Abstract
Assemblies of metal oxide nanowires in 3D stacks can enable the realization of nanodevices with tailored conductivity, porous structure and a high surface area. Current fabrication methods require complicated multistep procedures that involve the initial preparation of nanowires followed by manual assembly or transfer printing, and thus lack synthesis flexibility and controllability. Here we report a general synthetic orthogonal assembly approach to controllably construct 3D multilayer-crossed metal oxide nanowire arrays. Taking tungsten oxide semiconducting nanowires as an example, we show the spontaneous orthogonal packing of composite nanorods of poly(ethylene oxide)-block-polystyrene and silicotungstic acid; the following calcination gives rise to 3D cross-stacked nanowire arrays of Si-doped metastable ε-phase WO3. This nanowire stack framework was also tested as a gas detector for the selective sensing of acetone. By using other polyoxometallates, this fabrication method for woodpile-like 3D nanostructures can also be generalized to different doped metal oxide nanowires, which provides a way to manipulate their physical properties for various applications.
This is a preview of subscription content, access via your institution
Access options
Access Nature and 54 other Nature Portfolio journals
Get Nature+, our best-value online-access subscription
$29.99 / 30 days
cancel any time
Subscribe to this journal
Receive 12 print issues and online access
$259.00 per year
only $21.58 per issue
Buy this article
- Purchase on Springer Link
- Instant access to full article PDF
Prices may be subject to local taxes which are calculated during checkout
Similar content being viewed by others
Data availability
The datasets generated and/or analysed during the current study are available from the corresponding author on reasonable request.
References
Mao, L. B. et al. Synthetic nacre by predesigned matrix-directed mineralization. Science 354, 107–110 (2016).
Ma, K. et al. Self-assembly of highly symmetrical, ultrasmall inorganic cages directed by surfactant micelles. Nature 558, 577–580 (2018).
Prochowicz, D., Kornowicz, A. & Lewiński, J. Interactions of native cyclodextrins with metal ions and inorganic nanoparticles: fertile landscape for chemistry and materials science. Chem. Rev. 117, 13461–13501 (2017).
Tan, K. W. et al. Transient laser heating induced hierarchical porous structures from block copolymer-directed self-assembly. Science 349, 54–58 (2015).
Liu, X. G. et al. Complex silica composite nanomaterials templated with DNA origami. Nature 559, 593–598 (2018).
Wang, F. D., Dong, A. G. & Buhro, W. E. Solution–liquid–solid synthesis, properties, and applications of one-dimensional colloidal semiconductor nanorods and nanowires. Chem. Rev. 116, 10888–10933 (2016).
Dasgupta, N. P. et al. Semiconductor nanowires—synthesis, characterization, and applications. Adv. Mater. 26, 2137–2184 (2014).
Yang, P. D. Wires on water. Nature 425, 243–244 (2003).
Smith, P. A., Nordquist, C. D., Jackson, T. N. & Mayer, T. S. Electric-field assisted assembly and alignment of metallic nanowires. Appl. Phys. Lett. 77, 1399–1401 (2000).
Chen, M. & Sun, L. Tuning the response of magnetic suspensions. Appl. Phys. Lett. 82, 3310–3312 (2003).
Huang, Y., Duan, X. F., Wei, Q. Q. & Lieber, C. M. Directed assembly of one-dimensional nanostructures into functional networks. Science 291, 630–633 (2001).
Law, W., Greene, L. E., Johnson, J. C., Saykally, R. & Yang, P. D. Nanowire dye-sensitized solar cells. Nat. Mater. 4, 455–459 (2005).
Hochbaum, A. I. et al. Enhanced thermoelectric performance of rough silicon nanowires. Nature 451, 163–168 (2008).
Kim, H. Monolithic InGaAs nanowire array lasers on silicon-on-insulator operating at room temperature. Nano Lett. 17, 3465–3470 (2017).
Forster, S. & Dipl-Chem, T. P. From self-organizing polymers to nanohybrid and biomaterials. Angew. Chem. Int. Ed. 41, 688–714 (2002).
Yang, J. K. W. et al. Complex self-assembled patterns using sparse commensurate templates with locally varying motifs. Nat. Nanotechnol. 5, 256–260 (2010).
Doerk, G. S. et al. Enabling complex nanoscale pattern customization using directed self-assembly. Nat. Commun. 5, 5805 (2014).
Bates, C. M. et al. Polarity-switching top coats enable orientation of sub-10-nm block copolymer domains. Science 338, 775–779 (2012).
Amir Tavakkoli, K. G. et al. Multilayer block copolymer meshes by orthogonal self-assembly. Nat. Commun. 7, 10518 (2016).
