Composting for a More Sustainable Palm Oil Waste Management: A Systematic Literature Review

Supriatna, Jajang; Setiawati, Mieke Rochimi; Sudirja, Rija; Suherman, Cucu; Bonneau, Xavier

doi:https://doi.org/10.1155/2022/5073059

The Scientific World Journal

On this page

Abstract Introduction Materials and Methods Results and Discussion Conclusions Data Availability Conflicts of Interest Authors’ Contributions Acknowledgments References Copyright Related Articles

Review Article | Open Access

Volume 2022 | Article ID 5073059 | https://doi.org/10.1155/2022/5073059

Composting for a More Sustainable Palm Oil Waste Management: A Systematic Literature Review

Jajang Supriatna,^1,2Mieke Rochimi Setiawati,³Rija Sudirja,³Cucu Suherman,⁴and Xavier Bonneau⁵

Academic Editor: Maurizio Petruccioli

Received04 Jul 2022

Revised25 Oct 2022

Accepted31 Oct 2022

Published10 Nov 2022

Abstract

Palm oil production has increased significantly, specifically in Indonesia and Malaysia. However, this growth has raised environmental concerns due to the high discharge of empty fruit bunches, palm oil mill effluents, and other solid wastes. Therefore, this study aims to examine the treatment of palm oil waste by composting and systematically review insights into its application through a systematic literature review approach. Among the 1155 articles, a total of 135 were selected for a systematic review of palm oil waste management developments and their applications, while 14 were used for determining compost quality according to the criteria and requirements established in the systematic literature review. Moreover, using Egger’s test, JAMOVI 1.6.23 software was used to analyze random effects models with 95% confidence intervals and publication bias. The results showed that palm oil waste was optimally treated by composting, which is considered as a sustainable technology for protecting the environment, human safety, and economic value. The in-vessel method with a controlled composting chamber is the best system with a minimum time of 14 days. However, it requires tight control and provides a final product with a high microbial colony form outdoors and indoors compared to the windrow system. This study is useful to see the bias of research results and helps to find new studies that need to be developed, especially in this case related to the management of palm oil waste into organic compost fertilizer and its application methods in the field. It is suggested that applying palm oil waste or compost is mainly performed by mulching. In contrast, new challenges for better processing to produce organic fertilizers and applicable technologies for sustainable waste management are recommended. The method must be affordable, efficient, and practical, combining compost quality with maximum nutrient recovery.

1. Introduction

Indonesia and Malaysia represent over 80% of the world’s palm oil production [1]. Meanwhile, processing one ton of fresh fruit bunches (FFBs) will produce waste in the form of empty fruit bunches (EFBs) up to 0.20–0.23 ton, mesocarp fiber 0.12–0.13 ton, palm kernel shell 0.05–0.06 ton, boiler ash 0.005–0.006 ton, and palm oil mill effluent (POME) 0.77–0.84 m³ [2]. These amounts of untreated solid wastes potentially cause environmental problems and might reduce the competitiveness and productivity of the palm oil industry in Indonesia [3]. When the waste is not sustainably managed, it leads to land, air, and water pollution [4, 5]. For example, EFB takes a long time to degrade, and POME harms the environment by polluting groundwater and reducing soil fertility. However, if treated and managed properly, they could be a valuable resource and value-added product [6].

EFB contains several nutrients and organic matter that provide fertility to the soil and can help meet nutritional needs. A research study shows that [7] the nutritional content of N, P, K, and Mg in EFB with shredded pretreatment were 0.90%, 0.60%, 2.40%, and 0.60%, respectively. Meanwhile, when press-shredded pretreatment was carried out [7], the nutritional content was 0.80%, 0.08%, 2.01%, and 0.12%, which were generally lower for the potential contents of N, P, K, and Mg. Recycling organic materials such as EFB and factory and mill waste in solid form can reduce the use of chemical fertilizers. Consequently, the application of 40–60 tons of EFB ha⁻¹year⁻¹ is highly recommended to increase organic matter and fertility in less fertile soils [8].

As for POME, it also contains relatively high nutrients, especially for K of 4173 ppm and 3193 ppm, which come from POME leachate and post biogas, respectively [9], with POME pH values of 8 and 7.5, respectively, in contrast to fresh POME with a relatively acidic pH (4.33), with a relatively low K nutrient content of 446 ppm [10]. Composting is a waste management method that can treat solid (EFB) and liquid (POME) waste. For example, composting can convert EFB into valuable products for plant growth [11]. Composting is a complex biological transformation of organic matter carried out under controlled environmental conditions by a succession of microbial communities [12, 13]. There are two processes in composting, namely, aerobic and anaerobic. Composting with an aerobic system is easier to implement, and when applied correctly, it potentially reduces the volume of solid waste. This method requires sufficient oxygen supply into the solid waste pile. In contrast, the anaerobic system method tends to be more challenging to implement, but methane production is easier to control and utilize [14].

Furthermore, composting is divided into three main stages based on temperature parameters, namely, mesophilic, thermophilic, and ripening [15, 16]. During the mesophilic phase, temperature and water content increase as a signal of a rise in psychrophilic and mesophilic microorganisms that improve the biodegradation of organic compounds and takes 20 to 30 days with temperatures above 45°C to reach the maximum peak [15, 16]. Meanwhile, the thermophilic phase occurs between 30 and 100 days [15, 16] with an increase in microorganisms and as a sanitation phase in the composting process with a temperature that must be maintained from 55 to 65°C. The final phase, namely, ripening/stabilization, is the process of decreasing temperature to 30°C, which occurs after 12 weeks. This decrease is caused by the depletion of organic compounds in the compost, thereby making the C/N ratio potentially stable. The final product or compost can be used for agricultural activities.

Data of previous studies assist in determining the best steps in palm oil waste management based on the development of methods, systems, and their application. This study aims to analyze developments in the process of palm oil waste management and its application technology in the field.

2. Materials and Methods

Data were initially obtained from the journal published globally from 2000 to 2021 and analyzed according to predetermined topics and from collections using integrated sources such as Scopus, Google Scholar, and PubMed. The keywords used were focused on composting palm oil waste with the queries of composting palm oil, waste treatment, compost empty fruit bunch, waste management, composting process, organic fertilizer, biofertilizer, palm oil mill effluent (POME), solid waste, anaerobic digestion, biodegradation, co-composting, fertilizer application, effluent treatment, and empty fruit bunches (EFB).

We used the PRISMA (Preferred Reporting Items for Systematic Reviews and Meta-Analyses) method to study with a systematic review [17], which is described in Figure 1. Subsequently, relevant abstracts were selected according to the predetermined requirements. We collected 869 articles, with an extensive selection of 135 articles and an intensive selection of 21 articles.

Articles were selected intensively with the following criteria: (i) the article must focus on the topic of compost from waste produced by palm oil, including EFB, POME, and other solid wastes; (ii) the article must contain experiments with a good statistical design and analysis; (iii) the results must contain variables such as composting time, humidity, temperature, pH, C-organic, N-total, C/N ratio, and metal components. The materials and methods section should be detailed enough that all procedures can be repeated. If several methods are described, it may be divided into heading subsections.

