Issue 27, 2021

In situ growth of MOF-derived ultrafine molybdenum carbide nanoparticles supported on Ni foam as efficient hydrogen-evolution electrocatalysts

Abstract

The design of a universal synthetic strategy for long-term durable transition metal carbide catalysts with a controllable nanostructure and sufficient active sites for the hydrogen evolution reaction is challenging. Herein, the in situ growth of Mo-containing MOFs was achieved on three-dimensional (3D) nickel foam (NF) through the conversion of pre-deposited bimetal hydroxide/oxide nanosheets (Mo and Co). After pyrolysis, ultrafine Mo carbide nanoparticles encapsulated in cobalt and nitrogen-doped carbon layers were obtained. The ultrafine metal carbide nanoparticles favored the exposure of active sites, the in situ growth enhanced the binding between catalysts and substrate, and the cobalt and nitrogen-doped carbon layer facilitated charge transfer. The MoxC electrode showed a current of 10 mA cm−2 at an overpotential of 33.5 mV under alkaline conditions, which was 6 mV lower than that of the 20% Pt/C/NF electrode. The WxC electrode was also prepared. This work highlights a novel universal strategy to synthesize metal carbide electrodes.

Graphical abstract: In situ growth of MOF-derived ultrafine molybdenum carbide nanoparticles supported on Ni foam as efficient hydrogen-evolution electrocatalysts

Supplementary files

Article information

Article type
Paper
Submitted
15 Apr 2021
Accepted
20 Jun 2021
First published
21 Jun 2021

J. Mater. Chem. A, 2021,9, 15246-15253

In situ growth of MOF-derived ultrafine molybdenum carbide nanoparticles supported on Ni foam as efficient hydrogen-evolution electrocatalysts

Y. Lv and J. R. Gong, J. Mater. Chem. A, 2021, 9, 15246 DOI: 10.1039/D1TA03164C

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements