Skip to main content

Thank you for visiting nature.com. You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.

  • Article
  • Published:

Structured nanoscale metallic glass fibres with extreme aspect ratios

Nature Nanotechnology volume 15, pages 875–882 (2020)Cite this article

Subjects

Abstract

Micro- and nanoscale metallic glasses offer exciting opportunities for both fundamental research and applications in healthcare, micro-engineering, optics and electronics. The scientific and technological challenges associated with the fabrication and utilization of nanoscale metallic glasses, however, remain unresolved. Here, we present a simple and scalable approach for the fabrication of metallic glass fibres with nanoscale architectures based on their thermal co-drawing within a polymer matrix with matched rheological properties. Our method yields well-ordered and uniform metallic glasses with controllable feature sizes down to a few tens of nanometres, and aspect ratios greater than 1010. We combine fluid dynamics and advanced in situ transmission electron microscopy analysis to elucidate the interplay between fluid instability and crystallization kinetics that determines the achievable feature sizes. Our approach yields complex fibre architectures that, combined with other functional materials, enable new advanced all-in-fibre devices. We demonstrate in particular an implantable metallic glass-based fibre probe tested in vivo for a stable brain–machine interface that paves the way towards innovative high-performance and multifunctional neuro-probes.

This is a preview of subscription content, access via your institution

Access options

Buy this article

  • Purchase on Springer Link
  • Instant access to full article PDF
Buy now

Prices may be subject to local taxes which are calculated during checkout

Fig. 1: Production of long, uniform, well-ordered micro- and nanoscale MGs via thermal drawing.
Fig. 2: Break-up of in-fibre MGs and their electron microscopy characterization.
Fig. 3: Size-dependent crystallization kinetics investigated via in situ TEM during heating.
Fig. 4: Composite and structured MGs in fibres.
Fig. 5: High-performance optoelectronic fibres using MG ribbons as electrodes.
Fig. 6: Neural stimulation and recording using MG-based fibre probes.

Similar content being viewed by others

Data availability

Data that support the findings of this study are available from the corresponding author upon reasonable request. Source data are provided with this paper.

Code availability

All the scripts are available from the corresponding author upon request.

References

  1. Li, M. X. et al. High-temperature bulk metallic glasses developed by combinatorial methods. Nature 569, 99–103 (2019).

    CAS  Google Scholar 

  2. Guo, H. et al. Tensile ductility and necking of metallic glass. Nat. Mater. 6, 735–739 (2007).

    CAS  Google Scholar 

  3. Jang, D. & Greer, J. R. Transition from a strong-yet-brittle to a stronger-and-ductile state by size reduction of metallic glasses. Nat. Mater. 9, 215–219 (2010).

    CAS  Google Scholar 

  4. Wu, X. L., Guo, Y. Z., Wei, Q. & Wang, W. H. Prevalence of shear banding in compression of Zr41Ti14Cu12.5Ni10Be22.5 pillars as small as 150 nm in diameter. Acta Mater. 57, 3562–3571 (2009).

    CAS  Google Scholar 

  5. Shi, Y. Size-dependent mechanical responses of metallic glasses. Int. Mater. Rev. 64, 163–180 (2019).

    CAS  Google Scholar 

  6. Sha, Z. et al. Notch strengthening in nanoscale metallic glasses. Acta Mater. 169, 147–154 (2019).

    CAS  Google Scholar 

  7. Sohn, S. et al. Nanoscale size effects in crystallization of metallic glass nanorods. Nat. Commun. 6, 8157 (2015).

    Google Scholar 

  8. Sohn, S., Xie, Y., Jung, Y., Schroers, J. & Cha, J. J. Tailoring crystallization phases in metallic glass nanorods via nucleus starvation. Nat. Commun. 8, 1980 (2017).

    Google Scholar 

  9. Greer, A. L. Metallic glasses. Science 267, 1947–1953 (1995).

    CAS  Google Scholar 

  10. Johnson, W. L. Is metallic glass poised to come of age? Nat. Mater. 14, 553–555 (2015).

    Google Scholar 

  11. Miller, M. K. and Liaw, P. K. (eds) Bulk Metallic Glasses (Springer, 2008).

  12. Zberg, B., Uggowitzer, P. J. & Löffler, J. F. MgZnCa glasses without clinically observable hydrogen evolution for biodegradable implants. Nat. Mater. 8, 887–891 (2009).

