Issue 7, 1992

Electroconducting transparent film of amorphous copper sulfide on polyethylene substrate

Abstract

The reaction between 1,4,8,11-tetraazacyclotetradecanecopper(II) perchlorate and sodium sulfide gave a transparent amorphous CuS film supported on a polyethylene substrate. The surface electrical resistivity of the film was ca. 10 k Ω□ at 300 K and showed a metal-like temperature dependence down to 250 K.

Article information

Article type
Paper

J. Mater. Chem., 1992,2, 761-762

Electroconducting transparent film of amorphous copper sulfide on polyethylene substrate

M. Inoue, C. Cruz-Vazquez, M. B. Inoue and Q. Fernando, J. Mater. Chem., 1992, 2, 761 DOI: 10.1039/JM9920200761

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Spotlight

Advertisements