The article database was analyzed using the statistical software, namely, JAMOVI 1.6.23 [18] because it can use one of the raw data tabulated or the effect-sized value to obtain the standardised mean difference (SMD), heterogeneity, and publication bias information using the Egger test [19].

3. Results and Discussion

3.1. Definition of Compost

Compost is produced from the biological decomposition of fresh organic matter with the assistance of decomposing organisms. Plant or animal waste and microorganism residues in the form of bacteria, fungi, and algae are potential sources of organic matter for the soil because of their essential role in improving the physical, chemical, and biological properties [20]. Table 1 presents the various definitions of composting based on several opinions from books and articles.

3.2. Development of Palm Oil Waste Management

The traditional method of processing EFB is burning and utilizing the ashes by spreading them in the field as organic fertilizer. However, due to air pollution caused by the emission of CO_2, open burning is discouraged and prohibited in countries such as Malaysia and Indonesia. EFB is a lousy fuel because it contains a high moisture content of approximately 60%. Hence, it is usually air-dried to reduce 40% of the content for more efficient combustion. Moreover, using EFB for power generation requires costly preprocessing [30].

A more practical approach is to use EFB for organic mulching in palm oil plantations because of the large quantity produced. Processing one ton of FFB can produce 230–250 kg of EFB, 130–150 kg of fiber, and 60–65 kg of shell waste [2].

EFB can be composted to reduce volume and facilitate the application in plantations, thereby reducing costs. The compost can reduce volume in high amounts by up to 85% of the initial value [31]. In addition, composted EFB can increase soil C: N ratio and release beneficial micronutrients when applied to plantations as fertilizer [32]. Composting can be improved with a mixture of liquid waste of palm oil [33], decanter cake [34], and animal manure, including chicken, cow, and goat dung [35]. In general, it is a biological process that takes 2–3 months to complete, and a proper control of microbial activity is necessary to produce high-quality compost. Composting is also considered as a sustainable technology because it aims to preserve the environment and provide economic value by reducing chemical fertilizers that can cause land degradation [36].

Solid biomass waste generated by the factory contains lignocellulosic components, including large amounts of cellulose, hemicellulose, and lignin [37]. Various technologies have converted solid waste biomass in palm oil mills into value-added products. This waste can be converted into bio-oil and biochar through pyrolysis, which is the thermal decomposition of lignocellulosic biomass, such as palm oil, into gaseous and liquid fuels in the absence of oxygen [38]. This process usually occurs at a temperature of 400–600°C, and palm oil biomass pyrolysis products can be condensed into organic liquids such as bio-oil, noncondensable gas including CO, CO₂, and hydrogen, and CH_4, as well as biochar. These products highly depend on the process conditions and the biomass content of cellulose, hemicellulose, and lignin. Generally, there are two types of pyrolysis: fast and slow. According to Kong et al., fast pyrolysis produces bio-oil (70%), biochar (15%), and noncondensable gas (13%). Palm oil mill produces the highest amount of bio-oil usage among solid biomass waste compared to EFB and PPF (palm pressed fiber) due to the significantly higher amount of lignin [36, 38]. Meanwhile, the highest amount of biochar can be produced when the biomass is decomposed by slow pyrolysis.

The palm oil mill waste emits a pungent odor due to the decay of the organic matter, and one of the alternative physical treatments is flotation. It aims to remove/reduce the particles in the waste water by floating the oil or fat, thereby reducing the content in the palm oil mill waste. According to Ref. [39], the flotation process of POME is very effective as a physical treatment to reduce fat or oil content, COD (chemical oxygen demand), MLSS (mixed liquor suspended solid), and MLVSS (mixed liquor volatile suspended solid) contained in palm oil mill effluent. It implies that the longer the time of the liquid in the flotation equipment, the higher the reduction [39].

Several examples of solid waste biomass, such as EFB, are processed into fibers for making paper. The paper quality obtained from EFB pulp is comparable to that of kraft hardwood [40], while the bubble slurry produced is suitable for making corrugated paper and cardboard [41]. Furthermore, EFB and palm fiber are used as fillers to reinforce polymer composites using melt blends and hot-press molding techniques. EFB can also be processed into fiber materials and used in the manufacture of fiberboard as well as medium-density fiber (MDF). Other products are coir and board fiber, cement, board, roof tile, and wood paper [42]. Recently, the isolation of cellulose nanofibers, as well as microcrystalline and nanocrystalline cellulose from EFB by acid hydrolysis, has also been demonstrated [43]. Cellulose has various applications in different industries, such as food stabilizers, pharmaceuticals, compounds, cosmetics, and as a bio-filler in composites [44]. Palm fiber contains 5% to 6% dry residual oil after CPO extraction, while the remaining oil comprises natural carotenes ranging from 4000–6000 ppm, vitamin E 2400–3500 ppm, sterols 4500–8500 ppm, and coenzyme Q10 1000–1500 ppm [45]. Most of these bioactive compounds reportedly have superior antioxidant and anticancer properties. Hence, they can reduce the risk of heart-related diseases in humans. Besides, efforts have been made to recover residual oil from palm fiber using solvent and supercritical fluid extraction [46]. In Table 2, we can see the development of palm oil waste management summarised by some references.

3.3. Composting Process of Palm Oil Waste

The composting process can be divided into two stages, namely, active and ripening. During the early stages, mesophilic microbes will immediately utilize oxygen and easily degraded compounds, which are then replaced by the thermophilic. Subsequently, the temperature of the compost heap increases rapidly, followed by a rise in pH until it reaches 60°C. The temperature will remain high at 40°C during the ripening phase [56], while the mesophilic microbes are then replaced by the thermophilic ones active at high temperatures. During the active decomposition of organic matter, the microbes in the compost will decompose the substrate into NH₄⁺, CO, steam, and heat through the metabolic system with the assistance of oxygen, and the temperature reduces to the initial value. The next phase is the compost’s ripening, leading to further humic complexes’ formation. During the composting process, a decrease in the volume and biomass of the material occurs. This reduction can reach 30% to 50% of the initial weight, depending on the moisture content [56].

Microorganisms play an essential role in the composting process because the stability and maturity of compost depend on the microbial activity [57]. They can degrade and change constituents in the substrate, especially local types such as fungi that are useful in converting organic waste into compost [58]. Meanwhile, fungi degrade substrates containing lignin into simpler components because they have an efficient extracellular enzyme performance system, including hydrolytic and ligninolytic. Both systems produce cellulase, hemicellulase, and ligninase to degrade polysaccharides, lignin, and an open phenyl ring [59]. Several studies also stated that using rich N substances, such as palm oil mill effluent, cow or poultry dung, and rice husks, is one solution to increase the effectiveness of composting with EFB materials [35]. Other factors such as pH, humidity, and residual oil content can affect the natural composting process because they potentially interfere with the growth of fungi that act as composters.

In principle, composting is a method used to reduce the C/N ratio of the organic matter until it is equal to the level of the soil, namely, <20 or a = 10. It is because organic matter has a relatively high C/N ratio ranging from 58 to 60 [60]. It indicates that the higher the ratio, the longer the composting process or organic matter overhaul. The decomposition process in composting occurs under both aerobic and anaerobic conditions, as demonstrated in equation (1) in the following reaction [61]:

3.4. Composting Method Development

The appropriate method for a given composting application is determined by a variety of factors, including location, scale of operation, the consequences of occasional odors, access to capital, the nature of the feedstocks, environmental regulations, labor availability, and business objectives.