    CAS  Google Scholar 

  13. Doubek, G. et al. Guided evolution of bulk metallic glass nanostructures: a platform for designing 3D electrocatalytic surfaces. Adv. Mater. 28, 1940–1949 (2016).

    CAS  Google Scholar 

  14. Hu, Y. C. et al. A highly efficient and self-stabilizing metallic-glass catalyst for electrochemical hydrogen generation. Adv. Mater. 28, 10293–10297 (2016).

    CAS  Google Scholar 

  15. Carmo, M. et al. Bulk metallic glass nanowire architecture for electrochemical applications. ACS Nano 5, 2979–2983 (2011).

    CAS  Google Scholar 

  16. Lin, Y. C. et al. Metallic glass as a mechanical material for microscanners. Adv. Funct. Mater. 25, 5677–5682 (2015).

    CAS  Google Scholar 

  17. Kumar, G., Tang, H. X. & Schroers, J. Nanomoulding with amorphous metals. Nature 457, 868–872 (2009).

    CAS  Google Scholar 

  18. Chen, D. Z. et al. Nanometallic glasses: size reduction brings ductility, surface state drives its extent. Nano Lett. 13, 4462–4468 (2013).

    CAS  Google Scholar 

  19. Liu, Y. et al. Metallic glass nanostructures of tunable shape and composition. Nat. Commun. 6, 7043 (2015).

    CAS  Google Scholar 

  20. Nakayama, K. S., Yokoyama, Y., Wada, T., Chen, N. & Inoue, A. Formation of metallic glass nanowires by gas atomization. Nano Lett. 12, 2404–2407 (2012).

    CAS  Google Scholar 

  21. Yi, J. et al. Micro-and nanoscale metallic glassy fibers. Adv. Eng. Mater. 12, 1117–1122 (2010).

    CAS  Google Scholar 

  22. Nakayama, K. S. et al. Controlled formation and mechanical characterization of metallic glassy nanowires. Adv. Mater. 22, 872–875 (2010).

    CAS  Google Scholar 

  23. Schroers, J., Nguyen, T., O’Keeffe, S. & Desai, A. Thermoplastic forming of bulk metallic glass—applications for MEMS and microstructure fabrication. Mater. Sci. Eng. A 449–451, 898–902 (2007).

    Google Scholar 

  24. Jeong, H. W., Hata, S. & Shimokohbe, A. Microforming of three-dimensional microstructures from thin-film metallic glass. J. Microelectromech. Syst. 12, 42–52 (2003).

    CAS  Google Scholar 

  25. Yan, W. et al. Thermally drawn advanced functional fibers: new frontier of flexible electronics. Mater. Today 35, 168–194 (2020).

    CAS  Google Scholar 

  26. Yan, W. et al. Advanced multimaterial electronic and optoelectronic fibers and textiles. Adv. Mater. 31, 1802348 (2019).

    Google Scholar 

  27. Kündig, A. A., Schweizer, T., Schafler, E. & Löffler, J. F. Metallic glass/polymer composites by co-processing at similar viscosities. Scr. Mater. 56, 289–292 (2007).

    Google Scholar 

  28. Tuniz, A. et al. Metamaterial fibres for subdiffraction imaging and focusing at terahertz frequencies over optically long distances. Nat. Commun. 4, 2706 (2013).

    Google Scholar 

  29. Qu, Y. et al. Superelastic multimaterial electronic and photonic fibers and devices via thermal drawing. Adv. Mater. 30, 1707251 (2018).

    Google Scholar 

  30. Tomotika, S. On the instability of a cylindrical thread of a viscous liquid surrounded by another viscous fluid. Proc. R. Soc. A Math. Phys. Eng. Sci. 150, 322–337 (1935).

