Abstract
An edge crack in a strip of a functionally graded material (FGM) is studied under transient thermal loading conditions. The FGM is assumed having constant Young's modulus and Poisson's ratio, but the thermal properties of the material vary along the thickness direction of the strip. Thus the material is elastically homogeneous but thermally nonhomogeneous. This kind of FGMs include some ceramic/ceramic FGMs such as TiC/SiC, MoSi2/Al2O3 and MoSi2/SiC, and also some ceramic/metal FGMs such as zirconia/nickel and zirconia/steel. A multi-layered material model is used to solve the temperature field. By using the Laplace transform and an asymptotic analysis, an analytical first order temperature solution for short times is obtained. Thermal stress intensity factors (TSIFs) are calculated for a TiC/SiC FGM with various volume fraction profiles of the constituent materials. It is found that the TSIF could be reduced if the thermally shocked cracked edge of the FGM strip is pure TiC, whereas the TSIF is increased if the thermally shocked edge is pure SiC.
Similar content being viewed by others
References
Aboudi, J., Pindera, M.J. and Arnold, S.M. (1997). Microstructural optimization of functionally graded composites subjected to a thermal gradient via the coupled higher-order theory. Composites Part B – Engineering 28, 93–108.
Bao, G. and Wang, L. (1995). Multiple cracking in functionally graded ceramic/metal coatings. International Journal of Solids and Structures 32, 2853–2871.
Bellman, R., Kalaba, R.E. and Lockett, J.A. (1966). Numerical Inversion of Laplace Transform. American Elsevier Publishing Company, INC., New York.
Cai, H. and Bao, G. (1998). Crack bridging in functionally graded coatings. International Journal of Solids and Structures 35, 701–717.
Carpenter, R.D., Liang, W.W., Paulino, G.H., Gibeling, J.C. and Munir, Z.A. (1999). Fracture testing and analysis of a layered functionally graded Ti/TiB beam in 3-point bending. Materials Science Forum 308–311 (edited by W.A. Kaysser), Trans Tech Publications, Switzerland, 837–842.
Carslaw, H.S. and Jaeger, J.C. (1959). Conduction of Heat in Solids, Clarendon Press, Oxford.
Choi, H.J., Jin, T.E. and Lee, K.Y. (1998). Collinear cracks in a layered half-plane with a graded nonhomogeneous interfacial zone – Part II: Thermal shock response. International Journal of Fracture 94, 123–135.
Christensen, R.M. (1979). Mechanics of Composite Materials. John Wiley & Sons, New York.
Delale, F. and Erdogan, F. (1983). The crack problem for a nonhomogeneous plane. ASME Journal of Applied Mechanics 50, 609–614.
Drake, J.T., Williamson, R.L. and Rabin, B.H. (1993). Finite element analysis of thermal residual stresses at graded ceramic-metal interfaces, Part II: interface optimization for residual stress reduction. Journal of Applied Physics 74, 1321–1326.
Dvorak, G.J. and Srinivas, M.V. (1999). New estimates of overall properties of heterogeneous solids. Journal of the Mechanics and Physics of Solids 47, 899–920.
Erdogan, F. (1995). Fracture mechanics of functionally graded materials. Composites Engineering 5, 753–770.
Erdogan, F. and Wu, B.H. (1996). Crack problems in FGM layers under thermal stresses. Journal of Thermal Stresses 19, 237–265.
Erdogan, F. and Wu, B.H. (1997). The surface crack problem for a plate with functionally graded properties. ASME Journal of Applied Mechanics 64, 449–456.
Georgiadis, H.G., Barber, J.R. and Benammar, F. (1991). An asymptotic solution for short-time transient heatconduction between 2 dissimilar bodies in contact. Quarterly Journal of Mechanics and Applied Mathematics 44, 303–322.
Giannakopoulos, A.E., Suresh, S., Finot, M. and Olsson, M. (1995). Elastoplastic analysis of thermal cycling: layered materials with compositional gradient. Acta Metallurgica Materialia 43, 1335–1354.
Gray, L.J. and Paulino, G.H. (1997). Symmetric Galerkin boundary integral formulation for interface and multizone problems. International Journal for Numerical Methods in Engineering 40, 3085–3101.
Gu, P. and Asaro, R.J. (1997a). Cracks in functionally graded materials. International Journal of Solids and Structures 34, 1–17.
