Abstract
Experiments with an ionisation detector were performed in order to determine whether it was possible to obtain high energy photon beam images for radiotherapy treatment verification. A small prototype detector with a field of view of 78 mm*78 mm and constructed from printed circuit boards was used. The imaging area was a matrix ionisation chamber, filled with air or liquid (2,2,4-trimethylpentane). A minicomputer was used to control the data acquisition electronics and to reconstruct and restore the images. The images were displayed on a viewing console for computed tomography images. The liquid filled detector with a front-rear board separation of 1.0 mm gave the best results. The spatial resolution was about 3.8 mm with a density resolution of 0.5% for a data acquisition time of 120 s. Comparison of the liquid detector images with corresponding metal screen-film detector images showed that the image qualities were the same. An important advantage of the ionisation detector image is that grey scale modification, sharpening and smoothing by digital processing can easily be performed.