    Google Scholar 

  31. Bae, D. H., Lim, H. K., Kim, S. H., Kim, D. H. & Kim, W. T. Mechanical behavior of a bulk Cu-Ti-Zr-Ni-Si-Sn metallic glass forming nano-crystal aggregate bands during deformation in the supercooled liquid region. Acta Mater. 50, 1749–1759 (2002).

    CAS  Google Scholar 

  32. Chu, J. P. et al. Nanoimprint of gratings on a bulk metallic glass. Appl. Phys. Lett. 90, 034101 (2007).

    Google Scholar 

  33. Tuniz, A. et al. Stacked-and-drawn metamaterials with magnetic resonances in the terahertz range. Opt. Express 19, 16480–16490 (2011).

    CAS  Google Scholar 

  34. Ibanescu, M., Fink, Y., Fan, S., Thomas, E. L. & Joannopoulos, J. D. An all-dielectric coaxial waveguide. Science 289, 415–419 (2000).

    CAS  Google Scholar 

  35. Canales, A. et al. Multifunctional fibers for simultaneous optical, electrical and chemical interrogation of neural circuits in vivo. Nat. Biotechnol. 33, 277–284 (2015).

    CAS  Google Scholar 

  36. Yan, W. et al. Semiconducting nanowire-based optoelectronic fibers. Adv. Mater. 29, 1700681 (2017).

    Google Scholar 

  37. Zeng, W. et al. Fiber-based wearable electronics: a review of materials, fabrication, devices, and applications. Adv. Mater. 26, 5310–5336 (2014).

    CAS  Google Scholar 

  38. Wang, L. et al. Application challenges in fiber and textile electronics. Adv. Mater. 32, 1901971 (2020).

    CAS  Google Scholar 

  39. Kumar, G., Blawzdziewicz, J. & Schroers, J. Controllable nanoimprinting of metallic glasses: effect of pressure and interfacial properties. Nanotechnology 24, 105301 (2013).

    Google Scholar 

  40. Polikov, V. S., Tresco, P. A. & Reichert, W. M. Response of brain tissue to chronically implanted neural electrodes. J. Neurosci. Methods 148, 1–18 (2005).

    Google Scholar 

  41. Park, S. et al. One-step optogenetics with multifunctional flexible polymer fibers. Nat. Neurosci. 20, 612–619 (2017).

    CAS  Google Scholar 

  42. Pardo, F. et al. Electronic dura mater for long term mutimodal neural interfaces. Science 347, 159–163 (2015).

    Google Scholar 

  43. Khodagholy, D. et al. In vivo recordings of brain activity using organic transistors. Nat. Commun. 4, 1575 (2013).

    Google Scholar 

  44. Wang, K. et al. High-performance graphene-fiber-based neural recording microelectrodes. Adv. Mater. 31, 1805867 (2019).

    Google Scholar 

  45. Lu, L. et al. Soft and MRI compatible neural electrodes from carbon nanotube fibers. Nano Lett. 19, 1577–1586 (2019).

    CAS  Google Scholar 

  46. Lu, C. et al. Flexible and stretchable nanowire-coated fibers for optoelectronic probing of spinal cord circuits. Sci. Adv. 3, e1600955 (2017).

    Google Scholar 

  47. Guo, Y. et al. Polymer composite with carbon nanofibers aligned during thermal drawing as a microelectrode for chronic neural interfaces. ACS Nano 11, 6574–6585 (2017).

    CAS  Google Scholar 

  48. Khodagholy, D. et al. Highly conformable conducting polymer electrodes for in vivo recordings. Adv. Mater. 23, 268–272 (2011).

    Google Scholar 

  49. Xie, C. et al. Three-dimensional macroporous nanoelectronic networks as minimally invasive brain probes. Nat. Mater. 14, 1286–1292 (2015).

