Skip to main content
Log in

Engineering the Virtual Enterprise: An Architecture-Driven Modeling Approach

  • Published:
International Journal of Flexible Manufacturing Systems Aims and scope Submit manuscript

Abstract

The managerial and organization practices required by an increasingly dynamic competitive manufacturing, business, and industrial environment include the formation of “virtual enterprises.” A major concern in the management of virtual enterprises is the integration and coordination of business processes contributed by partner enterprises. The traditional methods of process modeling currently used for the design of business processes do not fully support the needs of the virtual enterprise. The design of these virtual enterprises imposes requirements that make it more complex than conventional intraorganizational business process design. This paper first describes an architecture that assists in the design of the virtual enterprise. Then it discusses business process reengineering (BPR) as a methodology for modeling and designing virtual organizations. While BPR presents many useful tools, the approach itself and the modeling tools commonly used for redesign have fundamental shortcomings when dealing with the virtual enterprise. However, several innovative modeling approaches provide promise for this problem. The paper discusses some of these innovative modeling approaches, such as object-oriented modeling of business processes, agent modeling of organizational players, and the use of ontological modeling to capture and manipulate knowledge about the players and processes. The paper concludes with a conceptual modeling methodology that combines these approaches under the enterprise architecture for the design of virtual enterprises.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Similar content being viewed by others

References

  • Automation and Robotics Research Institute, Operate a Small Manufacturing Enterprise, Automation & Robotics Research Institute, Fort Worth, TX (1990).

    Google Scholar 

  • Barnett, W., Presley, A., and Liles, D., “Object-Oriented Process Modeling for theVirtual Enterprise, ” Proceedings of the Fourth Agility Forum Conference, Atlanta, GA (1995).

  • Benjamin, P., Menzel, C., Mayer, R., and Padmanaban, N., “Toward a Method for Acquiring CIM Ontologies, ” International Journal of Computer Integrated Manufacturing, Vol. 8, No. 3, pp. 225–234 (1995).

    Google Scholar 

  • Curtis, B., Kellner, M., and Over, J., “Process Modeling, ” Communications of the ACM, Vol. 35, No. 9, pp. 75–90 (1992).

    Google Scholar 

  • Davenport, T. and Short, J., “The New Industrial Engineering: Information Technology and Business Process Redesign, ” Sloan Management Review, Vol. 32, No. 5, pp. 554–571 (1990).

    Google Scholar 

  • Fox, M., Chionglo, J., and Barbuceanu, M., The Integrated Supply Chain Management System, Enterprise Integration Lab, Toronto, CA (1993).

    Google Scholar 

  • Fox, M., Gruninger, M., and Zhan, Y., “Enterprise Engineering: An Information Systems Perspective, ” Proceedings of the Third Industrial Engineering Research Conference, Atlanta, GA (1994).

  • Giaglis, G., Paul, R., and Doukidis, G., “Simulation for Intra-and Inter-Organisational Business Process Modelling, ” in: Proceedings of the 1996 Winter Simulation Conference, San Diego, CA, pp. 1297–1304 (1996).

  • Gruninger, M. and Fox, M., “Methodology for the Design and Evaluation of Ontologies, ” Workshop on Basic Ontological Issues in Knowledge Sharing—IJCAI-95, Montreal, Quebec (1995).

  • Hammer, M. and Champy, J., Re-engineering the Corporation: A Manifesto for Business Revolution, Harper Business, New York (1993).

    Google Scholar 

  • Harrington, H., “Process Breakthrough: Business Process Improvement, ” Journal of Cost Management, pp. 30–43 (Fall 1993).

  • Hayes-Roth, B., “Opportunistic Control of Action in Intelligent Agents, ” IEEE Transactions on Systems, Man, and Cybernetics, Vol. SMC-23, No. 6, pp. 1575–1587 (1994).

    Google Scholar 

  • Jacobson, I., Ericsson, M., and Jacobson, A., The Object Advantage: Business Process Reengineering with Object Technology, Addison-Wesley, Reading, MA (1995).

    Google Scholar 

  • Koestler, A., The Ghost in the Machine, Arkana Books, London (1989 [1967]).

    Google Scholar 

  • Liles, D., Johnson, M., and Meade, L., “The Enterprise Engineering Discipline, ” Proceedings of the Fifth Industrial Engineering Research Conference, Minneapolis, MN (1996).

  • Lin, G. and Solberg, J., “Integrated Shop Floor Control Using Automomous Agents, ” IIE Transactions, Vol. 24, No. 3, pp. 57–71 (1992).

    Google Scholar 

  • Mayer, R., Benjamin, P., Caraway, B., and Painter, M., “A Framework and Suite of Methods for Business Process Reengineering, ” in: Business Process Change: Reengineering Concepts, Methods, and Technologies, V. Grover and W. Kettinger (Eds.), Idea Group Publishing, Harrisburg, PA, pp. 291–329 (1995).

    Google Scholar 

  • Mayer, R., Painter, M., and deWitte, P., IDEF Family of Methods for Concurrent Engineering and Business Re-engineering Applications, Knowledge Based Systems, Inc, College Station, TX (1992).

    Google Scholar 

  • National Center for Manufacturing Sciences, Strawman Enterprise Reference Model, National Center for Manufacturing Sciences, Ann Arbor, MI (1992).

    Google Scholar 

  • Parunak, V.,Workshop Report: Implementing Manufacturing Agents, National Center for Manufacturing Sciences, Ann Arbor, MI (1996).

  • Raja, M. and Barnett, W., “An Object-Oriented Approach to Enterprise Engineering, ” Journal of Engineering Valuation and Cost Analysis, forthcoming (2001).

  • Rajan, V., “An Agent-Based Fractal Model of Agile Manufacturing Enterprises: Modeling and Decision-Making Issues, ” Proceedings of the Artificial Intelligence and Manufacturing Workshop, Albuquerque, NM (1996).

  • Swaminathan, J., Smith, S., and Sadeh, N., “A Multi-Agent Framework for Modeling Supply Chain Dynamics, ” Proceedings of the Artificial Intelligence and Manufacturing Workshop, Albuquerque, NM (1996).

  • Taylor, D., Business Engineering with Object Technology, John Wiley & Sons, New York (1995).

    Google Scholar 

  • Uschold, M., King, M., Moralee, S., and Zorgios, Y., The Enterprise Ontology, Artificial Intelligence Applications Institute, Edinburgh, Scotland (1995).

    Google Scholar 

  • Vernadat, F., Enterprise Modeling and Integration, Chapman & Hall, London (1996).

    Google Scholar 

  • Winkler, M. and Mey, M., “Holonic Manufacturing Systems, ” European Production Engineering, Vol. 18, Nos. 3–4, pp. 10–12 (1994).

    Google Scholar 

  • Workflow Management Coalition (WfMC), on-line, http://www.aiim.org/wfmc/ (1999).

Download references

Author information

Authors and Affiliations

Authors

Rights and permissions

Reprints and permissions

About this article

Cite this article

Presley, A., Sarkis, J., Barnett, W. et al. Engineering the Virtual Enterprise: An Architecture-Driven Modeling Approach. International Journal of Flexible Manufacturing Systems 13, 145–162 (2001). https://doi.org/10.1023/A:1011131417956

Download citation

  • Issue Date:

  • DOI: https://doi.org/10.1023/A:1011131417956

Navigation