Many composting facilities use simple methods such as passively aerated static piles and turned windrows. These methods are popular because they require minimal site modification, engineering, and capital investment. Another simple, widely used method with numerous applications is aerated static pile composting (ASP). Some composting operations have implemented advanced technology and automation methods to produce compost faster, save space, provide shelter from the elements, or reduce odors where sensitive neighbors are nearby. Several criteria can be used to label and categorize composting methods, including the mode of aeration (passive vs forced), the level of containment (open, covered, contained, or in-vessel), the degree of agitation (static vs turned), and material movement (batch vs continuous).

Table 3 summarises the comparison between the windrow-based and CECC (control environment composting chamber) systems on composting. In in-vessel anaerobic composting with CECC, EFB waste from palm oil mills will be chopped to the specified size in precomposting and mixed with liquid waste and ash from combustion. The resulting biomass mixture is then transferred by the front-end loader to the CECC and stacked into customized piles 2 meters high, 6 meters wide, and 25 meters long along the tunnel. Once filled, the tunnel will be closed and blown through a computer system to ensure the optimal conditions for the composting process according to the specified batch processing temperature. The composting process is activated using a specially formulated mixture of microorganisms mixed with a liquid waste of palm oil and sprayed onto the compost pile. The computer control system will allow the composting to be completed within two weeks with reasonable control of the oxygen level in the biomass as well as the temperature and humidity levels. At high temperatures in the composting process, a certain amount of liquid waste of oil palm is sprayed onto the compost and evaporated to maintain the optimum temperature of a humid level. After two weeks, the compost will be removed from the front-end loader from the vessel and ripened in a pile for further 14 days for preservation and cooling down.

The effectiveness of the compost in the presence of a high consistency of microbial CFU (colony forming unit) is very beneficial because it allows us to see performance signs on soil conditions, plant health, and increase in yield compared to unfortified compost produced from windrow composting mechanisms. In an environment that is not controlled by the typical windrow composting process, the composting period varies from 45 to 60 days.

3.5. Compost Quality Standard

The success of essential compost can be seen in the temperature parameters indicated by the mesophilic (20–40°C), thermophilic (40–60°C), and maturity (30–35°C) phases of compost with an aerobic system [16]. The results of the review showed a change in temperature from the initial phase of about 28°C to the peak phase of about 60°C and the maturity phase to 30°C of soil temperature. The thermophilic phase will be active at high temperatures to degrade hemicellulose, cellulose, lignocellulose, lignin, and lipids [63]. EFB is a high-fiber material consisting of 44.2% cellulose, 33.5% hemicellulose, and 20.4% lignin [64]. Composting is a process of decreasing organic C/N on the substrate. The high C/N ratio in compost can be caused by high holocellulose, alpha-cellulose, and lignin in organic materials used as raw materials for compost [65]. The C/N ratio is an important factor that can affect the process conditions regarding nutrients in microbes during composting and compost as a final product. The EFB composted with several other waste materials contains relatively high nitrogen and carbon, such as poultry manure, goat manure, cow manure, and palm oil mill effluent [66].

The data from the review showed that the temperature changes during the composting process are divided into the mesophilic, peak/thermophilic, and cooling/maturation phases. The mesophilic is the initial phase of composting, and it involves a temperature range of 28°C. In comparison, the activity of local microorganisms increases in the thermophilic phase at 60°C, which is the peak phase in the degradation of organic matter. Furthermore, the last phase is the compost maturity of the final product, which occurs at the range of 25°C soil temperature. Another critical factor in determining compost quality is the degree of acidity. Bacteria and fungi in the compost which are beneficial to soil and plants will breed at pH > 5.5. If the soil pH is very low, growth and development will be hampered [67]. The pH in the composting process will increase from the initial acidic state to alkaline state, but Table 4 showed that the overall pH is in the range of 7.41. This value is classified as neutral pH and complies with the requirements of SNI 19-7030-2004 and Minister of Agriculture No. 261/KPTS/SR.310/M/4/2019 (Indonesian standard). The C/N ratio obtained follows the requirements, namely, 23.42. Overall, based on the average from a total of 21 articles, the compost produced from various organic materials as well as the techniques carried out in each study is still under the requirements determined by both SNI and the Regulation of the Minister of Agriculture regarding compost, as presented in Table 4.

A total of 135 articles in the data collection were generated for systematic review. However, after considering the inclusion and exclusion criteria, only 14 were used for the systematic review activities to determine compost quality. The eight articles contain complete information on the parameters that can be used, including moisture content, pH, C-Organic, and N-total, as well as macro- and microcomponents consisting of phosphorus (P), potassium (K), calcium (Ca), sulfur (S), iron (Fe), magnesium (Mg), zinc (Zn), manganese (Mn), and copper (Cu), as presented in Table 5.

According to the articles reviewed, the composting period ranged from 30 to 150 days. However, using organic materials such as EFB mixed with the liquid waste of palm oil, containing local microorganisms, can help accelerate the decomposition of organic matter, thereby reducing the time. The period required to reach the maturity phase of the compost takes approximately 60 days, in line with the studies presented in Table 6.

A total of 14 parameters were analyzed, 6 of which had a significant result on pH, C-organic, C/N ratio, and elements such as P, K, Fe, Zn, Mn, and Cu. Moreover, some parameters in the heterogeneity test had a value >48%, except K, Ca, S, and Mg.

The bias in the basic parameters Ca, S, and Mg was caused by excessive intervention in small-sized studies with low methodological quality. The insignificant nature of these parameters does not mean that the results were not good. However, it showed that the expected decrease and increase in specific parameters could provide quality following the requirements and standards set.

Microorganisms need C-organic as a source of energy in the composting process. Hence, the longer the composting time, the lower the C-organic levels. It is because the presence of C carbon is required for microbes to breed [60]. C-organic content based on compost quality standard SNI 19-7030-2004 (Indonesia) ranges from 9.8% to 32%. In addition, microorganisms in the composting process also require a certain amount of N. The higher the total content, the faster the organic matter will decompose.

Phosphorus and potassium are the main nutritional elements/macronutrients in microbial compost. Based on the literature review, the phosphorus and potassium levels in the compost are 0.99% and 4.14%, respectively. Given that both are macrocomponents, the higher the percentage of P and K, the better the quality of the end product. Besides, nitrogen also influences phosphorus levels, indicating that the greater the N content, the higher the P due to the multiplication of remodeling microorganisms [85]. Microorganisms use potassium as a catalyst in the substrate material. The presence of bacteria and their activities will significantly cause an increase in the content [85]. Phosphorus plays a role in the forming of flowers and fruits. At the same time, potassium helps to develop and strengthen the tissue on the fruit stalk, thereby reducing the tendency to fall.

