Abstract
A nonlinear modal analysis approach based on the invariant manifoldmethod proposed earlier by Boivin et al. [10] is applied in this paperto perform the dynamic analysis of a micro switch. The micro switch ismodeled as a clamped-clamped microbeam subjected to a transverseelectrostatic force. Two kinds of nonlinearities are encountered in thenonlinear system: geometric nonlinearity of the microbeam associatedwith large deflection, and nonlinear coupling between two energydomains. Using Galerkin method, the nonlinear partial differentialgoverning equation is decoupled into a set of nonlinear ordinarydifferential equations. Based on the invariant manifold method, theassociated nonlinear modal shapes, and modal motion governing equationsare obtained. The equation of motion restricted to these manifolds,which provide the dynamics of the associated normal modes, are solved bythe approach of nonlinear normal forms. Nonlinearities and the pull-inphenomena are examined. The numerical results are compared with thoseobtained from the finite difference method. The estimate for the pull-involtage of the micro device is also presented.
Similar content being viewed by others
References
Romanowicz, B. F., Methodology for the Modeling and Simulation of Microsystems, Kluwer, Dordrecht, 1998.
Gupta, R. K., 'Pull-in dynamics of electrostatically-actuated beams', in 1996 Solid-State Sensor and Actuator Workshop, Late News Paper, Hilton Head, SC, IEEE, New York, 1996.
Choi, B. and Lovell, E. G., 'Improved analysis of microbeams under mechanical and electrostatic loads', Journal of Micromechanics and Microengineering 7, 1997, 24–29.
Ananthasuresh, G. K., Gupta, R. K., and Senturia, S. D., 'An approach to macromodeling of MEMS for nonlinear dynamic analysis', 1996 ASME International Mechanical Engineering Contress and Exposition, November 17-22, Atlanta, GA, Microelectromechanical Systems (MEMS) DSC-Vol. 59, 1996, ASME, New York, pp. 401–407.
Hung, E. S., Yang, Y.-J., and Senturia, S. D., 'Low-order models for fast dynamical simulation of MEMS microstructures, transducers', in Proceedings of the 1997 International Conference on Solid-State Sensors and Actuators, IEEE, New York, 1997, pp. 1101–1104.
Osterberg, P. M. and Senturia, S. D., 'M-TEST: A test chip for MEMS material property measurement using electrostatically actuated test structures', Journal of Microelectromechanical Systems 6(2), 1997, 107–118.
Rosenberg, R. M., 'On nonlinear vibrations of systems with many degrees of freedom', Advances in Applied Mechanics 9, 1966, 155–242.
Shaw, S. W. and Pierre, C., 'Normal modes for nonlinear vibratory systems', Journal of Sound and Vibration 164, 1993, 85–124.
Shaw, S. W. and Pierre, C., 'Normal modes of vibration for nonlinear continuous systems', Journal of Sound and Vibration 169, 1994, 319–347.
Boivin, N., Pierre, C., and Shaw, S. W., 'Nonlinear normal modes, invariance, and modal dynamics approximations of nonlinear systems', Nonlinear Dynamics 8, 1995, 315–346.
Nayfeh, A. H., Introduction to Perturbation Techniques, Wiley, New York, 1981.
Woinowsky-Krieger, S., 'The effects of axial force on the vibration of hinged bars', Journal of Applied Mechanics 17, 1950.
Nayfeh, A. H. and Nayfeh, S. A., 'On nonlinear modes of continuous systems', Transactions of ASME, Journal of Vibration and Acoustics 116, 1984, 129–136.
Shi, F., Ramesh, P., and Mukherjee, S., 'Dynamic analysis of micro-electro-mechanical systems (MEMS)', International Journal for Numerical Methods in Engineering 39, 1996, 4119–4139.
Senturia, S. D., Alum, N., and White, J., 'Simulating the behavior of MEMS devices: Computational methods and needs', IEEE Computational Science & Engineering 4(1), 1997.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Xie, W.C., Lee, H.P. & Lim, S.P. Nonlinear Dynamic Analysis of MEMS Switches by Nonlinear Modal Analysis. Nonlinear Dynamics 31, 243–256 (2003). https://doi.org/10.1023/A:1022914020076
Issue Date:
DOI: https://doi.org/10.1023/A:1022914020076