Skip to main content

Thank you for visiting nature.com. You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.

  • Article
  • Published:

The role of defects and excess surface charges at finite temperature for optimizing oxide photoabsorbers

Abstract

Computational screening of materials for solar to fuel conversion technologies has mostly focused on bulk properties, thus neglecting the structure and chemistry of surfaces and interfaces with water. We report a finite temperature study of WO3, a promising anode for photoelectrochemical cells, carried out using first-principles molecular dynamics simulations coupled with many-body perturbation theory. We identified three major factors determining the chemical reactivity of the material interfaced with water: the presence of surface defects, the dynamics of excess charge at the surface, and finite temperature fluctuations of the surface electronic orbitals. These general descriptors are essential for the understanding and prediction of optimal oxide photoabsorbers for water oxidation.

This is a preview of subscription content, access via your institution

Access options

Rent or buy this article

Prices vary by article type

from$1.95

to$39.95

Prices may be subject to local taxes which are calculated during checkout

Fig. 1: Potential energy of the oxygen-deficient surface of WO3, and charge distribution in singlet and triplet configurations (T = 0).
Fig. 2: Localization of valence band holes and excess electrons at the defective WO3 surface.
Fig. 3: Excess charge distribution and dynamics at the surface at finite T.
Fig. 4: Polarons in bulk WO3 as a function of vacancy concentration.
Fig. 5: Electronic levels at the WO3 oxygen-deficient surface and the aqueous interface.
Fig. 6: Energy levels alignment of the band edges of defective WO3, relative to the redox potential of water in vacuo, at T = 0, and for the solvated surface at finite T.

Similar content being viewed by others

Data availability

Data related to this publication are organized using the Qresp software and will be available online at http://www.qresp.org/Exploration.html and include a Jupyter notebook used to generate all of the figures reported in the manuscript.

References

  1. McKone, J. R., Lewis, N. S. & Gray, H. B. Will solar-driven water-splitting devices see the light of day? Chem. Mater. 26, 407–414 (2013).

    Article  CAS  Google Scholar 

  2. Sivula, K. & van de Krol, R. Semiconducting materials for photoelectrochemical energy conversion. Nat. Rev. Mater. 1, 15010 (2016).

    Article  CAS  Google Scholar 

  3. Montoya, J. H. et al. Materials for solar fuels and chemicals. Nat. Mater. 16, 70 (2017).

    Article  CAS  Google Scholar 

  4. Guo, Z., Ambrosio, F., Chen, W., Gono, P. & Pasquarello, A. Alignment of redox levels at semiconductor-water interfaces. Chem. Mater. 30, 94–111 (2018).

    Article  CAS  Google Scholar 

  5. Cheng, H. & Selloni, A. Hydroxide ions at the water/anatase TiO2 (101) interface: Structure and electronic states from first principles molecular dynamics. Langmuir 26, 11518–11525 (2010).

    Article  CAS  Google Scholar 

  6. Toroker, M. C. et al. First principles scheme to evaluate band edge positions in potential transition metal oxide photocatalysts and photoelectrodes. Phys. Chem. Chem. Phys. 13, 16644–16654 (2011).

    Article  CAS  Google Scholar 

  7. Cheng, J. & Sprik, M. Alignment of electronic energy levels at electrochemical interfaces. Phys. Chem. Chem. Phys. 14, 11245–11267 (2012).

    Article  CAS  Google Scholar 

  8. Stevanović, V., Lany, S., Ginley, D. S., Tumas, W. & Zunger, A. Assessing capability of semiconductors to split water using ionization potentials and electron affinities only. Phys. Chem. Chem. Phys. 16, 3706–3714 (2014).

    Article  CAS  Google Scholar 

  9. Kharche, N., Muckerman, J. T. & Hybertsen, M. S. First-principles approach to calculating energy level alignment at aqueous semiconductor interfaces. Phys. Rev. Lett. 113, 176802 (2014).

    Article  CAS  Google Scholar 

  10. Ping, Y., Sundararaman, R. & Goddard, W. A. III Solvation effects on the band edge positions of photocatalysts from first principles. Phys. Chem. Chem. Phys. 17, 30499–30509 (2015).

    Article  CAS  Google Scholar 

  11. Pham, T. A., Lee, D., Schwegler, E. & Galli, G. Interfacial effects on the band edges of functionalized Si surfaces in liquid water. J. Am. Chem. Soc. 136, 17071–17077 (2014).

    Article  CAS  Google Scholar 

  12. Pham, T. A., Ping, Y. & Galli, G. Modelling heterogeneous interfaces for solar water splitting. Nat. Mater. 16, 401–408 (2017).

    Article  CAS  Google Scholar 

  13. Spurgeon, J. M., Velazquez, J. M. & McDowell, M. T. Improving O2 production of WO3 photoanodes with IrO2 in acidic aqueous electrolyte. Phys. Chem. Chem. Phys. 16, 3623–3631 (2014).

    Article  CAS  Google Scholar 

  14. Ping, Y., Goddard, W. A. III & Galli, G. A. Energetics and solvation effects at the photoanode/catalyst interface: ohmic contact versus Schottky barrier. J. Am. Chem. Soc. 137, 5264–5267 (2015).

    Article  CAS  Google Scholar 

  15. Mi, Q. et al. Thermally stable N2-intercalated WO3 photoanodes for water oxidation. J. Am. Chem. Soc. 134, 18318–18324 (2012).

    Article  CAS  Google Scholar 

  16. Jones, F. H. et al. An STM study of surface structures on WO3 (001). Surf. Sci. 359, 107–121 (1996).

    Article  CAS  Google Scholar 

  17. Kalanur, S. S., Duy, L. T. and Seo, H. Recent progress in photoelectrochemical water splitting activity of WO3 photoanodes. Top. Catal. 1–34 (2018).

  18. Wang, W., Janotti, A. & Van de Walle, C. G. Role of oxygen vacancies in crystalline WO3. J. Mater. Chem. C 4, 6641–6648 (2016).

    Article  CAS  Google Scholar 

  19. Gerosa, M., Di Valentin, C., Onida, G., Bottani, C. E. & Pacchioni, G. Anisotropic effects of oxygen vacancies on electrochromic properties and conductivity of γ-monoclinic WO3. J. Phys. Chem. C 120, 11716–11726 (2016).

    Article  CAS  Google Scholar 

  20. Jin, H. et al. Structural and electronic properties of tungsten trioxides: from cluster to solid surface. Theor. Chem. Acc. 130, 103–114 (2011).

    Article  CAS  Google Scholar 

  21. Albanese, E., Di Valentin, C. & Pacchioni, G. H2O adsorption on WO3 and WO3−x(001) surfaces. ACS Appl. Mater. Interfaces 9, 23212–23221 (2017).

    Article  CAS  Google Scholar 

  22. Levy, M. & Pagnier, T. Ab initio DFT computation of SnO2 and WO3 slabs and gas–surface interactions. Sens. Actuators B 126, 204–208 (2007).

    Article  CAS  Google Scholar 

  23. Wang, F., Di Valentin, C. & Pacchioni, G. DFT study of hydrogen adsorption on the monoclinic WO3 (001) surface. J. Phys. Chem. C 116, 10672–10679 (2012).

    Article  CAS  Google Scholar 

  24. Lambert-Mauriat, C., Oison, V., Saadi, L. & Aguir, K. Ab initio study of oxygen point defects on tungsten trioxide surface. Surf. Sci. 606, 40–45 (2012).

    Article  CAS  Google Scholar 

  25. Skone, J. H., Govoni, M. & Galli, G. Self-consistent hybrid functional for condensed systems. Phys. Rev. B 89, 195112 (2014).

    Article  CAS  Google Scholar 

  26. Chen, C., Avila, J., Frantzeskakis, E., Levy, A. & Asensio, M. C. Observation of a two-dimensional liquid of Fröhlich polarons at the bare SrTiO3 surface. Nat. Commun. 6, 8585 (2015).

    Article  CAS  Google Scholar 

  27. McKenna, K. P., Wolf, M. J., Shluger, A. L., Lany, S. & Zunger, A. Two-dimensional polaronic behavior in the binary oxides m-HfO2 and m-ZrO2. Phys. Rev. Lett. 108, 116403 (2012).

    Article  CAS  Google Scholar 

  28. Di Valentin, C., Pacchioni, G. & Selloni, A. Electronic structure of defect states in hydroxylated and reduced rutile TiO2 (110) surfaces. Phys. Rev. Lett. 97, 166803 (2006).

    Article  CAS  Google Scholar 

  29. Salje, E. K. H. Polarons and bipolarons in tungsten oxide, WO3−x. Eur. J. Solid State Inorg. Chem. 31, 805–821 (1994).

