Issue 6, 2020

A novel multilayer composite structured thermoelectric module with high output power

Abstract

Output power is a vital criterion for evaluating the heat–electricity conversion capability of thermoelectric power generators (TEGs). This study for the first time proposes a novel (Bi,Sb)2Te3-based multilayer composite structured thermoelectric module (MCTEM) that can achieve high power output. Parallel heat transfer and electrical parallel connection are simultaneously achieved in an n-type single-leg MCTEM which is composed of several alternately stacked thermoelectric slices and inner electrodes. The extremely low inner resistance (Rin) and high current (I) are 0.03 and 12.7 times those measured in a single-leg traditional module, respectively, and then a maximum output power (Pmax) of 5.8 mW is achieved at ΔT = 35 °C. The effect of the slice number on module performance has been investigated, and the optimal Pmax for n- and p-type single-leg MCTEMs has been achieved when using 3 slices. Based on the optimized single-leg MCTEMs mentioned above, a π-type MCTEM has been designed to improve the output voltage (V) and further enhance the Pmax. The π-type MCTEM achieves a high V of 3.1 mV while maintaining a low Rin of 0.94 mΩ and a large I value of 3.3 A, and then a Pmax of 10.5 W is obtained which is 4.2 times that of the traditional module at ΔT = 35 °C. This new design of a MCTEM provides enlightenment for fabrication and commercialization through the development of high-power TEGs.

Graphical abstract: A novel multilayer composite structured thermoelectric module with high output power

Supplementary files

Article information

Article type
Paper
Submitted
19 Dec 2019
Accepted
13 Jan 2020
First published
17 Jan 2020

J. Mater. Chem. A, 2020,8, 3379-3389

A novel multilayer composite structured thermoelectric module with high output power

X. Wang, H. Wang, W. Su, T. Wang, M. A. Madre, J. Zhai, T. Chen, A. Sotelo and C. Wang, J. Mater. Chem. A, 2020, 8, 3379 DOI: 10.1039/C9TA13881A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements