Wavelet signal processing for enhanced Lamb-wave defect detection in composite plates using optical fiber detection

Wieslaw J. Staszewski; S. Gareth Pierce; Keith Worden; Wayne R. Philp; Geoffrey R. Tomlinson; Brian Culshaw

doi:10.1117/1.601380

1 July 1997 Wavelet signal processing for enhanced Lamb-wave defect detection in composite plates using optical fiber detection

Wieslaw J. Staszewski, S. Gareth Pierce, Keith Worden, Wayne R. Philp, Geoffrey R. Tomlinson, Brian Culshaw

Author Affiliations +

Optical Engineering, Vol. 36, Issue 7, (July 1997). https://doi.org/10.1117/1.601380

A wavelet-transform-based technique to enhance defect detection in a carbon fiber composite plate interrogated using ultrasonic Lamb waves and incorporating an optical fiber receiver is described. Fundamental symmetric (S0) Lamb waves were introduced into the sample plates using a conventional piezoelectric transducer operating at a frequency of around 250 kHz. Coupling into the plates was achieved using a perspex phase-matching wedge. The propagating acoustic pulses were monitored using a simple embedded or surface-mounted singlemode optical fiber forming the signal arm of an optical fiber Mach- Zehnder interferometer. The direct Lamb wave reflections from delaminations in the sample plates were of low amplitude, although a degree of defect visibility enhancement was achieved by correlating the received signals with the outgoing ultrasonic pulse. A considerable improvement in the defect visibility over the latter technique was found by using a wavelet-transform-based novelty technique to identify the defective plate zones. Using an orthogonal wavelet transform to compress the data, important structurally related features were extracted by setting appropriate threshold levels on the wavelet coefficients. The reconstructed (uncompressed) data from defect-free portions of the plate were used to construct a template representing a normal condition. Defect location was achieved by analysis of the departure of signals arising from defective plate regions from the no-fault condition template.

Citation Download Citation

Wieslaw J. Staszewski, S. Gareth Pierce, Keith Worden, Wayne R. Philp, Geoffrey R. Tomlinson, and Brian Culshaw "Wavelet signal processing for enhanced Lamb-wave defect detection in composite plates using optical fiber detection," Optical Engineering 36(7), (1 July 1997). https://doi.org/10.1117/1.601380

Published: 1 July 1997

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available