Abstract
In recent years, great strides have been made in the formulation of solid lubricant coatings for a wide range of industrial applications. These coatings are now available in nano-structured and/or -composite forms to provide better performance and durability even under very severe sliding conditions. By coupling these coatings with smart surface engineering strategies (such as micro-texturing and/or -patterning), researchers have achieved higher levels of performance and durability in demanding tribological applications. Some of these advanced coatings are now commercially available and can meet the ever-increasing performance and durability requirements of severe tribological applications. This paper will provide a historical overview of recent developments in solid lubricant coatings and will expand on the lubrication mechanisms of both traditional and new solid lubricants. Special emphasis will be placed on modern practices that are aimed at enhancing the properties of these coatings and expanding their uses in practical applications.
Similar content being viewed by others
References
A. Erdemir, in: Modern Tribology Handbook, Vol. II, ed. B. Bhushan (CRC Press, Boca Raton, FL, 2001)p. 787.
K. Holmberg and A. Matthews, in: Coatings Tribology, ed. D. Dowson, (Elsevier, Netherlands, 1994) p. 1.
C. Donnet, Condensed Matter News, 4(6) (1995) 9.
P.Sutor, MRS Bull. 16 (1991) 24.
K. Miyoshi, (1991) NASA Technical Memorandum No: 1072249.
I.L. Singer, MRS Bull. 23(6) (1998) 37.
A. Erdemir, Tribol. Lett. 8 (2000) 97.
A. Erdemir and C. Donnet, in: Modern Tribology Handbook, ed. B. Bhushan Vol. II, (CRC Press, Boca Raton, FL, 2001) p. 871.
I.L. Singer, in: Fundamentals of Friction:Macroscopic and Microscopic Processes, NATO-ASI Series, Vol. 220, eds. I.L. Singer, H.M. Pollock (Kluwer Academic, Dordrecht, 1992) p. 237.
J.M. Martin, C. Donnet, T. Le Mogne and T. Epicier, Phys. Rev. B 48(14) (1993) 10583.
C. Donnet, J.M. Martin, T. Le Mogne and M. Belin, Tribol. Int. 29(2) (1996) 123.
T.J. Robertson, Mater. Sci. Eng. R 37(4-6) (2002) 129.
R. Hauert and U. Müller, Diam. Relat. Mater. 12 (2003) 171.
A. Erdemir, C. Bindal, G.R. Fenske, C. Zuiker, A.R. Krauss and D.M. Gruen, Diam. Relat. Mater, 5 (1996) 923.
K. Miyoshi, R.L.C. Wu, A. Garscadden, P.N. Barnes and H.E. Jackson, J. Appl. Phys. 74 (1993) 4446.
W.E. Jamison, in: CRC Handbook of Tribology and Lubrication, Vol. 3, (CRC Press, Boca Raton, FL, 1994) 121.p.
T.A. Blanchet and F.E. Kennedy, Wear 153 (1992) 229.
A. Wang, D.C. Sun, C. Stark and J.H. Dumbleton, Wear 181/ 183 (1995) 241.
P.J. John and J.S. Zabinski, Tribol. Lett. 7 (1999) 31.
A. Matthews, Vacuum 65 (2002) 237.
M. Bin-Sudin, A. Leyland, A.S. James, A. Matthews, J. Hous-den and B. Garside, Surf. Coat. Technol. 81 (1996) 215.
A.L. Yerokhin, X. Nie, A. Leyland, A. Matthews, and S.J. Do-wey, Surf. Coat. Technol. 122 (1999) 73.
A. Matthews, in: Protective Coatings and Thin Films, eds. Y. Pauleau and P.B. Berna (Kluwer Academic, Dordrecht, 1997) p. 1.
T. Bell, in: New Directions in Tribology, ed. I.M. Hutching (Mechanical Engineering Publications, London, 1997), p. 121.
O. Knotek, M. Atzor, and H.G. Prengel, Surf. Coat. Technol. 36 (1988) 265.
H.A. Jehn, Surf. Coat. Technol. 131 (2000) 433.
R. Cremer, in: Value-Addition Metallurgy, eds. W.D. Cho and H.Y. Sohn (TMS, 1998) 249.
A. Cavaleiro and C. Louro, Vacuum, 64 (3-4) (2002) p. 211.
M.Balzer and H.Kappl, Surf.Coat.Technol. 116-119 (1999) 766.
