Issue 5, 2012

Water-mediated structural tunability of an alkyl/siloxane hybrid: from amorphous material to lamellar structure or bilamellar superstructure

Abstract

Mono-amide cross-linked alkyl/siloxane hybrids (classed as mono-amidosils and represented by the notation m-A(x), where m and A stand for mono and amide, respectively, and x is the number of methylene repeat units) with water-mediated tunable structures have been prepared by means of sol–gel chemistry and self-direct assembly routes from the organosilanes CH3(CH2)x–C([double bond, length as m-dash]O)NH–(CH2)3–Si–(OCH2CH3)3. The amorphous sample m-A(8) has been produced under the stoichiometric conditions (molar ratio Si : ethanol : water = 1 : 4 : 2) used previously to obtain the lamellar bilayer highly organized m-A(14) hybrid material, showing that the length of the pendant alkyl chains affects the degree of order of the materials. Three structurally ordered samples identified as AC-m-A(8) (1 : y) (where AC represents acid catalysis and y is the number of moles of water per mole of Si) have been obtained using the acid catalyzed hydrolytic route and different water contents (y = 600, 300 and 100). Water plays a unique role in the organized mono-amidosils: it not only reverses the natural tendency of the precursor molecule with x = 8 to yield a disordered material, but it also allows the induction of order, leading to the formation of a lamellar structure exclusively in AC-m-A(8) (1 : 100). The presence of a higher water content promotes extra ordering in AC-m-A(8) (1 : 300) and AC-m-A(8) (1 : 600), where the lamellar structure coexists with a bilamellar superstructure. Upon heating the AC-m-A(8) (1 : 600) sample to 120 °C and then cooling it to room temperature, the lamellar structure remained unaffected, while the superstructure was destroyed. The occurrence of the superstructure, although basically associated with the preferential entrapment of water molecules every two lamellae at the siliceous nanodomains, is also correlated with the amideamide hydrogen bonded array. The m-A(8) and AC-m-A(8) (1 : 600) hybrids are multi-wavelength emitters under UV/VIS excitation. The emission spectra exhibit a broad band (300–650 nm) resulting from two contributions: a “blue” band, due to electron–hole recombinations in the NH/C[double bond, length as m-dash]O groups of the amide cross-links, and a “purplish-blue” band, due to oxygen-related defects O–O–Si≡(CO2) in the siliceous nanoclusters. The absolute emission quantum yields determined for m-A(8) and AC-m-A(8) (1 : 600) in the 360–380 nm excitation wavelength range were 0.10 ± 0.01 and 0.15 ± 0.01, respectively. While the lifetime values of the high and low wavelength components of the siliceous-related emission are practically the same for both samples (∼3.5 ms), the lifetime value of the NH/C[double bond, length as m-dash]O component for m-A(8) is higher than that of AC-m-A(8) (1 : 600) (∼292 and ∼156 ms, respectively), suggesting a lower non-radiative transition probability for the former hybrid.

Graphical abstract: Water-mediated structural tunability of an alkyl/siloxane hybrid: from amorphous material to lamellar structure or bilamellar superstructure

Supplementary files

Article information

Article type
Paper
Submitted
30 Aug 2011
Accepted
24 Nov 2011
First published
16 Jan 2012

RSC Adv., 2012,2, 2087-2099

Water-mediated structural tunability of an alkyl/siloxane hybrid: from amorphous material to lamellar structure or bilamellar superstructure

S. C. Nunes, N. J. O. Silva, J. Hümmer, R. A. S. Ferreira, P. Almeida, L. D. Carlos and V. de Zea Bermudez, RSC Adv., 2012, 2, 2087 DOI: 10.1039/C2RA00702A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements