Issue 11, 2014

Ne i spectral line shapes in Grimm-type glow discharge

Abstract

We report the results of five Ne I line shapes study in an abnormal Grimm-type glow discharge operating in neon. The spectral lines were observed along the axis of a cylindrical glow discharge parallel (side-on) and perpendicular (end-on) to the cathode surface. The side-on spectra showed a spectral line shift and sometimes a simultaneous shift and split in the cathode fall region of the glow discharge. The results of the measured line shift with the available data for the dc Stark effect were used to estimate the electric field strength in the cathode fall region of the glow discharge. The end-on recorded line profiles showed up to 30% larger half-widths than the side-on recorded line profiles from the negative glow. This effect is a result of the superposition of line emission in the cathode fall region under the influence of the dc Stark effect on the line profile from the negative glow. In addition, wavy features at the far wing in the direction of dc Stark shift were detected. All observed phenomena related to end-on line shapes in Grimm discharge were related quantitatively to the dc Stark effect in the cathode fall region and plasma line broadening in the negative glow region.

Graphical abstract: Ne i spectral line shapes in Grimm-type glow discharge

Article information

Article type
Paper
Submitted
23 May 2014
Accepted
14 Jul 2014
First published
14 Jul 2014

J. Anal. At. Spectrom., 2014,29, 2058-2063

Author version available

Ne I spectral line shapes in Grimm-type glow discharge

N. M. Šišović, N. V. Ivanović, G. Lj. Majstorović and N. Konjević, J. Anal. At. Spectrom., 2014, 29, 2058 DOI: 10.1039/C4JA00162A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements