Skip to main content

Thank you for visiting nature.com. You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.

  • Letter
  • Published:

Conductive MOF electrodes for stable supercapacitors with high areal capacitance

Abstract

Owing to their high power density and superior cyclability relative to batteries, electrochemical double layer capacitors (EDLCs) have emerged as an important electrical energy storage technology that will play a critical role in the large-scale deployment of intermittent renewable energy sources, smart power grids, and electrical vehicles1,2,3. Because the capacitance and charge–discharge rates of EDLCs scale with surface area and electrical conductivity, respectively, porous carbons such as activated carbon, carbon nanotubes and crosslinked or holey graphenes are used exclusively as the active electrode materials in EDLCs4,5,6,7,8,9. One class of materials whose surface area far exceeds that of activated carbons, potentially allowing them to challenge the dominance of carbon electrodes in EDLCs, is metal–organic frameworks (MOFs)10. The high porosity of MOFs, however, is conventionally coupled to very poor electrical conductivity, which has thus far prevented the use of these materials as active electrodes in EDLCs. Here, we show that Ni3(2,3,6,7,10,11-hexaiminotriphenylene)2 (Ni3(HITP)2), a MOF with high electrical conductivity11, can serve as the sole electrode material in an EDLC. This is the first example of a supercapacitor made entirely from neat MOFs as active materials, without conductive additives or other binders. The MOF-based device shows an areal capacitance that exceeds those of most carbon-based materials and capacity retention greater than 90% over 10,000 cycles, in line with commercial devices. Given the established structural and compositional tunability of MOFs, these results herald the advent of a new generation of supercapacitors whose active electrode materials can be tuned rationally, at the molecular level.

This is a preview of subscription content, access via your institution

Access options

Buy this article

Prices may be subject to local taxes which are calculated during checkout

Figure 1: Structural schematics of Ni3(HITP)2.
Figure 2: Cyclic voltammetry of Ni3(HITP)2 powder in a three-electrode cell.
Figure 3: Performance of Ni3(HITP)2 electrodes in a symmetrical supercapacitor cell up to 1 V.
Figure 4: Comparison of areal capacitances among various EDLC materials.
Figure 5: Capacitance loss in a symmetric Ni3(HITP)2 supercapacitor cell before and after deep cycling at 1.5 V.

Similar content being viewed by others

References

  1. Larcher, D. & Tarascon, J. M. Towards greener and more sustainable batteries for electrical energy storage. Nat. Chem. 7, 19–29 (2014).

    Article  Google Scholar 

  2. Béguin, F. & Frackowiak, E. Supercapacitors: Materials, Systems, and Applications (Wiley-VCH, 2013).

    Book  Google Scholar 

  3. Conway, B. E. Electrochemical Supercapacitors: Scientific Fundamentals and Technological Applications (Plenum Press, 1999).

    Book  Google Scholar 

  4. Simon, P. & Gogotsi, Y. Materials for electrochemical capacitors. Nat. Mater. 7, 845–854 (2008).

    Article  CAS  Google Scholar 

  5. Béguin, F., Presser, V., Balducci, A. & Frackowiak, E. Carbons and electrolytes for advanced supercapacitors. Adv. Mater. 26, 2219–2251 (2014).

    Article  Google Scholar 

  6. Gu, W. & Yushin, G. Review of nanostructured carbon materials for electrochemical capacitor applications: advantages and limitations of activated carbon, carbide-derived carbon, zeolite-templated carbon, carbon aerogels, carbon nanotubes, onion-like carbon, and graphene. Wiley Interdiscip. Rev. Energy Environ. 3, 424–473 (2014).

    Article  CAS  Google Scholar 

  7. Sevilla, M. & Mokaya, R. Energy storage applications of activated carbons: supercapacitors and hydrogen storage. Energy Environ. Sci. 7, 1250–1280 (2014).

    Article  CAS  Google Scholar 

  8. Xu, Y. et al. Holey graphene frameworks for highly efficient capacitive energy storage. Nat. Commun. 5, 4554 (2014).

    Article  CAS  Google Scholar 

  9. Zhu, Y. et al. Carbon-based supercapacitors produced by activation of graphene. Science 332, 1537–1541 (2011).

    Article  CAS  Google Scholar 

  10. Furukawa, H., Cordova, K. E., O’Keeffe, M. & Yaghi, O. M. The chemistry and applications of metal-organic frameworks. Science 341, 1230444 (2013).

    Article  Google Scholar 

  11. Sheberla, D. et al. High electrical conductivity in Ni3(2,3,6,7,10,11-hexaiminotriphenylene)2, a semiconducting metal–organic graphene analogue. J. Am. Chem. Soc. 136, 8859–8862 (2014).

    Article  CAS  Google Scholar 

  12. Simon, P., Gogotsi, Y. & Dunn, B. Where do batteries end and supercapacitors begin? Science 343, 1210–1211 (2014).

    Article  CAS  Google Scholar 

  13. Farha, O. K. et al. Metal–organic framework materials with ultrahigh surface areas: is the sky the limit? J. Am. Chem. Soc. 134, 15016–15021 (2012).

    Article  CAS  Google Scholar 

  14. Salunkhe, R. R. et al. Asymmetric supercapacitors using 3D nanoporous carbon and cobalt oxide electrodes synthesized from a single metal–organic framework. ACS Nano 9, 6288–6296 (2015).

    Article  CAS  Google Scholar 

  15. Wang, L. et al. Metal–organic frameworks for energy storage: batteries and supercapacitors. Coord. Chem. Rev. 307, 361–381 (2016).

    Article  CAS  Google Scholar 

  16. Choi, K. M. et al. Supercapacitors of nanocrystalline metal–organic frameworks. ACS Nano 8, 7451–7457 (2014).

    Article  CAS  Google Scholar 

  17. Buerschaper, R. A. Thermal and electrical conductivity of graphite and carbon at low temperatures. J. Appl. Phys. 15, 452–454 (1944).

    Article  CAS  Google Scholar 

  18. To, J. W. F. et al. Ultrahigh surface area three-dimensional porous graphitic carbon from conjugated polymeric molecular framework. ACS Cent. Sci. 1, 68–76 (2015).

    Article  CAS  Google Scholar 

  19. Sun, L., Campbell, M. G. & Dincă, M. Electrically conductive porous metal–organic frameworks. Angew. Chem. Int. Ed. 55, 3566–3579 (2016).

    Article  CAS  Google Scholar 

  20. Miner, E. M. et al. Electrochemical oxygen reduction catalysed by Ni3(hexaiminotriphenylene)2 . Nat. Commun. 7, 10942 (2016).

    Article  CAS  Google Scholar 

  21. Pilon, L., Wang, H. & d’Entremont, A. Recent advances in continuum modeling of interfacial and transport phenomena in electric double layer capacitors. J. Electrochem. Soc. 162, A5158–A5178 (2015).

    Article  CAS  Google Scholar 

  22. Herebian, D., Bothe, E., Neese, F., Weyhermüller, T. & Wieghardt, K. Molecular and electronic structures of bis-(o-diiminobenzosemiquinonato)metal(II) complexes (Ni, Pd, Pt), their monocations and -anions, and of dimeric dications containing weak metal −metal bonds. J. Am. Chem. Soc. 125, 9116–9128 (2003).

    Article  CAS  Google Scholar 

  23. Barthram, A. M., Cleary, R. L., Kowallick, R. & Ward, M. D. A new redox-tunable near-IR dye based on a trinuclear ruthenium(II) complex of hexahydroxytriphenylene. Chem. Commun. 34, 2695–2696 (1998).

