Issue 43, 2021

In situ etch engineering of Ru doped NiFe(OH)x/NiFe-MOF nanocomposites for boosting the oxygen evolution reaction

Abstract

Metal–organic frameworks (MOFs) have been deemed as promising electrocatalysts for electrochemical water oxidation; however, the poor electronic conductivity and stability are still intractable issues hindering their practical applications. Herein, an efficient in situ etching strategy is employed to transform part of the pristine NiFe-MOF into active NiFe(OH)x and simultaneously induce the exposure of abundant defective areas, which not only facilitates the electron transfer efficiency for the oxygen evolution reaction (OER), but also enables the accessibility to further anchor Ru. Benefiting from the synergistic contributions of Ru, NiFe(OH)x and NiFe-MOF, the as-fabricated Ru/NiFe(OH)x/NiFe-MOF nanocomposite exhibits an enhanced OER activity with a low overpotential of 242 mV at a current density of 10 mA cm−2, and a two-electrode Ru/NiFe(OH)x/NiFe-MOF‖Pt/C electrolyzer also requires a considerably low voltage of 1.54 V at 10 mA cm−2 for overall water splitting. Moreover, taking both experimental and mechanistic results into account, the introduction of a small amount of Ru is able to induce a stronger adsorption between electrochemically active sites and oxygen-related intermediates, thus facilitating the OER activity.

Graphical abstract: In situ etch engineering of Ru doped NiFe(OH)x/NiFe-MOF nanocomposites for boosting the oxygen evolution reaction

Supplementary files

Article information

Article type
Paper
Submitted
30 Jul 2021
Accepted
11 Oct 2021
First published
15 Oct 2021

J. Mater. Chem. A, 2021,9, 24670-24676

In situ etch engineering of Ru doped NiFe(OH)x/NiFe-MOF nanocomposites for boosting the oxygen evolution reaction

D. Liu, H. Xu, C. Wang, C. Ye, R. Yu and Y. Du, J. Mater. Chem. A, 2021, 9, 24670 DOI: 10.1039/D1TA06438J

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements