Issue 31, 2018

Multifunctional electromechanical and thermoelectric polyaniline–poly(vinyl acetate) latex composites for wearable devices

Abstract

This paper reports on the piezoresistive, thermoresistive and thermoelectric behaviour of polyaniline–poly(vinylacetate) (PANI–PVAc) nanocomposites prepared by simple, scalable, green latex technology. The relationship between the electrical properties and the PANI–PVAc ratio was analyzed in the framework of the percolation model and related to morphological and structural changes. Composites with 10, 20 and 30 wt% PANI combine suitable electrical conductivities and the beneficial mechanical properties of the polymer matrix, hardly decreasing the polymer matrix thermostability. They exhibit satisfactory electromechanical and thermoresistive properties for use in sensor applications. Both the gauge factor (GF) and thermal sensitivity decay for PANI contents beyond the percolation threshold. Composites with 10 wt% PANI achieve the highest GF up to 12 for 10% deformation and a thermal sensitivity of 0.25% C−1 between 20–40 °C, suitable for flexible and wearable temperature sensors for monitoring human health. Composites with 20 wt% PANI are appropriate for larger strain deformations and have superior fatigue resistance. The high electrical conductivities of samples with 20 and 30 wt% PANI are essentially preserved after large deformations of ∼300%, which is important in the design of stretchable elastomer conductors; they both provide the best compromise between thermoelectric (ZT) and mechanical properties. This tunability together with the soft nature of the composites paves the way for low-cost, macroscale, diverse applications such as strain and temperature sensors in stretchable and wearable electronics.

Graphical abstract: Multifunctional electromechanical and thermoelectric polyaniline–poly(vinyl acetate) latex composites for wearable devices

Supplementary files

Article information

Article type
Paper
Submitted
14 May 2018
Accepted
20 Jul 2018
First published
23 Jul 2018

J. Mater. Chem. C, 2018,6, 8502-8512

Multifunctional electromechanical and thermoelectric polyaniline–poly(vinyl acetate) latex composites for wearable devices

L. Horta Romarís, M. V. González Rodríguez, B. Huang, P. Costa, A. Lasagabáster Latorre, S. Lanceros-Mendez and M. J. Abad López, J. Mater. Chem. C, 2018, 6, 8502 DOI: 10.1039/C8TC02327A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements