Paper
22 March 2012 Printability and inspectability of defects on EUV blank for 2xnm hp HVM application
Author Affiliations +
Abstract
The availability of defect-free masks remains one of the key challenges for inserting extreme ultraviolet lithography (EUVL) into high volume manufacturing. Recently both blank suppliers achieved 1-digit number of defects at 60nm in size using their M1350s. In this paper, a full field EUV mask with Teron 61X blank inspection is fabricated to see the printability of various defects on the blank using NXE 3100. Minimum printable blank defect size is 23nm in SEVD using real blank defect. Current defect level on blank with Teron 61X Phasur has been up to 70 in 132 X 132mm2. More defect reduction as well as advanced blank inspection tools to capture all printable defects should be prepared for HVM. 3.6X reduction of blank defects per year is required to achieve the requirement of HVM in the application of memory device with EUVL. Furthermore, blank defect mitigation and compensational repair techniques during mask process needs to be developed to achieve printable defect free on the wafer.
© (2012) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Sungmin Huh, In-Yong Kang, Chang Young Jeong, Jihoon Na, Dong Ryul Lee, Hwan-seok Seo, Seong-Sue Kim, Chan-Uk Jeon, Jonggul Doh, Gregg Inderhees, and Jinho Ahn "Printability and inspectability of defects on EUV blank for 2xnm hp HVM application", Proc. SPIE 8322, Extreme Ultraviolet (EUV) Lithography III, 83220K (22 March 2012); https://doi.org/10.1117/12.916021
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Inspection

Photomasks

Extreme ultraviolet

Extreme ultraviolet lithography

Semiconducting wafers

Bismuth

Defect inspection

Back to Top