Calcium is another essential element for growth and makes plants less susceptible to disease and pests. However, pH strongly influences its availability, implying that soil with low pH tends to have poor phosphorus and calcium contents [67]. The calcium deficit is linked to a low soil pH, organic matter, and sandy soil texture. Moreover, applying palm oil liquid waste to land can increase the magnesium value [67]. Generally, roots absorb nutrients at a neutral pH quickly because they are readily soluble in water. In acid soils, toxic elements are found due to the increase in the solubility of microelements such as Fe, Mn, Zn, Cu, and Co in large quantities, which are toxic to plants. Soil pH also determines the development and population of soil microbes. Hence, bacteria and fungi beneficial to soil and plants will breed at pH > 5.5, but when the value is low, it leads to reduced growth and hampered development [67].

Mn, Zn, and Cu micronutrients are needed in the plant growth process at moderate amounts, but based on the review results, these microelements are still below the required limits, namely, 115.44 ppm, 443.18 ppm, and 52.50 ppm, respectively. Hence, they were classified as safe. Cu is an essential nutrient for plant growth needed in low concentrations because excessive amounts cause phytotoxicity. One of the organic materials that can reduce soil phytotoxicity is organic metals’ complexity [86].

Due to its high affinity towards organic matter, Cu is not quickly mobilized in the composting process [26]. During the composting of solid-liquid waste, the formation of humic substances converts Cu from the humic substances to the organic fraction [87]. The cellular fraction decreases with increasing humic content and reducing pH from 7.5 to 6.7 in line with the affinity of Cu for organic matter [88]. The amount of adsorbed Cu decreased with an increase in the amount of C-organic dissolved in the substrate because the metal formed a stable complex that tended to remain in the substrate (Singh & Kalamdhad). Zn is also an element that is needed in small amounts, and its mobile fraction increases during the composting process due to the oxidation of organic matter and high oxidation-reduction potential. The formation of humate potentially converts Zn from the fraction of the humic substance to organic during the composting process [26].

Furthermore, Mn is a nutrient needed by plants in small amounts. The nutrient plays a critical role in synthesizing chlorophyll, a coenzyme, and acts as an activator of several respiratory enzymes in metabolic and photosynthetic reactions. A research study [26] reported that the availability of Mn decreased during the composting with animal manure.

Other metal elements such as Ni, Pb, Cd, and Cr in the compost are deficient and not expected to be present. The indicated heavy metal concentration was below the toxicity level, and Ni was not identified in the compost. After 40 days, Ni < 20 ppm, and when palm oil liquid waste was added, the concentration of heavy metals decreased in the final product [7]. The slight decrease might be related to the stabilization phase, where the moisture increased in the final stage.

3.6. Methods of Palm Oil Waste Application

Several methods are related to applying palm oil waste in the regulations and provisions set by the government in its utilization. The land application method tends to consider field-specific conditions consisting of eight main factors which are as follows: (i) the type and quantity of available waste, (ii) the shape of the ground surface, (iii) the soil type and groundwater depth, (iv) the area and distance from the WWTP (waste water treatment plant), (v) the distance between the area and the water source, (vi) the investment, operational, and maintenance costs, and (vii) the distance to residential areas. Meanwhile, the most common methods used in palm oil plantations are flat or long beds, furrows, sprinklers, and the tanker system. The differences between the methods are presented in Table 7.

Aside from developing composting technology, the following is an application review of composted EFB, POME, and other solid wastes as organic fertilizers for plant growth and productivity. According to several reviews, mulching is the most commonly used technique (Tables 8–10).

The solid waste application method generally uses a direct mulching system, either conventional or mechanical. Mulching is the practice of applying a layer of material to the soil surface to reduce temperature and increase pH and nutrients to improve plant growth and yield [95]. Using EFB mulching can effectively enhance soil aggregation and water retention. Furthermore, it facilitates weed control, prevents erosion, and helps maintain soil moisture, specifically for young palm oil [96]. Mulching can improve soil fertility because it contains the elements needed to improve the quality [53].

Liquid waste (POME) is generally applied directly as mulching in land application systems with various doses either through pond systems or biopori. This application can increase soil CEC up to 9.47 cmol·kg⁻¹ [67], improving the chemical properties of ultisol soils [97]. The summary is presented in Table 9.

The compost from co-composting EFB and POME is generally used as organic compost with a mulching application method (Table 10). Several research results show that the mulching method still does not provide consistent results on plant productivity.

4. Conclusions

Optimal palm oil waste management is usually carried out using composting and considered as a sustainable technology because it is aimed at environmental conservation and providing economic value. The in-vessel method with CECC is the best system with the shortest period of 14 days. However, it requires extra management control and produces a final product with a high microorganism value compared to the outdoor and indoor windrow methods. Furthermore, the systematic review results on the compost quality of the 14 measured parameters, namely, humidity, pH, C-organic, N-total, and macro- and micronutrients such as P, K, S, Ca, Mg, Fe, Mn, Cu, Zn, and B which were still following the standards and requirements of compost quality in Indonesia. The palm oil waste application has advantages and disadvantages. The advantages include sorting from the top based on the most applied solid and liquid waste method, using a method with the furrow system, long bed, sprinkler, and tanker. The use of solid waste for direct fertilization (EFB) and compost through a manual or mechanical mulching system is placed on the soil surface between the palms. In another method, EFB is applied after composting through mulching to supply nutrients in stock nutrition for both soil and plants to improve the quality. However, a sustainable practice needs to be studied further for a better consistent result on the yield. Based on the systematic review, we found that there are still research biases and the need for finding new methods so that the quality of the compost produced from composting EFB and POME or other waste becomes organic fertilizer that can increase soil fertility, nutrient stock, and plant productivity sustainably [104].

Data Availability

The experimental data used to support the findings of this study are available from the corresponding author upon request. The data are also available at https://fairsharing.org/users/6709.

Conflicts of Interest

The authors declare that there are no conflicts of interest regarding the publication of this paper.

Authors’ Contributions

All the authors contributed to the study’s conception and design. J.S. and M.R.S. coordinated the writing process and wrote the general parts of the manuscript (Abstract, Introduction, Materials and Methods, and Conclusion). Supervision, writing-review, and editing were performed by M.R.S. Supervision, literature review, and editing were performed by R.S. and C.H. Literature review and revision were performed by X.B.

Acknowledgments

The authors would like to thank ANJ Research Center Library and Agricultural Science Department, Padjadjaran University, for the facility and technical support during the research work. PT Austindo Nusantara Jaya Tbk, ANJ Research Center, supported this study in collaboration with the Faculty of Agriculture, Padjadjaran University, Indonesia, and Perennial Crops Department, AbSys Research Unit, Centre de Coopération Internationale en Recherche Agronomique pour le Développement, France.