Wei, W. et al. Synthesis of molybdenum disulfide nanowire arrays using a block copolymer template. Chem. Mater. 28, 4017–4023 (2016).
Jeong, J. W. et al. 3D cross-point plasmonic nanoarchitectures containing dense and regular hot spots for surface-enhanced Raman spectroscopy analysis. Adv. Mater. 28, 8695–8704 (2016).
Zhao, D. Y. et al. Triblock copolymer syntheses of mesoporous silica with periodic 50 to 300 ångstrom pores. Science 279, 548–552 (1998).
Lee, J. et al. Direct access to thermally stable and highly crystalline mesoporous transition-metal oxides with uniform pores. Nat. Mater. 7, 222–228 (2008).
Thompson, R. B., Ginzburg, V. V., Matsen, M. W. & Balazs, A. C. Predicting the mesophases of copolymer–nanoparticle composites. Science 292, 2469–2472 (2001).
Zhao, Y. et al. Small-molecule-directed nanoparticle assembly towards stimuli-responsive nanocomposites. Nat. Mater. 8, 979–985 (2009).
Robbins, S. W. et al. Block copolymer self-assembly-directed synthesis of mesoporous gyroidal superconductors. Sci. Adv. 2, 1501119 (2016).
Ferain, I., Colinge, C. A. & Colinge, J. P. Multigate transistors as the future of classical metal–oxide–semiconductor field-effect transistors. Nature 479, 310–316 (2001).
Hochbaum, A. I. & Yang, P. D. Semiconductor nanowires for energy conversion. Chem. Rev. 110, 527–546 (2010).
Hahm, J. & Lieber, C. M. Direct ultrasensitive electrical detection of DNA and DNA sequence variations using nanowire nanosensors. Nano Lett. 4, 51–54 (2004).
Lunkenbein, T. et al. Direct synthesis of inverse hexagonally ordered diblock copolymer/polyoxometalate nanocomposite films. J. Am. Chem. Soc. 134, 12685–12692 (2012).
Lunkenbein, T. et al. Access to ordered porous molybdenum oxycarbide/carbon nanocomposites. Angew. Chem. Int. Ed. 51, 12892–12896 (2012).
Wu, Y. et al. Complexation of polyoxometalates with cyclodextrins. J. Am. Chem. Soc. 137, 4111–4118 (2015).
Liu, S. H. et al. Patterning two-dimensional free-standing surfaces with mesoporous conducting polymers. Nat. Commun. 6, 8817 (2015).
Wang, Z. M., Wang, W. D., Coombs, N., Soheilnia, N. & Ozin, G. A. Graphene oxide–periodic mesoporous silica sandwich nanocomposites with vertically oriented channels. ACS Nano 4, 7437–7450 (2010).
Deng, Y. H. et al. Ordered mesoporous silicas and carbons with large accessible pores templated from amphiphilic diblock copolymer poly(ethylene oxide)-b-polystyrene. J. Am. Chem. Soc. 129, 1690–1697 (2007).
Rydosz, A. et al. Performance of Si-doped WO3 thin films for acetone sensing prepared by glancing angle d.c. magnetron sputtering. IEEE Sens. J. 16, 1004–1012 (2016).
Wang, L., Teleki, A., Pratsinis, S. E. & Gouma, P. I. Ferroelectric WO3 nanoparticles for acetone selective detection. Chem. Mater. 20, 4794–4796 (2008).
Righettoni, M., Tricoli, A. & Pratsinis, S. E. Thermally stable, silica-doped ε-WO3 for sensing of acetone in the human breath. Chem. Mater. 22, 3152–3157 (2010).
Righettoni, M., Tricoli, A. & Pratsinis, S. E. Si:WO3 sensors for highly selective detection of acetone for easy diagnosis of diabetes by breath analysis. Anal. Chem. 82, 3581–3587 (2010).
Li, Y. H. et al. Highly ordered mesoporous tungsten oxides with a large pore size and crystalline framework for H2S sensing. Angew. Chem. Int. Ed. 53, 9035–9040 (2014).
Wang, C. et al. A shear stress regulated assembly route to silica nanotubes and their closely packed hollow mesostructures. Angew. Chem. Int. Ed. 52, 11603–11606 (2013).
Luo, W. et al. A Resol-assisted co-assembly approach to crystalline mesoporous niobia spheres for electrochemical biosensing. Angew. Chem. Int. Ed. 52, 10505–10510 (2013).
Wang, Y. C. et al. Structural distortion and electronic states of Rb doped WO3 by X-ray absorption spectroscopy. RSC Adv. 6, 107871–107877 (2016).
Comini, E., Cristalli, A., Faglia, G. & Sberveglieri, G. Light enhanced gas sensing properties of indium oxide and tin oxide sensors. Sens. Actuators B 65, 260–263 (2000).