    CAS  Google Scholar 

  50. Hong, G. & Lieber, C. M. Novel electrode technologies for neural recordings. Nat. Rev. Neurosci. 20, 330–345 (2019).

    CAS  Google Scholar 

  51. Orf, N. D. et al. Fibre draw synthesis. Proc. Natl Acad. Sci. USA 108, 4743–4747 (2011).

    CAS  Google Scholar 

  52. Khudiyev, T. et al. Electrostrictive microelectromechanical fibres and textiles. Nat. Commun. 8, 1435 (2017).

    Google Scholar 

Download references

Acknowledgements

F.S. thanks the Swiss CCMX Materials Challenge funding scheme, the Swiss National Science Foundation (grant no. 200021_146871) and the European Research Council (ERC Starting Grant 679211 ‘FLOWTONICS’) for their financial support. J.F.L. acknowledges financial support by the PREcision Additive Manufacturing of Precious metals Alloys (PREAMPA) project of the ETH domain and by an ETH research grant (ETH-47 17-1). G.C. acknowledges the European Research Council (ERC-2015-CoG HOW2WALKAGAIN 682999); G.S. acknowledges the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement no. 665667; and S.P.L. thanks the Bertarelli Foundation for support.

Author information

Author notes

  1. Wei Yan

    Present address: Research Laboratory of Electronics, Massachusetts Institute of Technology, Cambridge, MA, USA

Authors and Affiliations

  1. Laboratory of Photonic Materials and Fibre Devices (FIMAP), Institute of Materials, École Polytechnique Fédérale de Lausanne, Lausanne, Switzerland

    Wei Yan, Inès Richard, Tung Nguyen‐Dang, Tapajyoti Das Gupta, Yunpeng Qu & Fabien Sorin

  2. Laboratory of Metal Physics and Technology, Department of Materials, ETH Zurich, Zurich, Switzerland

    Güven Kurtuldu, Jake D. Cao & Jörg F. Löffler

  3. Center for Neuroprosthetics and Brain Mind Institute, School of Life Sciences, École Polytechnique Fédérale de Lausanne, Lausanne, Switzerland

    Nicholas D. James, Jordan W. Squair & Grégoire Courtine

  4. Defitech Center for Interventional Neurotherapies (NeuroRestore), University Hospital Lausanne (CHUV), University of Lausanne (UNIL) and École Polytechnique Fédérale de Lausanne, Lausanne, Switzerland

    Nicholas D. James, Jordan W. Squair & Grégoire Courtine

  5. Bertarelli Foundation Chair in Neuroprosthetic Technology, Laboratory for Soft Bioelectronic Interfaces, Institute of Microengineering, Institute of Bioengineering, Centre for Neuroprosthetics, École Polytechnique Fédérale de Lausanne, Geneva, Switzerland

    Giuseppe Schiavone & Stéphanie P. Lacour

  6. Institute of Materials, École Polytechnique Fédérale de Lausanne, Lausanne, Switzerland

    Reinis Ignatans & Vasiliki Tileli

Authors
  1. Wei Yan
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Inès Richard
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Güven Kurtuldu
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Nicholas D. James
    View author publications