References

United States Department of Agriculture (USDA), “Growth in industrial uses of palm oil exceeds food uses. Oil seeds: World markets and trade,” Circular Series FOP 9-05, Foreign Agricultural Series, United States Department of Agriculture, Washington, DC, USA, 2021.
View at: Google Scholar
N. Harihastuti, “Potensi airlimbah industri kelapa sawit (CPO) sebagai sumber bioenergi terbarukan,” Seminar Nasional Pangan Lokal, Bisnis, dan Eko-Industri, Semarang, Indonesia, pp. 43–48, 2015.
View at: Google Scholar
M. G. Richo, “Pengaruh produktivitas lahan dan nilai tambah terhadap daya saing komoditas minyak kelapa sawit Indonesia,” Jurnal Ekonomi Pembangunan, vol. 10, pp. 82–103, 2012.
View at: Google Scholar
D. Park, Y. S. Yun, and J. M. Park, “The past, present, and future trends of biosorption,” Biotechnology and Bioprocess Engineering, vol. 15, no. 1, pp. 86–102, 2010.
View at: Publisher Site | Google Scholar
K. Vijayaraghavan and Y. S. Yun, “Bacterial biosorbents and biosorption,” Biotechnology Advances, vol. 26, no. 3, pp. 266–291, 2008.
View at: Publisher Site | Google Scholar
M. Vakili, M. Rafatullah, and M. H. Ibrahim, A Review on Composting of Oil Palm Biomass, 2015.
View at: Publisher Site
A. S. Baharuddin, M. Wakisaka, and Y. Shirai, “Co-composting of empty fruit bunches and partially treated palm oil,” International Journal of Agriculture Research, 2009.
View at: Google Scholar
R. Khatun, M. I. H. Reza, M. Moniruzzaman, and Z. Yaakob, “Sustainable oil palm industry: the possibilities,” Renewable and Sustainable Energy Reviews, vol. 76, pp. 608–619, 2017.
View at: Publisher Site | Google Scholar
V. Baron, J. Supriatna, and C. Marechal, Waste Reduction and Nutrient Recovery during the Co-Composting of Empty Fruit Bunches and Palm Oil Mill Effluent, 2019.
View at: Publisher Site
A. S. Baharuddin, A. S. Baharuddin, and L. S. Hock, Effects of Palm Oil Mill Effluent (POME) Anaerobic Sludge from 500 m³ of Closed Anaerobic Methane Digested Tank on Pressed-Shredded Empty Fruit Bunch (EFB) Composting Process, 2010.
View at: Publisher Site
D. N. Aini, D. S. Mulfa, and T. M. Linda, “Pengaruh bioaktivator selulolitik untuk mempercepat pengomposan tandan kosong kelapa sawit (elaeis guineensis jacq) influence of cellulolytic bioactivator to accelerate composting of oil palm empty bunches (elaeis guineensis jacq),” Pendahuluan Metode, vol. 6, pp. 1–7, 2021.
View at: Google Scholar
H. Soepena, R. Y. Purba, and S. Pawirosukarto, A Control Strategy for Basal Stem Rot (Ganoderma) on Oil Palm, 2009.
View at: Publisher Site
F. Schuchardt, S. Balcke, and F. Becker, Production of Compost from EFB of Palm Oil Mill Solid Wastes, 2000.
G. Tchobanoglous, H. Theisen, and V. Samuel, Integrated Solid Waste Management: Engineering Principles and Management Issues, 1993.
L. B. Ayed, A. Hassen, N. Jedidi, N. Saidi, O. Bouzaiane, and F. Murano, “Microbial C and N dynamics during composting process of urban solid waste,” Waste Management & Research, vol. 25, no. 1, pp. 24–29, 2007.
View at: Publisher Site | Google Scholar
A. Hassen, K. Belguith, N. Jedidi, A. Cherif, M. Cherif, and A. Boudabous, “Microbial characterization during composting of municipal solid waste,” Bioresource Technology, vol. 80, no. 3, pp. 217–225, 2001.
View at: Publisher Site | Google Scholar
M. J. Page, J. E. McKenzie, and P. M. Bossuyt, “The PRISMA 2020 statement: an updated guideline for reporting systematic reviews,” BMJ, vol. 372.
View at: Publisher Site | Google Scholar
P. Jamovi, 2021, https://www.jamovi.org.
M. Egger, G. D. Smith, M. Schneider, and C. Minder, “Bias in meta-analysis detected by a simple, graphical test,” BMJ, vol. 315, no. 7109, pp. 629–634, 1997.
View at: Publisher Site | Google Scholar
D. Anwar, Evaluasi Kinerja Komposter Menara Pada Pengomposan Tandan Kosong Kelapa Sawit (TKKS) Menggunakan Pupuk Cair Organik Aktif Dari Limbah Cair Pabrik Kelapa Sawit (LCPKS), Universitas Sumatera Utara, 2016, https://repositori.usu.ac.id/handle/123456789/21463.
A. H. Molla, A. Fakhru’l-Razi, S. Abd-Aziz, M. Hanafi, P. Roychoudhury, and M. Alam, “A potential resource for bioconversion of domestic wastewater sludge,” Bioresource Technology, vol. 85, no. 3, pp. 263–272, 2002.
View at: Publisher Site | Google Scholar
J. Ryckeboer, J. Mergaert, and K. Vaes, “A survey of bacteria and fungi occurring during composting and self-heating processes,” Annals of Microbiology, vol. 53, pp. 349–410, 2003.
View at: Google Scholar
P. O. Oviasogie, N. O. Aisueni, and G. E. Brown, Oil Palm Composted Biomass: A Review of the Preparation, Utilization, Handling and Storage, 2010.
C. Mclaughlin, The Complete Idiot’s Guide to Composting, Penguin Group, UK, 2010.
E. Epstein, Industrial Composting: Environmental Engineering and Facilities Management, CRC Press, Boca Raton, FL, USA, 2011.
J. Singh and A. S. Kalamdhad, “Assessment of bioavailability and leachability of heavy metals during rotary drum composting of green waste (water hyacinth),” Ecological Engineering, vol. 52, pp. 59–69, 2013.
View at: Publisher Site | Google Scholar
D. Cummings, The Organic Composting: Techniques for a Healthy, 2014.
A. Oppliger and P. Duquenne, “Environmental mycology in public health: fungi and mycotoxins risk assessment and management,” Environmental Mycology in Public Health: Fungi and Mycotoxins Risk Assessment and Management, Elsevier, pp. 79–105, 2015.
View at: Google Scholar
G. Baird and A. Baird, “Composting toilets: a guide to options, design, installation, and use,” New Society, 2019.
View at: Google Scholar
N. A. Samiran, M. N. M. Jaafar, J. H. Ng, S. S. Lam, and C. T. Chong, “Progress in biomass gasification technique-with focus on Malaysian palm biomass for syngas production,” Renewable and Sustainable Energy Reviews, vol. 62, pp. 1047–1062, 2016.
View at: Publisher Site | Google Scholar
S. Salètes, F. A. Siregar, J. P. Caliman, and T. Liwang, “Ligno-cellulose composting: case study on monitoring oil palm residuals,” Compost Science & Utilization, vol. 12, no. 4, pp. 372–382, 2004.
View at: Publisher Site | Google Scholar
