Single photoelectron time resolution studies of the PICOSEC-Micromegas detector

, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , and

Published 29 April 2020 © 2020 IOP Publishing Ltd and Sissa Medialab
, , Innovative Particle and Radiation Detectors 2019 (IPRD19) Citation L. Sohl et al 2020 JINST 15 C04053 DOI 10.1088/1748-0221/15/04/C04053

1748-0221/15/04/C04053

Abstract

Detectors with a time resolution of a few tens of picoseconds and long-term durability in high particle fluxes are necessary for an accurate vertex separation in future particle physics experiments. The PICOSEC-Micromegas detector concept is a Micro-Pattern Gaseous Detector (MPGD) based solution addressing this particular challenge. It is based on a Micromegas detector coupled to a Cherenkov radiator and a photocathode. Primary electrons from the incident particles are generated in the photocathode and the time fluctuations due to different primary ionisation positions in the gaseous volume are reduced. The feasibility to reach a good time resolution using this concept was demonstrated in test beam studies, and time resolution values down to 24 ps were measured with muon beams at the CERN SPS accelerator complex. The previously simulated effects of different detector parameters on the time resolution were confirmed by measurements. For these measurements, a femtosecond laser system is used. For a single photoelectron, a time resolution of better than 50 ps is achieved mostly by minimising the drift gap distance. Furthermore, gain and Amplitude-to-Signal ratio (A/Q) with different gas mixtures are compared.

Export citation and abstract BibTeX RIS

10.1088/1748-0221/15/04/C04053