Gu, P. and Asaro, R.J. (1997b). Crack deflection in functionally graded materials. International Journal of Solids and Structures 34, 3085–3098.
Gupta, G.D. and Erdogan, F. (1974). The problem of edge cracks in an infinite strip. ASME Journal of Applied Mechanics 41, 1001–1006.
Hashin, Z. and Shtrikman, S. (1962). A variational approach to the theory of the effective magnetic permeability of multiphase materials. Journal of Applied Physics 33, 3125.
Hasselman, D.P.H. and Youngblood, G.E. (1978). Enhanced thermal stress resistance of structural ceramics with thermal conductivity gradient. Journal of the American Ceramic Society 61, 49–52.
Hirai, T. (1996). Functionally gradient materials. Materials Science and Technology, 17B: Processing of Ceramics, Part 2 (edited by R.J. Brook), VCH Verlagsgesellschaft mbH, Weinheim, Germany, 292–341.
Honein, T. and Herrmann, G. (1997). Conservation laws in nonhomogeneous plane elastostatics. Journal of the Mechanics and Physics of Solids 45, 789–805.
Jin, Z.-H. and Batra, R.C. (1996a). Some basic fracture mechanics concepts in functionally graded materials. Journal of the Mechanics and Physics of Solids 44, 1221–1235.
Jin, Z.-H. and Batra, R.C. (1996b). Stress intensity relaxation at the tip of an edge crack in a functionally graded material subjected to a thermal shock. Journal of Thermal Stresses 19, 317–339.
Jin, Z.-H. and Batra, R.C. (1998). R-curve and strength behavior of a functionally graded material. Materials Science and Engineering A242, 70–76.
Jin, Z.-H. and Noda, N. (1994a). Crack tip singular fields in nonhomogeneous materials. ASME Journal of Applied Mechanics 61, 738–740.
Jin, Z.-H. and Noda, N. (1994b). Transient thermal stress intensity factors for a crack in a semi-infinite plane of a functionally gradient material. International Journal of Solids and Structures 31, 203–218.
Joachim-Ajao, D. and Barber, J. R. (1998). Effect of material properties in certain thermoelastic contact problems. ASME Journal of Applied Mechanics 65, 889–893.
Kawasaki, A. and Watanabe, R. (1987). Finite element analysis of thermal stress of the metals/ceramics multi-layer composites with controlled compositional gradients. Journal of Japan Institute of Metals 51, 525–529.
Kawasaki, A. and Watanabe, R. (1993). Fabrication of disk-shaped functionally gradient materials by hot pressing and their thermomechanical performance. Ceramic Transactions, Vol. 34, Functionally Gradient Materials (edited by J.B. Holt, M. Koisumi, T. Hirai and Z.A. Munir), American Ceramic Society, Westerville, Ohio, 157–164.
Koizumi, M. (1993). The concept of FGM. Ceramic Transactions, Vol. 34, Functionally GradientMaterials (edited by J.B. Holt, M. Koisumi, T. Hirai and Z.A. Munir), American Ceramic Society, Westerville, Ohio, 3–10.
Kokini, K. and Case, M. (1997). Initiation of surface and interface edge cracks in functionally graded ceramic thermal barrier coatings. ASME Journal of Engineering Materials and Technology 119, 148–152.
Kokini, K. and Choules, B.D. (1995). Surface thermal fracture of functionally graded ceramic coatings: effect of architecture and materials. Composites Engineering 5, 865–877.
Kuroda, Y., Kusaka, K., Moro, A. and Togawa, M. (1993). Evaluation tests of ZrO2/Ni functionally gradient materials for regeneratively cooled thrust engine applications. Ceramic Transactions, Vol. 34, Functionally Gradient Materials (edited by J.B. Holt, M. Koisumi, T. Hirai and Z.A. Munir), American Ceramic Society, Westerville, Ohio, 289–296.
Levin, V.M. (1968). On the coefficients of thermal expansion of heterogeneous material. Mekh. Tverd. Tela 88 (in Russian).
Lu, T.J. and Fleck, N.A. (1998). The thermal shock resistance of solids. Acta Materialia 46, 4755–4768.
Miyamoto, Y. (1997). Application of FGMs in Japan. Ceramic Transactions, 76: Functionally Graded Materials (edited by A. Ghosh, Y. Miyamoto, I. Reimanis and J.J. Lannutti), American Ceramic Society, Westerville, Ohio, 171–189.