S. Siddiquee, S. N. Shafawati, and L. Naher, “Effective composting of empty fruit bunches using potential trichoderma strains,” Biotechnology Reports, vol. 13, pp. 1–7, 2017.
View at: Publisher Site | Google Scholar
N. Mohammad, M. Z. Alam, and N. A. Kabbashi, Effective Composting of Oil Palm Industrial Waste by Filamentous Fungi: A Review, 2012.
View at: Publisher Site
A. Yahya, C. P. Sye, T. A. Ishola, and H. Suryanto, “Effect of adding palm oil mill decanter cake slurry with regular turning operation on the composting process and quality of compost from oil palm empty fruit bunches,” Bioresource Technology, vol. 101, no. 22, pp. 8736–8741, 2010.
View at: Publisher Site | Google Scholar
J. J. Thambirajah, M. D. Zulkali, and M. A. Hashim, “Microbiological and biochemical changes during the composting of oil palm empty-fruit-bunches. Effect of nitrogen supplementation on the substrate,” Bioresource Technology, vol. 52, no. 2, pp. 133–144, 1995.
View at: Publisher Site | Google Scholar
R. Saputra, A. Hamzah, and F. Puspita, Study of Salicylic Acid Concentration in Suppressing the Development of Ganoderma Spp. Causes of Stem Rot Disease in Vitro and its Effect on Oil Palm Seedling Growth, 2022.
View at: Publisher Site
Y. H. Chan, S. Yusup, A. T. Quitain, Y. Uemura, and M. Sasaki, “Bio-oil production from oil palm biomass via subcritical and supercritical hydrothermal liquefaction,” The Journal of Supercritical Fluids, vol. 95, pp. 407–412, 2014.
View at: Publisher Site | Google Scholar
E. Onoja, S. Chandren, F. I. Abdul Razak, N. A. Mahat, and R. A. Wahab, “Oil palm (Elaeis guineensis) biomass in Malaysia: the present and future prospects,” Waste and Biomass Valorization, vol. 10, no. 8, pp. 2099–2117, 2019.
View at: Publisher Site | Google Scholar
L. Maulinda, “Pengolahan awal limbah cair pabrik minyak kelapa sawit secara fisika,” Jurnal Teknologi Kimia Unimal, vol. 2, pp. 16–30, 2013.
View at: Google Scholar
P. Singh, O. Sulaiman, R. Hashim, L. C. Peng, and R. P. Singh, “Using biomass residues from oil palm industry as a raw material for pulp and paper industry: potential benefits and threat to the environment,” Environment Devwlopment Sustainability, vol. 15, no. 2, pp. 367–383, 2013.
View at: Publisher Site | Google Scholar
W. R. W. Daud and K. N. Law, Oil Palm Fibers as Papermaking Material: Potentials and Challenges, 2011.
View at: Publisher Site
S. Prasertsan and P. Prasertsan, “Biomass residues from palm oil mills in Thailand: an overview on quantity and potential usage,” Biomass and Bioenergy, vol. 11, no. 5, pp. 387–395, 1996.
View at: Publisher Site | Google Scholar
F. Fahma, S. Iwamoto, N. Hori, T. Iwata, and A. Takemura, “Isolation, preparation, and characterization of nanofibers from oil palm empty-fruit-bunch (OPEFB),” Cellulose, vol. 17, no. 5, pp. 977–985, 2010.
View at: Publisher Site | Google Scholar
M. Beroual, D. Trache, O. Mehelli et al., “Effect of the delignification process on the physicochemical properties and thermal stability of microcrystalline cellulose extracted from date palm fronds,” Waste and Biomass Valorization, vol. 12, no. 5, pp. 2779–2793, 2021.
View at: Publisher Site | Google Scholar
C. H. Neoh, C. Y. Lam, A. Yahya, I. Ware, and Z. Ibrahim, “Utilization of agro-industrial residues from palm oil industry for production of lignocellulolytic enzymes by curvularia clavata,” Waste and Biomass Valorization, vol. 6, no. 3, pp. 385–390, 2015.
View at: Publisher Site | Google Scholar
M. Y. Yuhazri, H. Sihombing, and S. H. Yahaya, Solid Fuel from Empty Fruit Bunch Fiber and Waste Papers PART 3: Ash Content from Combustion Test, 2009.
Irvan and D. Anwar, “Kajian awal pembuatan pupuk cair organik dari effluent pengolahan lanjut limbah cair pabrik kelapa sawit (lcpks) skala pilot,” Jurnal Teknik Kimia USU, vol. 3, no. 1, pp. 32–37, 2014.
View at: Publisher Site | Google Scholar
B. Trisakti, J. Lubis, and T. Husaini, “Effect of turning frequency on composting of empty fruit bunches mixed with activated liquid organic fertilizer,” IOP Conference Series: Materials Science and Engineering, 2016.
View at: Publisher Site | Google Scholar
A. Y. Zahrim and T. Asis, “Production of non shredded empty fruit bunch semi-compost,” Journal of Institution Engineers, vol. 71, pp. 11–17, 2010.
View at: Google Scholar
W. Kananam, T. Tachapattaworakul Suksaroj, and C. Suksaroj, “Biochemical changes during oil palm (Elaeis guineensis) empty fruit bunches composting with decanter sludge and chicken manure,” ScienceAsia, vol. 37, no. 1, pp. 17–23, 2011.
View at: Publisher Site | Google Scholar
Z. Nahrul Hayawin, A. A. Astimar, and M. Anis, “Vermicomposting of empty fruit bunch with addition of palm oil mill effluent solid,” Journal of Oil Palm Research, vol. 24, pp. 1542–1549, 2012.
View at: Google Scholar
M. Alibolandi, H. Mirzahoseini, and M. A. K. Abad, “High level expression of human basic fibroblast growth factor in Escherichia coli: evaluating the effect of the GC content and rare codons within the first 13 codons,” African Journal of Biotechnology, vol. 9, pp. 2456–2462, 2010.
View at: Google Scholar
H. B. Daulay, I. Utama, and T. Tutuarima, “Analisis strategi manajemen pengolahan limbah padat di pabrik pengolahan kelapa sawit PT. Perkebunan nusantara VII unit talo pino kecamatan pring baru kabupaten seluma,” Jurnal Agroindustri, vol. 7, no. 1, pp. 20–26, 2017.
View at: Publisher Site | Google Scholar
P. N. Rahardjo, “Studi banding teknologi pengolahan limbah cair pabrik kelapa sawit,” Jurnal Teknologi Lingkungan, vol. 10, no. 1, p. 9, 2016.
View at: Publisher Site | Google Scholar
Shintawati, U. Hasanudin, and A. Haryanto, “Karakteristik pengolahan limbah cair pabrik minyak kelapa sawit dalam bioreaktor cigar semi kontinu characteristic of palm oil mill waste water treatment using semicontinue anaerobic cigar bioreactor,” Tek Pertan Lampung, vol. 6, pp. 81–88, 2017.
View at: Google Scholar
M. Endy Yulianto, R. Amalia, Wahyuningsih, Sutrisno, and Y. Arya Yudanto, “Bioadsorption of modified empty fruit bunch palm oil for reducing its 3-MCPD compounds using response surface methodology,” E3S Web of Conferences, vol. 202, Article ID 12019, 2020.
