skip to main content
10.1145/1233501.1233667acmconferencesArticle/Chapter ViewAbstractPublication PagesiccadConference Proceedingsconference-collections
Article

Yield prediction for 3D capacitive interconnections

Published:05 November 2006Publication History

ABSTRACT

Capacitive interconnections are very promising structures for high-speed and low-power signaling in 3D packages. Since the performance of AC links, in terms of Band-Width and Bit-Error-Rate (BER), depends on assembly and synchronization accuracy we performed a statistical analysis of assembly procedures and communication circuits. In this paper we present a yield prediction methodology for 3D capacitive links: starting from the analysis of communication circuits and BER measurements, we analyze stacking variability in order to predict reliability and performance. The proposed parametric yield analysis is demonstrated on a test-case, with constrained inter-electrode coupling and operating frequency.

References

  1. Fazzi, A. et al. "A 0.14mW/Gbps High-Density Capacitive Interface for 3D System Integration". In CICC 2005, pp.101--104, September 2005.Google ScholarGoogle Scholar
  2. Charlet, B. et al. "Chip-to-Chip Interconnections Based on the Wireless Capacitive Coupling for 3D Integration", In MAM 2006, March 2006.Google ScholarGoogle Scholar
  3. Luo, L. et al. "3Gb/s AC-Coupled Chip-to-Chip Communication using Low-Swing Pulse Receiver". In ISSCC 2005, pp.522--523, February 2005.Google ScholarGoogle Scholar
  4. Miura, N. et al. "Analysis and design of inductive coupling and transceiver circuit for inductive inter-chip wireless superconnect". In IEEE J. Solid-State Circuits Volume 40, Issue 4, pp.829--837, April 2005.Google ScholarGoogle ScholarCross RefCross Ref
  5. Jian Xu et al. "2.8 Gb/s inductively coupled interconnect for 3D ICs". In Symposium on VLSI Circuits 2005, pp.352--355, June 2005.Google ScholarGoogle Scholar
  6. Kanda, K. et al. "1.27Gb/s/pin 3mW/pin wireless superconnect (WSC) interface scheme". In ISSCC 2003, pp.186--187, February 2003.Google ScholarGoogle Scholar
  7. Drost, R. et al. "Proximity communication". In IEEE J. Solid-State Circuits, Volume 39, Issue 9, pp.1529--1535, September 2004.Google ScholarGoogle ScholarCross RefCross Ref
  8. Visweswariah, C. "Death, taxes and failing chips". In DAC 2003 pp.343--347, June 2003. Google ScholarGoogle ScholarDigital LibraryDigital Library
  9. Ashish Srivastava et al. "Accurate and Efficient Gate-Level Parametric Yield Estimation Considering Correlated Variations in Leakage Power and Performance". In DAC 2005 pp.535--540, June 2005. Google ScholarGoogle ScholarDigital LibraryDigital Library
  10. Hongliang Chang et al. "Statistical Timing Analysis Considering Spatial Correlations Using a Single Pert-Like Traversal". In ICCAD 2003 pp.621--625, June 2005. Google ScholarGoogle ScholarDigital LibraryDigital Library
  11. W. R. Davis et al. "Demystifying 3D ICs: The Pros and Cons of Going Vertical". In Design & Test of Computers, IEEE Volume 22, Issue 6, pp.496--510, June 2005. Google ScholarGoogle ScholarDigital LibraryDigital Library
  12. K. Banerjee et al. "3-D ICs: a novel chip design for improving deep-submicrometer interconnect performance and systems-on-chip integration"., In Proceedings of the IEEE, 89(5):602--633, May 2001.Google ScholarGoogle ScholarCross RefCross Ref
  13. S. J. Souri et al. "Multiple Si layer ICs: motivation, performance analysis, and design implications". In Proc. of the Design Automation Conference, pp.213--220, June 2000. Google ScholarGoogle ScholarDigital LibraryDigital Library
  14. K. Bernstein et al. "Design and CAD challenges in sub-90nm CMOS technologies". In Intl. Conf. on Computer Aided Design pp.129--136, November 2003. Google ScholarGoogle ScholarDigital LibraryDigital Library
  15. www.mathworks.comGoogle ScholarGoogle Scholar
  16. www.comsol.comGoogle ScholarGoogle Scholar

Index Terms

  1. Yield prediction for 3D capacitive interconnections

          Recommendations

          Comments

          Login options

          Check if you have access through your login credentials or your institution to get full access on this article.

          Sign in
          • Published in

            cover image ACM Conferences
            ICCAD '06: Proceedings of the 2006 IEEE/ACM international conference on Computer-aided design
            November 2006
            147 pages
            ISBN:1595933891
            DOI:10.1145/1233501

            Copyright © 2006 ACM

            Permission to make digital or hard copies of all or part of this work for personal or classroom use is granted without fee provided that copies are not made or distributed for profit or commercial advantage and that copies bear this notice and the full citation on the first page. Copyrights for components of this work owned by others than ACM must be honored. Abstracting with credit is permitted. To copy otherwise, or republish, to post on servers or to redistribute to lists, requires prior specific permission and/or a fee. Request permissions from [email protected]

            Publisher

            Association for Computing Machinery

            New York, NY, United States

            Publication History

            • Published: 5 November 2006

            Permissions

            Request permissions about this article.

            Request Permissions

            Check for updates

            Qualifiers

            • Article

            Acceptance Rates

            Overall Acceptance Rate457of1,762submissions,26%

            Upcoming Conference

            ICCAD '24
            IEEE/ACM International Conference on Computer-Aided Design
            October 27 - 31, 2024
            New York , NY , USA
          • Article Metrics

            • Downloads (Last 12 months)0
            • Downloads (Last 6 weeks)0

            Other Metrics

          PDF Format

          View or Download as a PDF file.

          PDF

          eReader

          View online with eReader.

          eReader