2010b The energetics of flow through a rapidly oscillating tube. Part 1. General theory. J. Fluid Mech. 648, 83121.Google Scholar
27. Woodcock, J. D., Sader, J. E. & Marusic, I. 2010 On the maximum drag reduction due to added polymers in Poiseuille flow. J. Fluid Mech. 659, 473483.Google Scholar