View at: Publisher Site | Google Scholar
J. Hirzel, F. Cerda, P. Millas, and A. France, “Compost tea effects on production and extraction of nitrogen in ryegrass cultivated on soil amended with commercial compost,” Compost Science & Utilization, vol. 20, no. 2, pp. 97–104, 2012.
View at: Publisher Site | Google Scholar
M. J. Estrella-González, M. M. Jurado, F. Suárez-Estrella et al., “Enzymatic profiles associated with the evolution of the lignocellulosic fraction during industrial-scale composting of anthropogenic waste: comparative analysis,” Journal of Environmental Management, vol. 248, Article ID 109312, 2019.
View at: Publisher Site | Google Scholar
L. F. Gutiérrez, Ó. J. Sánchez, and C. A. Cardona, “Process integration possibilities for biodiesel production from palm oil using ethanol obtained from lignocellulosic residues of oil palm industry,” Bioresource Technology, vol. 100, no. 3, pp. 1227–1237, 2009.
View at: Publisher Site | Google Scholar
D. Setyorini, R. Saraswati, and E. A. K. Anwar, Pupuk Organik Dan Pupuk Hayati, pp. 11–40, 2006.
F. C. Michel, “Summer perspectives,” Compost Science & Utilization, vol. 21, no. 2, p. 75, 2013.
View at: Publisher Site | Google Scholar
P. E. Poh, T. Y. Wu, and W. H. Lam, Waste Management in the Palm Oil Industry Plantation and Milling Processes, 2020, https://www.scopus.com/inward/record.uri?eid=2-s2.0-85079271128&doi=10.1007%2F978-3-030-39550-6_2&partnerID=40&md5=13c766b0acaf4be68aad82d40625caa7%0Ahttp://link.springer.com/10.1007/978-3-030-39550-6_2.
P. N. Lim, T. Y. Wu, C. Clarke, and N. N. Nik Daud, “A potential bioconversion of empty fruit bunches into organic fertilizer using Eudrilus eugeniae,” International journal of Environmental Science and Technology, vol. 12, no. 8, pp. 2533–2544, 2015.
View at: Publisher Site | Google Scholar
A. Abdul Aziz, M. Husin, and A. Mokhtar, Preparation of Cellulose from Oil Palm Empty Fruit Bunches via Ethanol Digestion: Effect of Acid and Alkali Catalysts, 2002, https://palmoilis.mpob.gov.my/publications/joprv14n1-9.pdf.
S. Sakiah, A. Firmansyah, and D. Arfianti, “Sifat Biologi Tanah Pada Lahan Aplikasi dan Tanpa Aplikasi Tandan Kosong Kelapa Sawit di Adolina PT,” Perkebunan Nusantara IV, 2020.
View at: Publisher Site | Google Scholar
M. H. M. Zainudin, M. A. Hassan, M. Tokura, and Y. Shirai, “Indigenous cellulolytic and hemicellulolytic bacteria enhanced rapid co-composting of lignocellulose oil palm empty fruit bunch with palm oil mill effluent anaerobic sludge,” Bioresource Technology, vol. 147, pp. 632–635, 2013.
View at: Publisher Site | Google Scholar
R. Rosmalinda and A. Susanto, “Aplikasi limbah cair pabrik kelapa sawit dalam memperbaiki sifat kimia tanah gambut,” Jurnal Teknologi Agro-Industri, vol. 5, no. 2, pp. 58–65, 2018.
View at: Publisher Site | Google Scholar
M. H. Abdillah, D. Program, and S. Budidaya, “Pengomposan .kal,” Jurnal Ilmiah Teknologi Pertanian Agrotechno, vol. 6, no. 1, pp. 17–24, 2021.
View at: Publisher Site | Google Scholar
M. Y. Hasan, M. A. Hassan, M. N. Mokhtar, Y. Shirai, and A. Idris, “Effect of initial carbon to nitrogen ratio on the degradation of oil palm empty fruit bunch with periodic addition of anaerobic palm oil mill effluent sludge,” Pertanika Journal of Science and Technology, vol. 29, no. 4, pp. 2435–2449, 2021.
View at: Publisher Site | Google Scholar
Sakiah, D. A. Saragih, A. Sukariawan, Guntoro, and A. S. Bakti, “The quality of compost made from mixture of Mucuna bracteata and oil palm empty fruit bunch,” IOP Conference Series: Earth and Environmental Science, vol. 762, no. 1, Article ID 012082, 2021.
View at: Publisher Site | Google Scholar
L. J. Hau, R. Shamsuddin, A. K. A. May et al., “Mixed composting of palm oil empty fruit bunch (EFB) and palm oil mill effluent (POME) with various organics: an analysis on final macronutrient content and physical properties,” Waste and Biomass Valorization, vol. 11, no. 10, pp. 5539–5548, 2020.
View at: Publisher Site | Google Scholar
L. Y. Lim, L. S. Chua, and C. T. Lee, “Physicochemical profile of microbial-assisted composting on empty fruit bunches of oil palm trees,” Environmental Science Pollution Research, vol. 22, no. 24, pp. 19814–19822, 2015.
View at: Publisher Site | Google Scholar
M. Y. Nurliyana, P. S. H’ng, H. Rasmina et al., “Effect of C/N ratio in methane productivity and biodegradability during facultative co-digestion of palm oil mill effluent and empty fruit bunch,” Industrial Crops and Products, vol. 76, pp. 409–415, 2015.
View at: Publisher Site | Google Scholar
B. Kavitha and P. Jothimani, Compost Maturity Test for Empty Fruit Bunch of Palm Oil Industry Solid Waste, 2013.
E. Erwan, M. Ismail, and H. Saud, “Physical, chemical and biological changes during the composting of oil palm frond,” African Journal of Microbiology Research, vol. 6, no. 19, pp. 4084–4089, 2012.
View at: Publisher Site | Google Scholar
M. Vakili, A. A. M. Haque, and Z. Gholami, “Effect of manual turning frequency on physico-chemical parameters during the oil palm frond and cow dung composting,” Caspian Journal of Applied, 2012, https://www.researchgate.net/profile/Abu-Ahmed-Mokammel-Haque-2/publication/232322797_Effect_of_Manual_Turning_Frequency_on_Physico-Chemical_Parameters_During_the_Oil_Palm_Frond_and_Cow_Dung_Composting/links/09e41508381e8edd6a000000/Effect-of-Manual-Turni.
View at: Google Scholar
M. N. Ahmad, M. N. Mokhtar, and A. S. Baharuddin, “Changes in physicochemical and microbial community during co-composting of oil palm frond with palm oil mill effluent anaerobic sludge,” 2011, https://ojs.cnr.ncsu.edu/index.php/BioRes/article/view/BioRes_06_4_4762_Ahmad_MBHAARH_Microbial_Community_Compost_Palm_Frond.
View at: Google Scholar
T. Nutongkaew, W. Duangsuwan, and S. Prasertsan, Production of Compost from Palm Oil Mill Biogas Sludge Mixed with Palm Oil Mill Wastes and Biogas Effluent, 2011.
H. Stichnothe and F. Schuchardt, “Comparison of different treatment options for palm oil production waste on a life cycle basis,” International Journal Life Cycle Assess, vol. 15, no. 9, pp. 907–915, 2010.
View at: Publisher Site | Google Scholar
