Abstract
Bulk samples of Al-Cu-Fe quasicrystals with excellent mechanical and tribological properties were prepared by high-pressure compaction followed by pressureless sintering. Cold pressing at 8–9 GPa was shown to cause severe plastic deformation of the Al-Cu-Fe quasicrystals.
Similar content being viewed by others
References
Kaloshkin, S.D., Tcherdyntsev, V.V., and Danilov, V.D., Preparation of Al-Cu-Fe quasicrystalline powdered alloys and related materials by mechanical activation, Crystallogr. Rep., 2007, vol. 52, no. 6, p. 953.
Petrzhik, M.I. and Levashov, E.A., Modern methods of investigating functional surfaces of advanced materials by mechanical contact testing, Crystallogr. Rep., 2007, vol. 52, no. 6, p. 966.
Brunet, P., Zhang, L.-M., Sordelet, D.J., et al., Comparative study of microstructural and tribological properties of sintered, bulk icosahedral samples, Mater. Sci. Eng., 2000, vols. 294–296, p. 74.
Ivanov, A.S., Kruglov, V.S., Pal’, A.F., et al., Synthesis and characterization of macrocomposites based on nickel-coated quasi-crystalline Al-Cu-Fe powder, Tech. Phys. Lett., 2011, vol. 37, no. 10, p. 917.
Giacometti, E., Baluc, N., Bonneville, J., and Rabier, J., Microindentation of Al-Cu-Fe icosahedral quasicrystal, Scr. Mater., 1999, vol. 41, p. 989.
Ekimov, E.A., Sadykov, R.A., Gierlotka, S., et al., A high-pressure cell for high-temperature experiments in a toroid-type chamber, Instrum. Exp. Tech., 2004, vol. 47, no. 2, p. 276.
Niihara, K., Morena, R., and Hasselman, D.P.H., Evaluation of K IC of brittle solids by the indentation method with low crack-to-indent ratios, J. Mater. Sci. Lett., 1982, vol. 1, p. 13.
Jiang, X., Chen, Z., Wang, Y., and Zhou, D., The crystalline to quasicrystalline phase transformation in rapidly solidified Al65Cu20Fe15 powder at high pressure and high temperature, Scr. Metall. Mater., 1992, vol. 27, p. 1401.
Dub, S.N., Milman, Yu.V., Lozko, D.V., and Belous, A.N., The anomalous behavior of Al-Cu-Fe quasicrystal during nanoindentation, J. Mater. Sci. Lett., 2001, vol. 20, no. 11, p. 1043.
Lefebvre, S., Bessiere, M., Calvayrac, Y., et al., Stability of icosahedral Al-Cu-Fe and two approximant phases under high pressure up to 35 GPa, Philos. Mag. B., 1995, vol. 72, p. 101.
Wollgarten, M., Saka, H., and Inoue, A., Microstructural investigation of the brittle-to-ductile transition in Al-Pd-Mn quasicrystals, Philos. Mag. A, 1999, vol. 79, no. 9, p. 2195.
Kanjilal, A., Nanoquasicrystallites formation in stable icosahedral Al-Cu-Fe quasicrystalline thin films, Nanotechnology, 2002, vol. 13, p. 682.
Mil’man, Yu.V., Efimov, N.A., Ul’shin, S.V., et al., Mechanical properties of Al-Cu-Fe alloys sintered at high pressure, Powder Metall. Met. Ceram., 2010, vol. 49, nos. 5–6, p. 280.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © E.A. Ekimov, V.P. Sirotinkin, M.I. Petrzhik, E.L. Gromnitskaya, 2014, published in Neorganicheskie Materialy, 2014, Vol. 50, No. 1, pp. 58–63.
Rights and permissions
About this article
Cite this article
Ekimov, E.A., Sirotinkin, V.P., Petrzhik, M.I. et al. Sintering, structure, and physicomechanical properties of Al-Cu-Fe quasicrystals compacted at high pressure. Inorg Mater 50, 52–57 (2014). https://doi.org/10.1134/S002016851401004X
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S002016851401004X