    You can also search for this author in PubMed Google Scholar

  5. Giuseppe Schiavone
    View author publications

    You can also search for this author in PubMed Google Scholar

  6. Jordan W. Squair
    View author publications

    You can also search for this author in PubMed Google Scholar

  7. Tung Nguyen‐Dang
    View author publications

    You can also search for this author in PubMed Google Scholar

  8. Tapajyoti Das Gupta
    View author publications

    You can also search for this author in PubMed Google Scholar

  9. Yunpeng Qu
    View author publications

    You can also search for this author in PubMed Google Scholar

  10. Jake D. Cao
    View author publications

    You can also search for this author in PubMed Google Scholar

  11. Reinis Ignatans
    View author publications

    You can also search for this author in PubMed Google Scholar

  12. Stéphanie P. Lacour
    View author publications

    You can also search for this author in PubMed Google Scholar

  13. Vasiliki Tileli
    View author publications

    You can also search for this author in PubMed Google Scholar

  14. Grégoire Courtine
    View author publications

    You can also search for this author in PubMed Google Scholar

  15. Jörg F. Löffler
    View author publications

    You can also search for this author in PubMed Google Scholar

  16. Fabien Sorin
    View author publications

    You can also search for this author in PubMed Google Scholar

Contributions

W.Y., F.S. and J.F.L. conceived and designed the study. F.S. supervised the project. W.Y. and I.R. fabricated and characterized the fibres. G.K. and J.D.C. prepared the MG samples. I.R. and G.K. performed the differential scanning calorimetry measurements. W.Y. fabricated and characterized the optoelectronic fibres. I.R., W.Y. and T.N. performed the fluid instability modelling. W.Y. prepared the in situ TEM samples, V.T. performed the in situ TEM analysis and W.Y., R.I. and I.R. processed the in situ TEM data. W.Y. prepared the neural fibre probes with input from I.R.; G.S., I.R. and W.Y. characterized the neural probes, and N.J. performed the neural stimulation and recording. W.Y., I.R. and F.S. interpreted the outcome of the experiments, and all authors reviewed and extensively discussed the results. W.Y., I.R. and F.S. wrote the manuscript with input from all authors.

Corresponding author

Correspondence to Fabien Sorin.

Ethics declarations

Competing interests

G.C. and S.P.L. are founders and shareholders of GTXmedical, a company developing neuroprothetic systems, not in direct relation with this work. The authors declare no competing interests.

Additional information

Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Extended data

Extended Data Fig. 1 Comparison of the figure of merit \(F = \frac{\sigma }{t}\) for in-fibre electrodes.

Average conductivity (σ), achievable feature size (t) and deduced figure of merit for structured MGs, and typical in-fibre crystalline metallic and conductive polymeric nanocomposite electrodes. Crystalline metals include liquid metals (for example gallium or galinstan)29, metals with “high” melting points (for example, Sn)28, eutectic alloys with intermediate melting points (for example, SnPb)51, and eutectic alloys with low melting points (for example, BiSn)52. Polymeric composites include carbon-loaded polycarbonate and carbon-loaded polyethylene29,36.

Extended Data Fig. 2 Electrochemical properties of in-fiber MGs.

The cyclic voltammetry (CV) (a) and voltage transient (VT) (b) in vitro characterization of in-fiber MGs for thousands of cycles. The CV measurements (a) illustrate that the stability of the CV curve is orders of magnitude greater than that of crystalline metallic electrodes, and is even on par with that of state-of-the-art carbon nanotubes and graphene fibers44,45 after 2,000 CV cycles. The electrodes were subject to 12k cycles at a scan rate of 100 mV/s between -0.6 and 0.8 V. VT measurements (b) for 100k cycles further demonstrate the long-term electrochemical stability of the MG electrodes. The electrodes were subject to 100k pulse cycles with a current amplitude of 50 µA at 40 Hz. Both measurements were repeated on three electrodes with similar results.

Source data

Extended Data Fig. 3 Localized neural inactivation using MG-based fibre probes.

a, Schematic representation of the experimental setup showing the locations of fibre implantations and the cross-section of the fibre probe that incorporates a chemotrode (3–4 mm length and 300 µm diameter). b, Representative traces of evoked EMG responses recorded from the biceps brachii (forelimb motor cortex stimulation) and the tibialis anterior (hindlimb motor cortex stimulation) before, during, and after injection of muscimol via the chemotrode on the fibre implanted in the hindlimb motor cortex. Similar observations were made in all animals implanted in this manner (n=2). c, Quantification of mean (±SEM) peak to peak amplitudes of EMG responses evoked during each condition (n=2, amplitude averaged from 20 responses in each animal during each condition).

Supplementary information

Supplementary Information

Supplementary Notes 1–12, Figs. 1–16, Tables 1 and 2 and refs. 1–24.

Reporting Summary

Supplementary Video 1

Video recording of the same rat responding to gradually increasing stimulus intensities delivered to the PPn depicting the increased locomotor speed at increased stimulation intensities. This effect was observed in all implanted animals (n = 6).

Source data

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Yan, W., Richard, I., Kurtuldu, G. et al. Structured nanoscale metallic glass fibres with extreme aspect ratios. Nat. Nanotechnol. 15, 875–882 (2020). https://doi.org/10.1038/s41565-020-0747-9

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1038/s41565-020-0747-9

This article is cited by

Search

Advanced search

Quick links

Nature Briefing

Sign up for the Nature Briefing newsletter — what matters in science, free to your inbox daily.

Get the most important science stories of the day, free in your inbox. Sign up for Nature Briefing