Abstract
The excavation of foundations, general earthworks and earth removal tasks are activities which involve the machine operator in a series of repetitive operations, suggesting opportunities for the automation through the introduction of robotic technologies with subsequent improvements in machine utilisation and throughput. The automation of the earth removal process is also likely to provide a number of other benefits such as a reduced dependence on operator skills and a lower operator work load, both of which might be expected to contribute to improvements in quality and, in particular, the removal of the need for a local operator when working in hazardous environments.
The Lancaster University Computerised Intelligent Excavator or LUCIE has demonstrated the achievement of automated and robotic excavation through the implementation of an integrated, real-time, artificial intelligence based control system utilising a novel form of motion control strategy for movement of the excavator bucket through ground. Having its origins in the systematic observation of a range of machine operators of differing levels of expertise, the control strategy as evolved enables the autonomous excavation of a high quality rectangular trench in a wide variety of types and conditions of ground and the autonomous removal of obstacles such as boulders along the line of that trench.
The paper considers the development of the LUCIE programme since its inception and sets out in terms of the machine kinematics the evolution and development of the real-time control strategy from an implementation on a one-fifth scale model of a back-hoe arm to a full working system on a JCB801 360° tracked excavator.
Similar content being viewed by others
References
Singh, S.: A survey of automation in excavation, submitted to Journal of Mining and Material Processing, Institute of Japan.
Vähä, P. K., Skibniewski, M. J., and Koivo, A. J.: Kinematics and trajectory planning for robotic excavation, in: Proc. Construction Congress 91, 1991, pp. 787–793.
Apte, S. M. and Oppenheim, I. J.: Planning intricate robot motions to remove natural materials, in: ASCE Conf. on Robots for Challenging Environments, 1994, pp. 106–114.
Huang, X. D and Bernold, L. E.: Control model for robot backhoe excavation and obstacle handling, in: ASCE Conf. On Robots for Challenging Environments, 1994, pp. 131–139.
Koivo, A. J., Thoma, B., Kocaoglan, E., and Andrade-Cetto, J.: Modelling and control of excavator dynamics during digging operation, Journal of Aerospace Engineering 9(1) (1996), 10 pp.
Shi, X., Lever, P., and Wang, F.: Experimental robotic excavation with fuzzy logic and neural networks, in: IEEE Int. Conf. on Robotics and Automation, Minneapolis, 1996, pp. 957–962.
Lever, P., Wang, F., Shi, X., and Chen, D.: A fuzzy behaviour approach for controlling mining excavator bucket/rock interactions, in: IEEE Industrial Applications Society 29th Annual Meeting, Denver, 1994, pp. 2126–2133.
Herman, H. and Stenz, A.: Active surface/subsurface perception for autonomous excavation, in: Conf. on Sensor Fusion and Aerospace Applications, 1994, pp. 154–167.
Minamoto, M., Nakayama, K., Aokage, H., and Sako, S.: Development of a tele-earthwork system, in: 11th International Symposium on Automation and Robotics in Construction, Brighton, 1994, pp. 269–275.
Wakefield, R. R. and O'Brien, J. B.: A virtual reality type simulation system for construction automation development, in: 11th International Symposium on Automation and Robotics in Construction, Brighton, 1994, pp. 239–247.
Wohlford, W. P., Bode, B. D., and Griswold, F. D.: New capability for remotely controlled excavation, in: Proc. 1990 Winter Meeting of the American Nuclear Society, 1990, pp. 628–629.
Burks, B. L., Killough, S. M., and Thompson, D. H.: Remote excavation using the telerobotic small emplacement excavator, in: Proc. 1992 Winter Meeting of the American Nuclear Society, 1992, pp. 559–560.
Bernold, L. E.: Experimental studies on the Mechanics of Lunar Excavation, ASCE Journal of Aerospace Engineering 4(1) 1991, 9 pp.
Lever, P., Wang, F., and Chen, D.: Control model for robot backhoe excavation and obstacle handling, in: ASCE Conf. on Robots for Challenging Environments, 1994, pp. 97–105.
Nease, A. D. and Alexander, E. F.: Air Force construction automation and robotics, in: 10th International Symposium on Automation and Robotics in Construction, Houston, 1993, pp. 341–346.
