Issue 32, 2012

Ag nanoparticle-entrapped hydrogel as promising material for catalytic reduction of organic dyes

Abstract

A granular hydrogel based on chitosan (CTS) and acrylic acid (AA) was prepared using Fenton’s reagent as the redox initiator and N,N′-methylenebisacrylamide as the crosslinker under ambient conditions. The resulting three-dimensional (3D) networks can serve as micro- or nano-reactors for the production of highly stable silver nanoparticles by the in situ reduction of silver nitrate (AgNO3) with sodium borohydride (NaBH4) as reducing agent and Al3+ as surface crosslinking agent. The as-prepared Ag-entrapped hydrogel was successfully confirmed by means of Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), energy dispersive spectroscopy (EDS), field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM) and thermogravimetric analysis (TGA), and then tested to catalyze the NaBH4 reduction of two organic dyes: methylene blue (MB) and Congo red (CR). The catalytic results indicate that within 30 min, MB and CR with an initial concentration of 20 mg L−1 can be reduced completely, and the catalytic activity is independent of initial pH and ion strength. In addition, the Ag-entrapped hydrogel shows excellent reusability for ten successive cycles, with no appreciable decrease in the catalytic effects.

Graphical abstract: Ag nanoparticle-entrapped hydrogel as promising material for catalytic reduction of organic dyes

Supplementary files

Article information

Article type
Paper
Submitted
03 May 2012
Accepted
22 Jun 2012
First published
25 Jun 2012

J. Mater. Chem., 2012,22, 16552-16559

Ag nanoparticle-entrapped hydrogel as promising material for catalytic reduction of organic dyes

Y. Zheng and A. Wang, J. Mater. Chem., 2012, 22, 16552 DOI: 10.1039/C2JM32774K

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Spotlight

Advertisements