Abstract
Clay-modified styrene-butadiene-styrene (SBS) rubber is utilized to toughen polypropylene (PP). The SBS rubber is found to have good compatibility with clay particles. SBS rubber helps to finely disperse clay particles in PP matrix. Mode-I fracture mechanisms are investigated using optical microscopy and transmission electron microscopy techniques. Rubber particle cavitation and matrix shear yielding are found to be the main toughening mechanisms in PP/SBS system. In the case of PP/SBS/clay system, widespread rubber particle cavitation, which appears to be facilitated by the presence of clay particle inclusions inside the SBS rubber particles, takes place in the PP matrix. This, in turn, leads to the formation of a bigger shear yielded zone in PP matrix. As a result, an enhanced toughness is observed.
Similar content being viewed by others
References
B. Z. JANG, D. R. UHLMANN and J. B. V. SANDE, Polym. Eng. Sci. 25 (1985) 643.
B. Z. JANG, J. Appl. Polym. Sci. 30 (1985) 2485.
H. H. KAUSCH, R. GENSLER, C. H. GREIN, C. J. G. PLUMMER and P. SCARAMUZZINO, J. Macromol. Sci.-Phys. B 38(5/6) (1999) 803.
Y. YOKOYAMA and T. RICCO, Polymer 39 (1998) 3675.
G.-X. WEI and H.-J. SUE, Polym. Eng. Sci. 40 (2000) 1979.
G.-M. KIM and G. H. MICHLER, Polymer 39 (1998) 5699.
R. GENSLER, Ph.D. thesis 1863, EPFL, Lausanne, Switzerland, 1998.
A. VAN DER WAL and R. J. GAYMANS, Polymer 40 (1999) 6067.
Idem., ibid. 40 (1999) 6031.
Idem., ibid. 40 (1999) 6057.
A. F. YEE and R. A. PEARSON, J. Mater. Sci. 21 (1986) 2462.
Idem., ibid. 21 (1986) 2475.
A. F. YEE, D. LI and X. LI, ibid. 28 (1993) 6392.
G.-X. WEI, H.-J. SUE, J. CHU, C. HUANG and K. GONG, Polymer 41 (2000) 2947.
Idem., J. Mater. Sci. 35 (2000) 555.
G.-M. KIM, G. H. MICHLER, J. ROSCH and R. MIILHAUPI, Acta Polymer 49 (1998) 88.
G. RADONJIC, J. Appl. Poly. Sci. 72 (1999) 291.
H. X. NGUYEN and H. ISHIDA, Polym. Compos. 8 (1987) 57.
H. MENENDEZ and J. L. WHITE, Polym. Eng. Sci. 24 (1984) 1051.
M. C. LEE and C. H. TENSA, J. Adhes Sci. Tech. 3 (1989) 291.
W. Y. CHIANG, W. D. YANG and B. PUKANSZKY, Polym. Eng. Sci. 32 (1992) 641.
Y.-C. OU, T.-T. GUO, X.-P. FANG and Z.-Z. YU, J. Appl. Polym. Sci. 74 (1999) 2397.
Y. LONG and R. A. SHANKS,ibid. 61 (1996) 1877.
J. KOLARIK and J. JANCAR, Polymer 33 (1992) 4961.
J. BRANDUP, in “Polymer Handbook” (Wiley, New York, 1975).
A.T. JONES, J. M. AIZLEWOOD and D. R. BECKETT, Makromo. Chem. 75 (1964) 134.
J. LU, G.-X. WEI, H.-J. SUE and J. CHU, J. Appl. Polym. Sci. 76 (2000) 311.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Li, Y., Wei, GX. & Sue, HJ. Morphology and toughening mechanisms in clay-modified styrene-butadiene-styrene rubber-toughened polypropylene. Journal of Materials Science 37, 2447–2459 (2002). https://doi.org/10.1023/A:1015471002812
Issue Date:
DOI: https://doi.org/10.1023/A:1015471002812