Issue 37, 2015

A supercapacitor constructed with a partially graphitized porous carbon and its performance over a wide working temperature range

Abstract

A supercapacitor that possesses excellent performance in a wide temperature range is constructed with a partially graphitized porous carbon (PGPC) as the electrode material and tetraethylammonium tetrafluoroborate/propylene carbonate (Et4NBF4/PC) as the electrolyte. The PGPC-based electrode shows a very consistent performance in a wide temperature range of −20 to 50 °C. At working temperatures as high as 50 °C and as low as −20 °C, it delivers specific capacitances of ∼148 and ∼135 F g−1, respectively, and the supercapacitors exhibit high energy densities of ∼46 and ∼43 W h kg−1. In particular, the low-temperature capacitive performance and rate capability of PGPC are much better than those of the normally used activated carbon and among the best ones ever-reported for carbon-based supercapacitors. More significantly, the PGPC-based supercapacitor shows excellent cycling performance at all tested working temperatures, with a capacitance retention of ∼98% after 1000 cycles at 5 A g−1 even when the working temperature decreases to −20 °C.

Graphical abstract: A supercapacitor constructed with a partially graphitized porous carbon and its performance over a wide working temperature range

Supplementary files

Article information

Article type
Paper
Submitted
22 Jun 2015
Accepted
14 Jul 2015
First published
14 Jul 2015

J. Mater. Chem. A, 2015,3, 18860-18866

A supercapacitor constructed with a partially graphitized porous carbon and its performance over a wide working temperature range

L. Ye, Q. Liang, Z. Huang, Y. Lei, C. Zhan, Y. Bai, H. Li, F. Kang and Q. Yang, J. Mater. Chem. A, 2015, 3, 18860 DOI: 10.1039/C5TA04581A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements