Abstract
Polymeric precursors to zirconium and hafnium diboride are described. Initial studies concentrated on carbothermal/borothermal reduction of metal alkoxides; however, improved results were obtained from oxide free-precursors prepared from the metal borohydride and borazine. The metal borides are obtained in good chemical and ceramic yield upon pyrolysis, and the polymeric precursors obtained through the reaction of borazine with the metal borohydride exhibit viscosities amenable to use as preceramic binders in powder processing.
Similar content being viewed by others
References
R. W. NEWMAN, Johns Hopkins APL Techn. Dig. 14 (1993) 24 and references therein.
E. L. COURTRIGHT, S. BASKARAN, D. A. NELSON and H. C. REID, “Materials for Advanced Rocket Propulsion—An Assessment of Materials & Process Development Needs,” WL-TR-96-4086 (Dec. 1996).
M. M. OPEKA et al., elsewhere in this publication.
(a) E. L. COURTRIGHT, J. T. PRATER, G. R. HOLCUMB, G. R. ST. PIERRE and R. A. RAPP, Oxidation of Metals 36 (1991) 423; (b) C. B. BARGERON, R. C. BENSON, R. W. NEWMAN, A. N. JETTE and T. E. PHILLIPS, Johns Hopkins APL Techn. Dig. 14 (1993) 29.
(a) M. M. OPEKA, in Proceedings of the 21st Annual Conference on Ceramic, Metal, and Carbon Composites, Materials and Structures (Cocoa Beach, Florida, 1997) p. 395; (b) M. M. OPEKA, in Proceedings of the 21st Annual Conference on Ceramic, Metal, and Carbon Composites, Materials and Structures (Cocoa Beach, Florida, 1997) p. 425; (c) E. J. WUCHINA and M. M. OPEKA, in Proceedings of the 21st Annual Conference on Ceramic, Metal, and Carbon Composites, Materials and Structures (Cocoa Beach, Florida, 1997) p. 437.
M. M. OPEKA, in Proceedings of the 22nd Annual Conference on Composites, Materials and Structures (Cocoa Beach, Florida, 1998), paper CB000∼118.pdf; (b) A. R. CANFIELD, and L. M. SMART, in Proceedings of the 22nd Annual Conference on Composites, Materials and Structures (Cocoa Beach, Florida, 1998) paper CB000∼39.pdf; (c) R. DIRLING, in Proceedings of the 22nd Annual Conference on Composites, Materials and Structures (Cocoa Beach, Florida, 1998), paper CB000~67.pdf, and related papers in the same volume.
M. J. WHITE, L. KAUFMAN and J. BULL, in Proceedings of the 21st Annual Conference on Ceramic, Metal, and Carbon Composites, Materials and Structures (Cocoa Beach, Florida, 1997) p. 455.
M. M. OPEKA, I. G. TALMY, E. J. WUCHINA, J. A. ZAYKOSKI and S. J. CAUSEY, J. Eur. Cer. Soc. 19 (1999) 2405.
O. KNOTECK and A. SCHREY, “Hard and Protective Materials,” in Handbook of Thin Film Process Technology, edited by S. Glocker and I. Shah (Institute of Physics Publishing, Philadelphia, PA, 1995) p. Z1.0:12.
“The Manipulation of Air-Sensitive Compounds,” 2nd ed., edited by D. F. Shriver and M. A. Drezdzon (John Wiley & Sons, New York, 1986).
J. GREEN et al., Polym. Lett. 2 (1964) 987.
SNEDDON et al., Inorg. Syn. 32 (1998) 232.
(a) K. SU and L. G. SNEDDON, Chem. Mater. 3 (1991) 10; (b) K. SU and L. G. SNEDDON, Chem. Mater. 5 (1993) 1659.
J. A. JENSEN, J. Amer. Chem. Soc. 110 (1988) 1643.
A. L. WAYDA, Appl. Phys. Lett. 53 (1988) 687.
F. N. TEBBE and R. T. BAKER, U. S. PATENT 5,364,607 (15 Nov. 1994).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Schwab, S.T., Stewart, C.A., Dudeck, K.W. et al. Polymeric precursors to refractory metal borides. Journal of Materials Science 39, 6051–6055 (2004). https://doi.org/10.1023/B:JMSC.0000041701.01103.41
Issue Date:
DOI: https://doi.org/10.1023/B:JMSC.0000041701.01103.41