    Article  Google Scholar 

  24. Pohlmann, S., Ramirez-Castro, C. & Balducci, A. The influence of conductive salt ion selection on EDLC electrolyte characteristics and carbon-electrolyte interaction. J. Electrochem. Soc. 162, A5020–A5030 (2015).

    Article  CAS  Google Scholar 

  25. Gogotsi, Y. & Simon, P. True performance metrics in electrochemical energy storage. Science 334, 917–918 (2011).

    Article  CAS  Google Scholar 

  26. Stoller, M. D. & Ruoff, R. S. Best practice methods for determining an electrode material’s performance for ultracapacitors. Energy Environ. Sci. 3, 1294–1301 (2010).

    Article  CAS  Google Scholar 

  27. Ji, H. et al. Capacitance of carbon-based electrical double-layer capacitors. Nat. Commun. 5, 3317 (2014).

    Article  Google Scholar 

  28. Quintero, R. et al. Carbon nanotube 3D current collectors for lightweight, high performance and low cost supercapacitor electrodes. RSC Adv. 4, 8230–8237 (2014).

    Article  CAS  Google Scholar 

  29. Taberna, P. L., Portet, C. & Simon, P. Electrode surface treatment and electrochemical impedance spectroscopy study on carbon/carbon supercapacitors. Appl. Phys. A 82, 639–646 (2006).

    Article  CAS  Google Scholar 

  30. Chen, L. et al. Noncovalently netted, photoconductive sheets with extremely high carrier mobility and conduction anisotropy from triphenylene-fused metal trigon conjugates. J. Am. Chem. Soc. 131, 7287–7292 (2009).

    Article  CAS  Google Scholar 

Download references

Acknowledgements

This work was supported as part of the Center for Excitonics, an Energy Frontier Research Center funded by the US Department of Energy, Office of Science, Office of Basic Energy Sciences, under award no. DE-SC0001088 (MIT). M.D. gratefully acknowledges early career support from the Sloan Foundation, the Research Corporation for Science Advancement (Cottrell Scholar), and 3M. J.C.B., Y.S.-H. and J.S.E. were supported by BMW and the Skoltech Center for Electrochemical Energy Storage. Part of the characterization was performed at the Center for Nanoscale Systems (CNS), a member of the National Nanotechnology Infrastructure Network (NNIN), which is supported by the National Science Foundation under NSF award no. ECS-0335765. CNS is part of Harvard University. Sector 20 facilities at the Advanced Photon Source, and research at these facilities is supported by the US Department of Energy—Basic Energy Sciences, the Canadian Light Source and its funding partners, and the Advanced Photon Source. Use of the Advanced Photon Source, an Office of Science User Facility operated for the US Department of Energy (DOE) Office of Science by Argonne National Laboratory, was supported by the US DOE under Contract No. DE-AC02-06CH11357.

Author information

Authors and Affiliations

Authors

Contributions

All authors devised experiments; D.S. performed all electrochemical experiments; J.C.B. and J.S.E. assembled full cells; D.S., M.D. and Y.S.-H. interpreted electrochemical data; C.-J.S. and J.S.E. collected and interpreted XAS data; D.S. and M.D. wrote the paper.

Corresponding author

Correspondence to Mircea Dincă.

Ethics declarations

Competing interests

The authors declare no competing financial interests.

Supplementary information

Supplementary Information

Supplementary Information (PDF 10324 kb)

Supplementary Information

Supplementary movie 1 (MP4 4018 kb)

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Sheberla, D., Bachman, J., Elias, J. et al. Conductive MOF electrodes for stable supercapacitors with high areal capacitance. Nature Mater 16, 220–224 (2017). https://doi.org/10.1038/nmat4766

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1038/nmat4766

This article is cited by

Search

Quick links

Nature Briefing

Sign up for the Nature Briefing newsletter — what matters in science, free to your inbox daily.

Get the most important science stories of the day, free in your inbox. Sign up for Nature Briefing