Abstract
The expedience in the use of hafnium for control elements of a nuclear reactor is considered. The requirements of various producers on the chemical composition and mechanical properties of nuclear-purity hafnium are presented. Results of studies of the strain resistance and ductility characteristics of hafnium are discussed depending on the temperature and the deformation rate. The dependence of the hafnium hardness on the degree of deformation and on the annealing mode is presented. Results of a texture analysis are used to judge the effect of deformation and heat treatment on the anisotropy in the properties of hafnium. The developed process is used for the production of hafnium parts at VNIINM, i.e. hafnium plates are fabricated for the attachment unit of automatic control assemblies (ACA) for VVÉR-440 reactors.
Similar content being viewed by others
REFERENCES
D. E. Thomas and E. T. Hase (eds.), Hafnium Metallurgy [Russian translation], Metallurgiya, Moscow (1967).
Mineral Facts and Problems. Zirconium and Hafnium (1985).
A. E. Tsepyuk and G. V. Tsygankova, Production and Consumption of Rare Metals in the USA [in Russian], Moscow (1983).
L. G. Nekhamkin, Yu. A. Tsylov, and M. N. Butova, State of the Art and Tendencies of the Development of Production and Use of Hafnium Products, Issue 1 [in Russian], Central Research Inst. for Economy and Information of Nonferrous Metallurgy, Moscow (1987).
B. I. Kogan, Rare Metals. State of the Art and Perspectives [in Russian], Nauka, Moscow (1979).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Shikov, A.K., Bocharov, O.V., Arzhakova, V.M. et al. Use of Hafnium in Control Elements of Nuclear Reactors and Power Units. Metal Science and Heat Treatment 45, 300–303 (2003). https://doi.org/10.1023/A:1027392604745
Issue Date:
DOI: https://doi.org/10.1023/A:1027392604745