A. S. Baharuddin, N. Kazunori, S. Abd-Aziz et al., “Characteristics and microbial succession in co-composting of oil palm empty fruit bunch and partially treated palm oil mill effluent,” The Open Biotechnology Journal, vol. 3, no. 1, pp. 87–95, 2009.
View at: Publisher Site | Google Scholar
A. S. Baharuddin, N. A. A. Razak, and N. A. Rahman, Biocoversion of Oil Palm Empty Fruit Bunch by Aspergillus Niger EB4 under Solid-State Fermentation, 2009.
D. R. Kala, A. B. Rosenani, and C. I. Fauziah, “Composting oil palm wastes and sewage sludge for use in potting media of ornamental plants,” Malaysian Journal of Soil Science, vol. 13, pp. 77–91, 2009.
View at: Google Scholar
A. Zahrim Yas, “Co-composting of palm oil mill sludge-sawdust,” Pakistan Journal of Biological Sciences, vol. 10, no. 24, pp. 4473–4478, 2007.
View at: Publisher Site | Google Scholar
F. Schuchardt, D. Darnoko, and P. Guritno, “Composting of empty oil palm fruit bunch (Efb) with simultaneous evapoaration of oil mill waste water (Pome),” International Oil Palm Conference, vol. 1–9, 2002.
View at: Google Scholar
S. Hidayati, W. Satyajaya, and A. Fudholi, “Lignin isolation from black liquor from oil palm empty fruit bunch using acid,” Journal of Materials Research and Technology, vol. 9, no. 5, pp. 11382–11391, 2020.
View at: Publisher Site | Google Scholar
M. Gupta, N. Savla, C. Pandit et al., “Use of biomass-derived biochar in wastewater treatment and power production: a promising solution for a sustainable environment,” Science of the Total Environment, vol. 825, Article ID 153892, 2022.
View at: Publisher Site | Google Scholar
H. Yu, W. Ding, J. Luo, R. Geng, A. Ghani, and Z. Cai, “Effects of long-term compost and fertilizer application on stability of aggregate-associated organic carbon in an intensively cultivated sandy loam soil,” Biology and Fertility of Soils, vol. 48, no. 3, pp. 325–336, 2012.
View at: Publisher Site | Google Scholar
J. Kuriyama, Y. Miyaji, and K. Tamura, Improved Sustainable Fractionation of Palm Oil Using Polyglycerol Fatty Acid Esters, 2011.
E. Novandaharto, Pemanfaatan Limbah Industri Pabrik Minyak Kelapa Sawit Dengan Sistem Aplikasi Pada Lahan Perkebunan Kelapa Sawit, 2015.
D. Pratama, I. Inonu, and F. I. P. Sari, “Azotobacter population, soil nitrogen and groundnut growth in mercury-contaminated tailing inoculated with Azotobacter,” Journal Degrading Min L Management, vol. 7, pp. 2149–2154, 2020.
View at: Google Scholar
F. Salahudin and M. R. Hidayat, “Microbial fuel cell (Mfc) design for production of electric bio from palm oil industry waste,” Jurnal Borneo Akcaya, vol. 1, no. 2, pp. 105–110, 2014.
View at: Publisher Site | Google Scholar
J. D. Jaya, N. Nuryati, and R. Ramadhani, “Optimasi produksi pupuk kompos tandan kosong kelapa sawit (Tkks) dan aplikasinya pada tanaman,” Jurnal Teknologi Agro-Industri, vol. 1, pp. 01–08, 2015.
View at: Publisher Site | Google Scholar
K. A. Dahlan, F. Puspita, and A. Armaini, “Aplikasi beberapa dosis tricho-kompos tkks pada tanaman pakcoy (Brassica rapa L.),” JOM Faperta, vol. 2, pp. 1–10, 2015.
View at: Google Scholar
A. I. Amri, A. Armaini, and M. R. Amindo Purba, “Aplikasi kompos tandan kosong kelapa sawit dan dolomit pada medium sub soil inceptisol terhadap bibit kelapa sawit (elaeis guineensis jacq.) di pembibitan utama,” Journal of Agroteknologi, vol. 8, no. 2, p. 1, 2018.
View at: Publisher Site | Google Scholar
A. Moradi, C. Teh Boon Sung, K. J. Goh, A. Husni Mohd Hanif, and C. Fauziah Ishak, “Effect of four soil and water conservation practices on soil physical processes in a non-terraced oil palm plantation,” Soil and Tillage Research, vol. 145, pp. 62–71, 2015.
View at: Publisher Site | Google Scholar
R. Rahmadi and I. Amir Awaluddin, Pemanfaatan Limbah Padat Tandan Kosong Kelapa Sawit Dan Tanaman Pakis-Pakisan Untuk Produksi Kompos Menggunakan Aktivator Em-4. neliti.com, 2014, https://www.neliti.com/publications/189826/pemanfaatan-limbah-padat-tandan-kosong-kelapa-sawit-dan-tanaman-pakis-pakisan-un.
M. A. Ermadani, “Pengaruh aplikasi limbah cair pabrik kelapa sawit terhadap hasil kedelai dan perubahan sifat kimia tanah ultisol effect of palm oil mill effl uent on soybean yield and chemical properties of ultisol,” Journal of Agron Indones, vol. 39, pp. 160–167, 2011.
View at: Google Scholar
D. S. Tambunan, N. Nelvia, and A. I. Amri, “Aplikasi limbah cair pabrik kelapa sawit dengan metoda biopori terhadap pertumbuhan tanaman kelapa sawit (elaeis guineensis jacq.) belum menghasilkan,” Jurnal Solum, vol. 16, no. 1, p. 19, 2019.
View at: Publisher Site | Google Scholar
H. Bangun, H. B. Jumin, and S. Zahrah, “Aplikasi limbah cair cpo (crude palm oil) dan abu janjang kelapa sawit pada tanaman cabe rawit,” Din Pertan, vol. 29, pp. 215–224, 2014.
View at: Google Scholar
M. A. Wiharja, M. S. Rochmiyati, and N. Andayani, “Pengaruh aplikasi limbah cair pabrik kelapa sawit dan tandan kosong kelapa sawit terhadap produksi kelapa sawit,” Teknol Hutan, vol. 3, pp. 58–66, 2019.
View at: Google Scholar
S. Setiono, S. M. Rohmiyati, and R. M. Hartati, “Pengaruh pupuk organik tkks dan lcpks terhadap produksi tanaman kelapa sawit,” Prosiding Semianr Instiper, pp. 48–55, 2018.
View at: Google Scholar
Hardiansyah, S. M. Rohmiyati, and Y. Astuti, “Kajian pengaruh limbah cair pks dan tandan kosong terhadap pertumbuhan dan produktivitas tanaman kelapa sawit (elaeis guineensis jacq.),” Journal Agromast, vol. 1, pp. 58–66, 2016.
View at: Google Scholar
Solichin, S. M. Rohmiyati, and E. Firmansyah, “Pengaruh dosis lumpur kering kolam lcpks dan komposisi media tanam terhadap pertumbuhan bibit kelapa sawit di prenursery,” TjyybjbAcCn, vol. 3, pp. 58–66, 2018.
View at: Google Scholar
F. Abnisa, A. Arami-Niya, W. M. A. W. Daud, and J. N. Sahu, “Characterization of bio-oil and bio-char from pyrolysis of palm oil wastes,” BioEnergy Research, vol. 6, no. 2, pp. 830–840, 2013.
View at: Publisher Site | Google Scholar

Copyright

Copyright © 2022 Jajang Supriatna et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

PDF Download Citation

Download other formats

Order printed copies

Views

1281

Downloads

1029

Citations