Tight-binding analysis of energy-band structures in quantum wires

Y. Arakawa, T. Yamauchi, and J. N. Schulman
Phys. Rev. B 43, 4732 – Published 15 February 1991
PDFExport Citation

Abstract

The tight-binding method is applied to the analysis of the energy bands of GaAs-Al1xGaxAs quantum wires parallel to the [110] orientation. The results indicate that the effective mass of electrons parallel to the quantum wires in the lowest conduction band in a typical case studied can be as much as 50% larger than that of bulk GaAs and that in the second-lowest conduction band even larger. In the valence band, the reduced symmetry of the quantum wire causes enhanced heavy-hole–light-hole mixing and therefore increased nonparabolicities and reduced effective masses of the uppermost valence band. In a case studied this mass was reduced by a factor of 0.65 compared with a similarly dimensioned quantum well. The negative-effective-mass properties of the lower valence subbands are also increased relative to quantum wells. These changes in the energy-band structure would significantly affect mobilities, the transitions between subbands, and lasing characteristics of quantum-wire devices.

  • Received 15 October 1990

DOI:https://doi.org/10.1103/PhysRevB.43.4732

©1991 American Physical Society

Authors & Affiliations

Y. Arakawa and T. Yamauchi

  • Research Center for Advanced Science and Technology, University of Tokyo, 4-6-1 Komaba, Meguro-ku, Tokyo 153, Japan

J. N. Schulman

  • Hughes Research Laboratories, Malibu, California 90265

References (Subscription Required)

Click to Expand
Issue

Vol. 43, Iss. 6 — 15 February 1991

Reuse & Permissions
Access Options
Author publication services for translation and copyediting assistance advertisement

Authorization Required


×
×

Images

×

Sign up to receive regular email alerts from Physical Review B

Log In

Cancel
×

Search


Article Lookup

Paste a citation or DOI

Enter a citation
×