Abstract
Under consideration is the influence of various crushing techniques on the particle-size distribution and selectivity of dissociation of basic mineral components in the composition of Dalnegorsk complex ore under pretreatment. Distribution of basic elements per size grades is determined in crushing feed and in products of magnetic separation and flotation. Conditions of preparation and separation of disintegration products are described. The authors illustrate the change in the dissociation selectivity criterion in jaw crushing and in disintegration in a press to prepare different-size ore for processing by magnetic separation and flotation.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
Change history
20 July 2018
Due to a technical error volume 53, issue 4, 2017 has been published online with an incorrect cover data. The issue has erroneously been distributed with the cover date July 2018. The correct caver date for volume 53, issue 4 should be July 2017.
References
Revnivtsev, V.I., Gaponov G.V., Zarogatsky, L.P., et al., Selektivnoe razrushenie mineralov (Selective Mineral Disintegration), Moscow: Nedra, 1988.
Fedotov, P.K., Razrushenie rudy v roller-presse (Ore Disintegration in Roller-Press), Moscow: Geoinformmark, 2006.
Fedotov, P.K., Modeling Fracture of Ore Particles in a Layer under Pressure, J. Min. Sci., 2014, vol. 50, no. 4, pp. 71–77.
Khopunov, E.A., Selektivnoe razrushenie mineral’nogo i tekhnogennogo syr’ya (Selective Disintegration of Mineral and Technogenic Materials), Ekaterinburg: OOO “UIPTs”, 2013.
Herbst, J.A., Mular, M.A., Pate, W.T., and Qiu, X., Detailed Modeling of an HPGR/HRC for Prediction of Plant Scale Unit Performance, International Autogenous Grinding, Semiautogenous Grinding, and High Pressure Grinding Roll Technology, 2011. pp. 46–47.
Kalala, J.T., Dong, H., and Hinde, A.L., Using Piston-Die Press to Predict the Breakage Behavior of HPGR, International Autogenous Grinding Semiautogenous Grinding and High Pressure Grinding Roll Technology, 2011, pp. 60–75.
Krasnov, G.D. and Chikhladze, V.V., Ore Crushing by Triaxial Compression Technique, Proc. 1st Int. Sci.-Pract. Seminar after V.A. Olevsky: Disintegration of Mineral and Technogenic Materials in Mining and Construction Industries, Stavropol, 2007, pp. 21–26.
Krasnov, G.D., Podgaetsky, A.V., and Chikhladze, V.V., Experience in Modeling the Crushing in Roller-Press, GIAB, 2009, vol. 14, no. 12, pp. 89–102.
Kuznetsova, I.N., Lavrinenko, A.A., and Chikhladze, V.V., On Selectivity of Disintegration of Sphalerite Ore in Magnetic Separation and Flotation of Complex Ores, Problemy osvoeniya nedr v XXI veke glazami molodykh (The Mineral Resources Management in the 21st century in the Eyes of Young Generation), Moscow: IPKON RAN, 2015, pp. 282–288.
Krasnov, G.D. and Chikhladze, V.V., Bogdanovich, A.V., and Kuzmin, I.V., Process Specification of Geomaterials Crushed by Triaxial Compression, Gorny Zh., 2012, no. 8, pp. 102–107.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © N.G. Barnov, A.A. Lavrinenko, O.G. Lusinyan, V.V. Chikhladze, 2017, published in Fiziko-Tekhnicheskie Problemy Razrabotki Poleznykh Iskopaemykh, 2017, No. 4, pp. 175–182.
Rights and permissions
About this article
Cite this article
Barnov, N.G., Lavrinenko, A.A., Lusinyan, O.G. et al. Effect of a Crushing Technique on Lead–Zinc Ore Processing Performance. J Min Sci 53, 771–777 (2018). https://doi.org/10.1134/S1062739117042765
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1062739117042765