Issue 27, 2015

Controllable fabrication of immobilized ternary CdS/Pt–TiO2 heteronanostructures toward high-performance visible-light driven photocatalysis

Abstract

Immobilized TiO2 nanotube arrays (NTAs) co-modified with Pt and CdS nanoparticles were fabricated by using the combination of photoreduction and chemical bath deposition methods. XRD, SEM, TEM, XPS, UV-Vis and EDX methods were employed to characterize the microstructure and composition of samples, and the results showed that CdS and Pt NPs were uniformly deposited on the surface of TiO2 nanotubes. The CdS/Pt/TiO2 NTAs exhibited a much higher photocatalytic activity compared to pure TiO2 NTAs and binary CdS (or Pt)/TiO2 NTAs under visible light irradiation. A kinetic study showed that the rate constants of Pt/TiO2, CdS/TiO2 and CdS/Pt/TiO2 NTAs are 0.00736, 0.01717 and 0.02077 min−1, respectively, revealing a remarkable kinetic enhancement in the ternary heteronanostructures due to the synergistic effect of the three components. Besides, the CdS/Pt/TiO2 NTAs exhibit high stability after being used 22 times. Thus we proposed that such ternary heteronanostructures show great promise as immobilized catalysts for high efficient visible-light-driven photocatalysis.

Graphical abstract: Controllable fabrication of immobilized ternary CdS/Pt–TiO2 heteronanostructures toward high-performance visible-light driven photocatalysis

Supplementary files

Article information

Article type
Paper
Submitted
25 Feb 2015
Accepted
01 Jun 2015
First published
01 Jun 2015

Phys. Chem. Chem. Phys., 2015,17, 17755-17761

Controllable fabrication of immobilized ternary CdS/Pt–TiO2 heteronanostructures toward high-performance visible-light driven photocatalysis

H. Gao, H. Wang, Y. Jin, J. Lv, G. Xu, D. Wang, X. Zhang, Z. Chen, Z. Zheng and Y. Wu, Phys. Chem. Chem. Phys., 2015, 17, 17755 DOI: 10.1039/C5CP01128K

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements