Abstract
A mathematical model describing the unsteady creep of metals under complex loading is proposed. The results of numerical simulation of creep of St.304 steel in complex regimes of block multiaxial cyclic deformation are given. The numerical calculation results obtained are compared with the data of full-scale experiments. Creep is simulated in complex deformation processes accompanied by the rotation of main regions of stress, strain, and creep strain tensors.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
I. A. Volkov and Yu. G. Korotkikh, Equations of State of Viscoelastoplastic Media with Damage (Fizmatlit, Moscow, 2008) [in Russian].
I. A. Volkov, V. V. Egunov, L. A. Igumnov, et al., “Assessment of the Service Life of Structural Steels by Using Degradation Models with Allowance for Fatigue and Creep of the Material,” Prikl. Mekh. Tekh. Fiz. 56 (6), 70–83 (2015) [J. Appl. Mech. Tech. Phys. 56 (6), 995–1006 (2015)].
A. M. Lokoshchenko, Creep and Long-Lasting Strength of Metals (Fizmatlit, Moscow, 2016) [in Russian].
Yu. N. Rabotnov, Creep Problems in Structural Elements (Nauka, Moscow, 1966; North-Holland, 1969).
J. T. Boyle and J. Spence, Stress Analysis for Creep (Butterworths, 1983).
D. A. Gokhfeld and O. S. Sadakov, Plasticity and Creep of Structural Elements Under Repeated Loading (Mashinostroenie, Moscow, 1984) [in Russian].
J. J. Blass and W. W. Findley, “Shot Time Biaxial Creep of Aluminum Alloy with Abrupt Changes of Temperature and State of Stress,” Trans. ASME, J. Appl. Mech., Ser. E, No. 2 (1971).
S. Murakami and N. Ohno, “A Constitutive Equation of Creep Based on the Concept of a Creep-Hardening Surface,” Int. J. Solids Struct. 18 (7), 597–609 (1982).
P. Perzyna, “Fundamental Problems in Viscoplasticity,” Adv. Appl. Mech. 9, 243–377 (1966).
J. L. Chaboche, “Constitutive Equation for Cyclic Plasticity and Cyclic Viscoplasticity,” Int. J. Plasticity 5 (3), 247–302 (1989).
R. D. Krieg, J. C. Swearengen, and R. W. Rohde, “A Physically-Based Internal Variable Model for Rate-Dependent Plasticity,” in Inelastic Behavior of Pressure Vessel and Piping Components (ASME, New York, 1978).
N. N. Malinin and G. M. Khazhinskii, “To the Construction of the Creep Theory with an Anisotropic Hardening,” Izv. Akad. Nauk SSSR, Mekh. Tv. Tela, No. 3, 148–152 (1969).
I. A. Volkov, L. A. Igumnov, and Yu. G. Korotkikh, Applied Theory of Viscoplasticity (Nizhny Novgorod State University, Nizhny Novgorod, 2015) [in Russian].
I. A. Volkov, L. A. Igumnov, D. A. Kazakov, et al., “Constitutive Equations of Nonstationary Creep for a Complex Stress State,” Probl. Prochn. Plast., No. 78, 436–451 (2016).
Y. Ohashi, N. Ohno, and M. Kawai, “Evaluation of Creep Constitutive Equations for Type 304 Stainless Steel Under Repeated Multiaxial Loading,” ASME J. Eng. Mat. Tech. 104, 159–164 (1982).
C. A. Pugh, “Constitutive Equations for Creep Analysis of LMFBR Component,” in Advances in the Design of the Elevated Temperature Environment (ASME, New York, 1975).
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © I.A. Volkov, L.A. Igumnov, D.A. Kazakov, D.N. Shishulin, I.S. Tarasov.
Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, Vol. 59, No. 3, pp. 191–202, May–June, 2018.
Rights and permissions
About this article
Cite this article
Volkov, I.A., Igumnov, L.A., Kazakov, D.A. et al. State Equations of Unsteady Creep under Complex Loading. J Appl Mech Tech Phy 59, 551–560 (2018). https://doi.org/10.1134/S0021894418030203
Received:
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S0021894418030203