Crane, C., Cunningham, S., Armstrong, D., Rankin, A., Novick, D., Wit, J., and Duffy, J.: Development of an autonomous navigation and teleremote mapping system, in: Mechatronics' 96 + M2VIP'96, Guimarães, Vol. 1, 1996, pp. 5–10.
Bradley, D. A. and Seward, D. W.: The Lancaster University Computerised intelligent excavator programme, IMechE Conf. on Mechatronics – Designing Intelligent Machines, Dundee, September 1992, pp. 163–168. JINT1346.tex; 18/11/1997; 11:41; v.7; p.24
Bradley, D. A., Seward, D. W., Mann, J. E., and Goodwin, M. R.: Artificial intelligence in the control and operation of construction plant – the autonomous robot excavator, Automation in Construction 2 (1993), 217–228.
Eisenstadt, M. and Brayshaw, M.: A knowledge engineering toolkit, Byte (October 1990), 268–282.
Ginsberg, M.: Essentials of Artificial Intelligence, Morgan Kaufman, 1993.
Green, P., Seward, D. W., and Bradley, D. A.: Knowledge acquisition for a robot excavator, in: 7th International Symposium on Automation and Robotics in Construction, Bristol, 1990, pp. 351–357.
Zenelin, A. N., Balovnev, V. I., and Kerov, I. P.: Machines for Moving the Earth, A. A. Balkema (Pub.), Rotterdam, 1987.
Malaguti, F.: Soil cutting model developed by dynamic system identification methods, in: 11th Int. ISTVS Conf., Lake Tahoe, September 1993.
Jarzebowski, A., Maciejewski, M., Szyba, D., and Trampczynski, W.: The optimisation of tools shapes and trajectories in heavy machines, in: Proc. 12th Intl. Symposium on Automation and Robotics in Construction, Warsaw, 1995, pp. 159–166.
Kumura, T., Takemura, J., Hiro-oka, A., and Okamura, M.: Excavation in soft clay using an inflight excavator, Int. Conf. Centrifuge'94, 1994, pp. 646–654.
Hemami, A. and Goulet, S.: Resistance of particulate media to excavation: Application to bucket loading, International Journal of Surface Mining, Reclamation and Environment 8(1994), 125–129.
British Gas, Personal communication to authors.
Seward, D. W., Bradley, D. A., and Bracewell, R. H.: Research models for automatic excavation, in: 5th Int. Symposium on Automation and Robotics in Construction, Tokyo, 1988, pp. 703–709.
Bradley, D. A., Seward, D. W., Heikkilä, T., and Vähä, P.: Control architectures and operational strategies for intelligent, high-powered manipulators, in: Proc. 11th Int. Symposium on Automation and Robotics in Construction, Brighton, 1994, pp. 367–372.
Seward, D. W., Bradley, D. A., Mann, J. E., and Goodwin, M. R.: Controlling an intelligent excavator for digging in difficult ground, in: 9th Int. Symposium on Automation and Robotics in Construction, Tokyo, 1992, pp. 743–750.
EN 292–1: Safety of Machinery – Basic Concepts, General Principles for Design, Part 1: Basic terminology, methodology, 1991. EN 292–2: Safety of Machinery–Basic Concepts, General Principles for Design, Part 2: Technical principles and specifications, 1991.
Seward, D. W., Bradley, D. A., and Margrave, F.: Hazard analysis techniques for large mobile robots, in: 11th Int. Symposium on Automation and Robotics in Construction, Brighton, 1994, pp. 35–42.
Seward, D. W., Ward, J., Findlay, J., and Kinniburgh, H.: The automation of piling rig positioning using satellite GPS, in: 13th Int. Symposium on Automation and Robotics in Construction, Tokyo, 1996, pp. 223–230. JINT1346.tex; 18/11/1997; 11:41; v.7; p.25
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Bradley, D.A., Seward, D.W. The Development, Control and Operation of an Autonomous Robotic Excavator. Journal of Intelligent and Robotic Systems 21, 73–97 (1998). https://doi.org/10.1023/A:1007932011161
Issue Date:
DOI: https://doi.org/10.1023/A:1007932011161