    CAS  Google Scholar 

  30. Schirmer, O. F. & Salje, E. The W5+ polaron in crystalline low temperature WO3 ESR and optical absorption. Solid State Commun. 33, 333–336 (1980).

    Article  CAS  Google Scholar 

  31. Selcuk, S. & Selloni, A. Facet-dependent trapping and dynamics of excess electrons at anatase TiO2 surfaces and aqueous interfaces. Nat. Mater. 15, 1107–1112 (2016).

    Article  CAS  Google Scholar 

  32. Kim, J., Lee, C. W. & Choi, W. Platinized WO3 as an environmental photocatalyst that generates OH radicals under visible light. Environ. Sci. Technol. 44, 6849–6854 (2010).

    Article  CAS  Google Scholar 

  33. Xiang, Q., Yu, J. & Wong, P. K. Quantitative characterization of hydroxyl radicals produced by various photocatalysts. J. Colloid Interface Sci. 357, 163–167 (2011).

    Article  CAS  Google Scholar 

  34. Valentin, C. Di A mechanism for the hole-mediated water photooxidation on TiO2 (101) surfaces. J. Phys. Condens. Matter 28, 074002 (2016).

    Article  CAS  Google Scholar 

  35. Valdes, A., Qu, Z.-W., Kroes, G.-J., Rossmeisl, J. & Nørskov, J. K. Oxidation and photo-oxidation of water on TiO2 surface. J. Phys. Chem. C 112, 9872–9879 (2008).

    Article  CAS  Google Scholar 

  36. Liao, P., Keith, J. A. & Carter, E. A. Water oxidation on pure and doped hematite (0001) surfaces: prediction of Co and Ni as effective dopants for electrocatalysis. J. Am. Chem. Soc. 134, 13296–13309 (2012).

    Article  CAS  Google Scholar 

  37. Kröger, M. et al. Role of the deep-lying electronic states of MoO3 in the enhancement of hole-injection in organic thin films. Appl. Phys. Lett. 95, 123301 (2009).

    Article  CAS  Google Scholar 

  38. Meyer, J. et al. Charge generation layers comprising transition metal-oxide/organic interfaces: Electronic structure and charge generation mechanism. Appl. Phys. Lett. 96, 193302 (2010).

    Article  CAS  Google Scholar 

  39. Ping, Y. & Galli, G. Optimizing the band edges of tungsten trioxide for water oxidation: A first-principles study. J. Phys. Chem. C 118, 6019–6028 (2014).

    Article  CAS  Google Scholar 

  40. Gerosa, M. et al. Electronic structure and phase stability of oxide semiconductors: Performance of dielectric-dependent hybrid functional DFT, benchmarked against GW band structure calculations and experiments. Phys. Rev. B 91, 155201 (2015).

    Article  CAS  Google Scholar 

  41. Johansson, M. B. et al. Electronic and optical properties of nanocrystalline WO3 thin films studied by optical spectroscopy and density functional calculations. J. Phys. Condens. Matter 25, 205502 (2013).

    Article  CAS  Google Scholar 

  42. Ping, Y., Rocca, D. & Galli, G. Optical properties of tungsten trioxide from first-principles calculations. Phys. Rev. B 87, 165203 (2013).

    Article  CAS  Google Scholar 

  43. Johansson, M. B., Kristiansen, P. T., Duda, L., Niklasson, G. A. & Österlund, L. Band gap states in nanocrystalline WO3 thin films studied by soft x-ray spectroscopy and optical spectrophotometry. J. Phys. Condens. Matter 28, 475802 (2016).

    Article  CAS  Google Scholar 

  44. Valerini, D. et al. Sputtered WO3 films for water splitting applications. Mater. Sci. Semicond. Process. 42, 150–154 (2016).

    Article  CAS  Google Scholar 

  45. Hong, S. J., Lee, S., Jang, J. S. & Lee, J. S. Heterojunction BiVO4/WO3 electrodes for enhanced photoactivity of water oxidation. Energy Environ. Sci. 4, 1781–1787 (2011).

    Article  CAS  Google Scholar 

  46. Seabold, J. A. & Choi, K.-S. Effect of a cobalt-based oxygen evolution catalyst on the stability and the selectivity of photo-oxidation reactions of a WO3 photoanode. Chem. Mater. 23, 1105–1112 (2011).