B. Rother and H. Kappl, Surf. Coat. Technol. 73 (1995) 14.
J.C. Rebholtz, H. Ziegele, A. Leyland and A. Matthews, J. Vac. Sci. Technol. A16 (1998) 2851.
S. PalDey and S.C. Deevi, Mater. Sci. Eng. A 342 (2003) 58.
K. Holmberg and A. Matthews, in: Modern Tribology Handbook, Vol. II, ed. B. Bhushan (CRC Press 2001) p. 827.
A. Savan, E. Pfluger, R. Goller and W. Gissler, Surf. Coat. Technol. 126 (1999) 159.
C. Donnet, J. Fontaine, T. Le Mogne, M. Belin, C. Héau, J.P. Térrat, F. Vaux and G. Pont, Surf. Coat. Technol. 120/121 (1999) 548.
A.A. Voevodin, S.D. Walck and J.S. Zabinski, Wear 203/204 (1997) 516.
S. Veprek, J. Vac. Sci. Technol. A17(5) (1999) 2401.
J.S. Zabinski, J.H. Sanders, J. Nainaparampil and S.V. Prasad, Tribol. Lett. 8 (2000) 103.
S.A. Barnett and M. Shinn, Annu. Rev. Mater. Sci. 24 (1994) 481.
J. Patscheider, MRS Bull. 28(3) (2003) 180.
A. Leyland and A. Matthews, Wear, 246 (2000) 1.
J. Musil, P. Zeman, H. Hruby and P. Mayrhofer, Surf. Coat. Technol. 115 (1999) 32.
S.A. Barnett, A. Madan, I. Kim and K. Martin, MRS Bull. 28(3) (2003) 169.
A.A. Voevodin, J.P. O'Neull and J.S. Zabinski, Surf. Coat. Technol. 116-119 (1999) 36.
A.A. Voevodin and J.S. Zabinski, Thin Solid Films 370 (2000) 223.
P.J. John, S.V. Prasad, A.A. Voevodin and J.S. Zabinski, Wear, 219(2) (1998) 155.
S.D. Walck, M.S. Donley, J.S. Zabinski and V.J. Dyhouse, J. Mater. Res. 9 (1994) 236.
S.D. Walck, J.S. Zabinski, N.T. McDevitt and J.E. Bultman, Thin Solid Films 305 (1997) 130.
E.C. Cutiongco, D. Li, Y.W. Chung and C.S. Bhatia, J. Tribol. 118 (1996) 543.
A.D. Khurshudov and K. Kato, Surf. Coat. Technol. 86/87 (1996) 664.
L. Hultman, J. Neidhardt, N. Hellgren, H. Sjöström and J.E. Sundgren, MRS Bull. 28(3) (2003) 194.
W.D. Münz, MRS Bull. 28(3) (2003) 173.
U. Pettersson and S. Jacobson, Tribol. Int. 36 (2003) 857.
V.P. Agreev, T.N. Glushko, V.F. Dorfman, A.V. Kuzmichev, and B.N. Pypkin, SPIE Proceedings, 1503 (1991)p. 453.
R. Le Harzic, N. Huot, E. Audouard, C. Jonin, P. Laporte, S. Valette, A. Fraczkiewicz and R. Fortunier, Appl. Phys. Lett. 80(21) (2002) 3886.
T.M. Kononenko, S.V. Garnov, S.M. Pimenov, V.I. Konov, V. Romano and B. Borsos, Appl. Phys. A71 (2000) 627.
G. Dumitru, V. Romano, H.P. Weber, H. Haefke and Y. Ger-big, Proceedings WLT Laser 2001, (2001) 351.
G. Dumitru, V. Romano, H.P. Weber, S.M. Pimenov, T.M. Kononenko, J. Hermann, S. Bruneau, Y. Gerbig and M. Shupe-gin, Diam. Relat. Mater. 12 (2003) 1034.
A.A. Voevodin, J.Bultman and J.S. Zabinski, Surf. Coat. Tech-nol. 107 (1998) 12.
Rights and permissions
About this article
Cite this article
Donnet, C., Erdemir, A. Solid Lubricant Coatings: Recent Developments and Future Trends. Tribology Letters 17, 389–397 (2004). https://doi.org/10.1023/B:TRIL.0000044487.32514.1d
Issue Date:
DOI: https://doi.org/10.1023/B:TRIL.0000044487.32514.1d