Paper The following article is Open access

Micro CT Analysis of Dynamic Damage in Laminates: Impact vs. blast loading

, and

Published under licence by IOP Publishing Ltd
, , Citation Laurence A Coles et al 2017 J. Phys.: Conf. Ser. 842 012077 DOI 10.1088/1742-6596/842/1/012077

1742-6596/842/1/012077

Abstract

Dynamic loading is often an unavoidable condition in various applications of carbon-fibre-reinforced polymers and can cause various modes of damage. Realisation of dynamic damage in composites can differ significantly from that under quasi-static loading conditions. A comprehensive study of damage in composites caused by a wide variety of impact and blast loading is currently lacking. The work presents a detailed analysis of damage in specimens of a 2×2 twill weave T300 carbon-fibre/epoxy composite subjected to ballistic loading with both steel and ice projectiles (with energies from 95 J to 865 J at 70-90 m/s and 300-500 m/s, respectively) and air blast (with incident pressures of 0.4 MPa, 0.6 MPa and 0.8 MPa and wave speeds between 650 m/s and 950 m/s). The resultant damage was analysed in-depth based on detailed volumetric data obtained with high-resolution X-ray micro computed tomography.

Export citation and abstract BibTeX RIS

Content from this work may be used under the terms of the Creative Commons Attribution 3.0 licence. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.

Please wait… references are loading.
10.1088/1742-6596/842/1/012077