We report on the use of triaxial magnetic fields to create a variety of isotropic and anisotropic magnetic particle/polymer composites with significantly enhanced magnetic susceptibilities. A triaxial field is a superposition of three orthogonal ac magnetic fields, each generated by a Helmholtz coil in series resonance with a tunable capacitor bank. Field frequencies are in the range of 150–400 Hz. Because both the field amplitudes and frequencies can be varied, a rich variety of structures can be created. Perhaps the most unusual effects occur when either two or three of the field components are heterodyned to give beat frequencies on the order of 1 Hz. This leads to a striking particle dynamics that evolves into surprising structures during resin gelation. These structures are found to have perhaps the highest susceptibility that a particle composite can have. The susceptibility anisotropy of these composites can be controlled over a wide range by judicious adjustment of the relative field amplitudes. These experimental data are supported by large-scale Brownian dynamics simulations of the complex many-body interactions that occur in triaxial magnetic fields. These simulations show that athermal three-dimensional field heterodyning leads to structures with a susceptibility that is as high as that achieved with thermal annealing. Thus with coherent particle motions we can achieve magnetostatic energies that are quite close to the ground state.

• Received 16 April 2003

DOI:https://doi.org/10.1103/PhysRevE.69.021508