REFERENCES
J. C. Gutierrez-Rocca and J. W. McGinity, Influence of aging on the physical-mechanical properties of acrylic resin films cast from aqueous dispersions and organic solutions, Drug Dev. Ind. Pharm.,19:315–332 (1993).
S. A. M. Abdel-Aziz and W. Anderson, The influence of casting solvent composition on structure and permeability of acrylic-methacrylic ester copolymer films, J. Pharm. Pharmac.,28:801–805 (1976).
J. H. Guo, R. E. Robertson and G. L. Amidon, Influence of physical aging on mechanical properties of polymer free films: the prediction of long-term aging effects on the water permeability and dissolution rate of polymer film-coated tablets, Pharm. Res.,8:1500–1504 (1991).
C. M. Sinko, A. F. Yee and G. L. Amidon, The effect of physical aging on the dissolution rate of anionic polyelectrolytes, Pharm. Res.,7:648–653 (1990).
C. R. Steuernagel, Latex emulsions for controlled drug delivery, In J. W. McGinity, (ed.), Aqueous Polymeric Coatings For Pharmaceutical Dosage Forms, Marcel Dekker, Inc., New York, 1989.
K. Amighi and A. J. Moes, Factors affecting drug release from sustained-release film-coated pellets using acrylic aqueous dispersions, 6th International Conference on Pharmaceutical Technology, Paris, France, 1992.
P. C. Schmidt and F. Niemann, The MiniWiD-coater. III. effect of application temperature on the dissolution profile of sustained-release theophylline pellets coated with Eudragit RS 30 D, Drug Dev. Ind. Pharm.,19:1603–1612 (1993).
N. Follonier, E. Doelker and E. T. Cole, Evaluation of hot-melt extrusion as a new technique for the production of polymer-based pellets for sustained release capsules containing high loadings of freely soluble drugs, Drug. Dev. Ind. Pharm,20:1323–1339 (1994).
M. R. Jenquin, S. M. Liebowitz, R. E. Sarabia and J. W. McGinity, Physical and chemical factors influencing the release of drugs from acrylic resin films, J. Pharm. Sci.,79:811–816 (1990).
K. Lehmann, Acrylic lattices from redispersable powders for peroral and transdermal drug formulations, Drug Dev. Ind. Pharm.,12:265–287 (1986).
S. Y. Lin, C. Lee and Y. Lin, The Effect of Plasticizers on Compatibility, Mechanical Properties, and Adhesion Strength of Drug-Free Eudragit E Films, Pharm. Res.,8:1137–1143 (1991).
ASTM Standards, D882-91, Tensile properties of thin plastic sheeting, American National Standard for Testing Materials, Philadelphia, pp. 359–365.
J. V. Smith, Xray Diffraction of Organic Substances, Philidelphia, 1966.
J. H. Hildebrand and R. L. Scott, Solubility of Nonelectrolytes, Reinhold, New York, 1950.
M. T. Vela, M. J. Fernandez-Hervas, M. Fernandez-Arevalo, M. J. Arias and A. M. Rabasco, Evaluation of the initial phase release process from inert matrix systems based on percolation theory, Pharm. Tech. Conference, Strasbourg, France, 1994.
Rights and permissions
About this article
Cite this article
Aitken-Nichol, C., Zhang, F. & McGinity, J.W. Hot Melt Extrusion of Acrylic Films. Pharm Res 13, 804–808 (1996). https://doi.org/10.1023/A:1016076306279
Issue Date:
DOI: https://doi.org/10.1023/A:1016076306279