    Article  CAS  Google Scholar 

  47. Anik, M. & Cansizoglu, T. Dissolution kinetics of WO3 in acidic solutions. J. Appl. Electrochem. 36, 603–608 (2006).

    Article  CAS  Google Scholar 

  48. Yourey, J. E. & Bartlett, B. M. Electrochemical deposition and photoelectrochemistry of CuWO4, a promising photoanode for water oxidation. J. Mater. Chem. 21, 7651–7660 (2011).

    Article  CAS  Google Scholar 

  49. Shpyrko, O. G. X-ray photon correlation spectroscopy. J. Synchrotron Rad. 21, 1057–1064 (2014).

    Article  CAS  Google Scholar 

  50. Wheeler, D. A., Wang, G., Ling, Y., Li, Y. & Zhang, J. Z. Nanostructured hematite:synthesis, characterization, charge carrier dynamics, and photoelectrochemical properties. Energy Environ. Sci. 5, 6682–6702 (2012).

    Article  CAS  Google Scholar 

  51. Gygi, F. Architecture of Qbox: A scalable first-principles molecular dynamics code. IBM J. Res. Dev. 52, 137–144 (2008).

    Article  Google Scholar 

  52. Giannozzi, P. et al. Quantum espresso: a modular and open-source software project for quantum simulations of materials. J. Phys. Condens. Matter 21, 395502 (2009).

    Article  Google Scholar 

  53. Hamann, D. R. Optimized norm-conserving Vanderbilt pseudopotentials. Phys. Rev. B 88, 085117 (2013).

    Article  CAS  Google Scholar 

  54. Schlipf, M. & Gygi, F. Optimization algorithm for the generation of ONCV pseudopotentials. Comp. Phys. Commun. 196, 36–44 (2015).

    Article  CAS  Google Scholar 

  55. Perdew, J. P., Burke, K. & Ernzerhof, M. Generalized gradient approximation made simple. Phys. Rev. Lett. 77, 3865–3868 (1996).

    Article  CAS  Google Scholar 

  56. Gygi, F. & Duchemin, I. Efficient computation of Hartree–Fock exchange using recursive subspace bisection. J. Chem. Theory Comput. 9, 582–587 (2012).

    Article  CAS  Google Scholar 

  57. Bussi, G., Donadio, D. & Parrinello, M. Canonical sampling through velocity rescaling. J. Chem. Phys. 126, 014101 (2007).

    Article  CAS  Google Scholar 

  58. Govoni, M. & Galli, G. Large scale GW calculations. J. Chem. Theory Comput. 11, 2680–2696 (2015).

    Article  CAS  Google Scholar 

  59. Wilson, H. F., Gygi, F. & Galli, G. Efficient iterative method for calculations of dielectric matrices. Phys. Rev. B 78, 113303 (2008).

    Article  CAS  Google Scholar 

  60. Bengtsson, L. Dipole correction for surface supercell calculations. Phys. Rev. B 59, 12301 (1999).

    Article  CAS  Google Scholar 

Download references

Acknowledgements

This work was supported by the NSF-CCI grant CHE-1305124, using codes developed within the Midwest Integrated Center for Computational Materials (MICCoM) as part of the Computational Materials Sciences Program funded by the US Department of Energy (DOE), Office of Science, Basic Energy Sciences (BES), Materials Sciences and Engineering Division. We thank Z.-X. Shen, T. Cuk, T. Lian and Y. Ping for numerous discussions.

Author information

Authors and Affiliations

Authors

Contributions

Matteo G. and G.G. conceived and designed the calculations. Matteo G. performed the calculations, with numerous discussions with F.G. and Marco G. The manuscript was written primarily by Matteo G. and G.G. All authors discussed the results and commented on the manuscript.

Corresponding author

Correspondence to Giulia Galli.

Ethics declarations

Competing interests

The authors declare no competing interests.

Additional information

Publisher’s note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Gerosa, M., Gygi, F., Govoni, M. et al. The role of defects and excess surface charges at finite temperature for optimizing oxide photoabsorbers. Nature Mater 17, 1122–1127 (2018). https://doi.org/10.1038/s41563-018-0192-4

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1038/s41563-018-0192-4

This article is cited by

Search

Quick links

Nature Briefing

Sign up for the Nature Briefing newsletter — what matters in science, free to your inbox daily.

Get the most important science stories of the day, free in your inbox. Sign up for Nature Briefing