Zhang, H., Qin, H. W., Gao, C. Y. & Hu, J. F. An ultrahigh sensitivity acetone sensor enhanced by light illumination. Sensors 18, 2318 (2018).
Li, M. et al. Effect of hydrogen on the integrity of aluminium-oxide interface at elevated temperatures. Nat. Commun. 8, 14564 (2017).
Kresse, G. & Furthmüller, J. Efficiency of ab-initio total energy calculations for metals and semiconductors using a plane-wave basis set. Comput. Mater. Sci. 6, 15–50 (1996).
Kresse, G. & Furthmüller, J. Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set. Phys. Rev. B 54, 11169–11186 (1996).
Blöchl, P. E. Projector augmented-wave method. Phys. Rev. B 50, 17953–17979 (1994).
Kresse, G. & Joubert, D. From ultrasoft pseudopotentials to the projector augmented-wave method. Phys. Rev. B 59, 1758–1775 (1999).
Methfessel, M. & Paxton, A. T. High-precision sampling for Brillouin-zone integration in metals. Phys. Rev. B 40, 3616–3621 (1989).
Perdew, J. P., Burke, K. & Ernzerhof, M. Generalized gradient approximation made simple. Phys. Rev. Lett. 77, 3865–3868 (1996).
Perdew, J. P. & Wang, Y. Accurate and simple analytic representation of the electron-gas correlation energy. Phys. Rev. B 45, 13244–13249 (1992).
Monkhorst, H. J. & Pack, J. D. Special points for Brillouin-zone integrations. Phys. Rev. B 13, 5188–5192 (1976).
Webb, S. M. SIXpack: a graphical user interface for XAS analysis using IFEFFIT. Phys. Scr. T115, 1011–1014 (2005).
Newville, M. J. IFEFFIT: interactive XAFS analysis and FEFF fitting. J. Synchrotron Rad. 8, 324–332 (2001).
Rehr, J. J., Albers, R. C. & Zabinsky, S. I. High-order multiple-scattering calculations of X-ray-absorption fine structure. Phys. Rev. Lett. 69, 3397–3400 (1992).
Acknowledgements
This work was financially supported by the National Natural Science Foundation of China (Grant nos 51422202, 21673048 and 21875044), Key Basic Research Program of Science and Technology Commission of Shanghai Municipality (17JC1400100) and Youth Top-notch Talent Support Program of China. The authors thank G. Zhou and Z. Shan for assistance in TEM characterization.
Author information
Authors and Affiliations
Contributions
Y.R., Y.Z. and Y.D. conceived the project and designed the experiments. Y.R., Y.Z., X.Z., J.M., D.Z., G.W. and Y.D. were primarily responsible for the data collection and analysis. Y.L. and Y.A. analysed the structures with DFT calculations. S.X. and Y.Z. analysed the EXAFS data. Y.R., Y.Z. and Y.D. prepared the figures and wrote the main manuscript text. All the authors contributed to the discussions and manuscript preparation.
Corresponding author
Ethics declarations
Competing interests
The authors declare no competing interests.
Additional information
Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Supplementary information
Supplementary Information
Supplementary Figs. 1–35, Notes 1–7 and Tables 1–6.
Supplementary Video 1
In situ TEM observation was conducted to study the real time structure transformation of the as-casted PEO-b-PS/H4SiW hybrid film into 3D crossed multilayer Si-doped WO3 nanowires by heating the hybrid film under TEM and in situ recording images of the sample.
Supplementary Video 2
The animation about the formation mechanism of 3D crossed multilayer Si-doped WO3 nanowires by the solvent evaporation induced co-assembly of PEO-b-PS copolymers and H4SiW, followed with structure transformation induced by thermal treatment.
Rights and permissions
About this article
Cite this article
Ren, Y., Zou, Y., Liu, Y. et al. Synthesis of orthogonally assembled 3D cross-stacked metal oxide semiconducting nanowires. Nat. Mater. 19, 203–211 (2020). https://doi.org/10.1038/s41563-019-0542-x
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1038/s41563-019-0542-x
This article is cited by
-
Intelligent block copolymer self-assembly towards IoT hardware components
Nature Reviews Electrical Engineering (2024)
-
Polyoxometalate-based plasmonic electron sponge membrane for nanofluidic osmotic energy conversion
Nature Communications (2024)
-
Apparent symmetry rising induced by crystallization inhibition in ternary co-crystallization-driven self-assembly
Nature Communications (2023)
-
Monomicellar assembly to synthesize structured and functional mesoporous carbonaceous nanomaterials
Nature Protocols (2023)
-
One-dimensionally oriented self-assembly of ordered mesoporous nanofibers featuring tailorable mesophases via kinetic control
Nature Communications (2023)