Miyamoto, Y., Kang, Y., Tanihara, K., Lin, J., Niino, M., Hirai, S. and Umakoshi, T. (1997). Application of Graded MoSi2/Al2O3/Ni/Al2O3/ MoSi2 to high temperature electrode of SiGe thermoelectric device. Ceramic Transactions, Vol. 76, Functionally Graded Materials (edited by A. Ghosh, Y. Miyamoto, I. Reimanisand J.J. Lannutti), American Ceramic Society, Westerville, Ohio, 135–148.
Moriya, S., Kuroda, Y., Sato, M., Tadano, M., Moro, A. and Niino, M. (1999). Research on the application of PSZ/Ni FGM thermal barrier coating to the combustion chamber (damage conditions of TBC and its mechanism). Materials Science Forum 308–311, (edited by W.A. Kaysser), Trans Tech Publications, Switzerland, 410–415.
Munz, D. and Fett, T. (1999). Ceramics, Springer-Verlag, Berlin.
Noda, N. (1997). Thermal stress intensity factor for functionally gradient plate with an edge crack. Journal of Thermal Stresses 20, 373–387.
Noda, N. and Jin, Z.-H. (1993). Thermal stress intensity factors for a crack in a strip of a functionally gradient material. International Journal of Solids and Structures 30, 1039–1056.
Ozisik, M.N. (1980). Heat Conduction, John Wiley & Sons, New York.
Paulino, G.H., Fannjiang, A.C. and Chan, Y.S. (1999). Gradient elasticity theory for a Mode III crack in a functionally graded material. Materials Science Forum 308–311, (edited by W.A. Kaysser), Trans Tech Publications, Switzerland, 971–976.
Reddy, J.N. and Chin, C.D. (1998). Thermomechanical analysis of functionally graded cylinders and plates. Journal of Thermal Stresses 21, 593–626.
Reiter, T. and Dvorak, G.J. (1998). Micromechanical models for graded composite materials: II. thermomechanical loading. Journal of the Mechanics and Physics of Solids 46, 1655–1673.
Reiter, T., Dvorak, G.J. and Tvergaard, V. (1997). Micromechanical models for graded composite materials. Journal of the Mechanics and Physics of Solids 45, 1281–1302.
Sand, Ch., Adler J. and Lenk, R. (1999). A new concept for manufacturing sintered materials with a three dimensional composition gradient using a silicon carbide-titanium carbide composite. Materials Science Forum 308–311, (edited by W.A. Kaysser), Trans Tech Publications, Switzerland, 65–70.
Schovanec, L. and Walton, J.R. (1988). On the order of stress singularity for an antiplane shear crack at the interface of two bonded inhomogeneous elastic materials. ASME Journal of Applied Mechanics 55, 234–236.
Suresh, S. and Mortensen, A. (1998). Fundamentals of Functionally Graded Materials. The Institute of Materials, London.
Takahashi, H., Ishikawa, T., Okugawa, D. and Hashida, T. (1993). Laser and plasma-ARC thermal shock/fatigue fracture evaluation procedure for functionally gradient materials. Thermal Shock and Thermal Fatigue Behavior of Advanced Ceramics (edited by G.A. Schneider and G. Petzow), Kluwer Academic Publishers, Dordrecht, 543–554.
Tanigawa, Y., Akai, T., Kawamura, R. and Oka, N. (1996). Transient heat conduction and thermal stress problems of a nonhomogeneous plate with temperature-dependent material prperties. Journal of Thermal Stresses 19, 77–102.
Tanihara, K., Miyanoto, Y., Matsushita, K., Ma, X., Kawasaki, A., Watanabe, R. and Hirano, K. (1993). Fabrication of Cr3C2/Ni functionally gradient materials by gas-pressure combustion sintering. Ceramic Transactions, Vol. 34, Functionally GradientMaterials (edited by J.B. Holt, M. Koisumi, T. Hirai and Z.A. Munir), American Ceramic Society, Westerville, Ohio, 361–369.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Jin, ZH., Paulino, G.H. Transient thermal stress analysis of an edge crack in a functionally graded material. International Journal of Fracture 107, 73–98 (2001). https://doi.org/10.1023/A:1026583903046
Issue Date:
DOI: https://doi.org/10.1023/A:1026583903046