Abstract
The use of alcohols as cathodic inhibitors in HCl solution results in a negative shift of corrosion potential (Ecor). The alcohols concentration of 20 mM, was shown to be the best one. EDX analyses of the alloys showed different intermetallics at the surface of alloys, which made the activity of alcohols in the studied solutions change depending on the surface morphology of the alloys. Experiments indicated that the alcohols adsorption of the alloys in HCl solution obeys Temkin adsorption isotherm rule. The corrosion of the alloys in the solutions was affected by alloying with Cu, Zn, and Mg. For a comparison, pure forms of Al, Cu, Zn, Mg were tested in the solutions.
Similar content being viewed by others
References
Sheasby, P.G., Korozyon, 1993, vol. 5, p. 3.
Ambat, R. and Dwarakadasa, E.S., British Corrosion Journal, 1993, vol. 28, p. 142.
Shimizu, K., Kobayashi, K., Thompson, G.E., et al., Corrosion Science, 1997, vol. 39, p. 281.
Bockris, J.O’M. and Yang, B., Electrochimica Acta, 1991, vol. 36, p. 1333.
Ambat, R. and Dwarakadasa, E.S., J. Applied Electrochemistry, 1994, vol. 24, p. 911.
Despic, A.R., Radosevic, J., Dabic, P., and Kliskic, M., Electrochimica Acta, 1990, vol. 35, p. 1743.
Tedeshi, R.J., Corrosion, 1975, vol. 31, p. 130.
Fiaud, C., Harch, A., Mallouh, D., and Tzinmann, M., Corrosion Science, 1993, vol. 35, p. 1437.
Aksut, A.A. and Onal, A.N., Corr. Sci., 1997, vol. 39, p. 761.
Onal, A.N., The Effect of Acetylenic Alcohols on the Corrosion of Iron, Chromium and Iron-Chromium Alloys. Ph.D. Theses, Ankara, 2000, 97 p.
Bockris, J.O’M. and Yang, B., J. Electrochemical Society, 1991, vol. 138, p. 2237.
Frigrani, A. and Trabanelli, R., Corrosion, 1999, vol. 55, p. 653.
Joyce, M.R., Styles, C.M., and Reed, P.A.S., International Journal of Fatigue, 2003, vol. 25, p. 863.
Liao, H., Sun, Yu, and Sun, G., Materials Science and Engineering, 2002, vol. A335, p. 62.
Mazhar, A.A., Arab, S.T., and Noor, E.A., J. Applied Electrochemistry, 2001, vol. 31, p. 1131.
Zhang, R., Cao, Q., Pang, S. et al., Science and Technology of Advanced Materials, 2001, vol. 2, p. 3.
Monticelli, C., Zucchi, F., Brunoro, G., and Trabanelli, G., J. Applied Electrochemistry, 1997, vol. 27, p. 325.
Onal, A.N. and Aksut, A.A., Anti Corrosion Methods, 2000, vol. 47, p. 339.
Barbucci, A., Cerisola, G., Bruzzone, G., et al., Intermetallics, 2000, vol. 8, p. 305.
Cabot, P.L., Centellas, F.A., Perez, E., and Loukili, R., Electrochimica Acta, 1993, vol. 38, p. 2741.
Sahin, M. and Bilgic, S., Applied Surface Science, 1999, vol. 147, p. 27.
Bilgic, S. and Sahin, M., Materials Chemistry and Physics, 2001, vol. 70, p. 290.
Author information
Authors and Affiliations
Additional information
The text was submitted by the authors in English.
Rights and permissions
About this article
Cite this article
Buyuksagis, A., Aksut, A.A. Effects of alcohols on the corrosion of aluminum alloys in 1 N HCl solution. Part II. Prot Met 44, 514–520 (2008). https://doi.org/10.1134/S0033173208050184
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S0033173208050184