Abstract
Austenitic stainless steel weld metals have, in general, inferior corrosion resistance compared with the base metals. This is due to the fact that the weld metal has an inhomogeneous and dendritic microstructure with microsegregation of major elements (i.e., Cr, Mo, and Ni) as well as minor elements (i.e., S and P) at the δ-γ interface boundaries. The nonuniform alloying element concentration around ferrite particles plays a major role in determining the electrochemical corrosion behavior of such weld metals. Although the presence of ferrite is considered to be detrimental as far as the localized corrosion is considered, its exact role in uniform corrosion is still not clear. The uniform corrosion behavior of an alloy is determined by the fundamental electrochemical parameters of the major alloying elements. In this study, an attempt has been made to correlate the microstructure and uniform corrosion behavior of type 316 stainless steel weld metals with varying concentrations of Cr and Mo, and different ferrite contents. From the empirical equations obtained during the analysis of the electrochemical corrosion data, an attempt has been made to understand the role of Cr, Mo, and ferrite in altering the electrochemical corrosion parameters of the weld metal. Based on the extensive microstructural characterization, a dissolution model for the weld metal in the moderately oxidizing medium has been proposed.
Similar content being viewed by others
References
F.C. Brautigam, Welding Practices That Minimize Corrosion. Pt. 2, Chem. Eng., Vol 84, 1997, pp 97–98, 100, 102
M.A. Streicher, “Theory and Application of Evaluation Tests for Detecting Susceptibility to Intergranular Attack in Stainless Steels and Related Alloys: Problems and Opportunities,” STP 656, Annual Book of ASTM Standards, ASTM, 1978, p 70
A. Garner, The Effect of Autogenous (TIG) Welding on Chloride Pitting Corrosion in Austenitic Stainless Steels, Corrosion, Vol 35, 1979, p 108–114
O. Hammar and U. Svenson, Influence of Steel Composition on Segregation and Microstructure During Solidification of Austenitic Stainless Steels, Solidification and Casting of Metals, The Metals Society, London, 1979, p 401
R.A. Farrar, Influence of Microsegregation on Phase Transformations and Properties of Type 316 Weld Metals at Elevated Temperatures, Stainless Steels ’84, The Institute of Metals, London, 1986, p 336–342
M. Lindenmo, Microstructural Factors Affecting Pitting Resistance of Weld Metal of Highly Alloyed Austenitic Stainless Steels, Stainless Steels ’84, The Institute of Metals, London, 1986, p 262–270
M.J. Cieslak and W.F. Savage, Ferrite Morphology in High Molybdenum Stainless Steels (Technical Note), Welding J., Vol. 60, 1981, p 131s-134s
T.G. Davey, T.G. Gooch, and J.L. Robinson, An Assessment of Flux-Cored Wire Welding Type 316L Austenitic Stainless Steel: Part 1, Metal Construct., Vol. 19, 1987, p 431–433, 435
F.C. Hull, Effect of Delta-Ferrite on the Hot Cracking of Stainless Steel, Welding J., Vol. 46, 1967, p 399s-409s
A. Garner, How Stainless Steel Welds Corrode, Metal Prog., Vol 127, 1985 p 31–32, 34–36
K.F. Krysiak, Cause and Prevention of Unusual Failures of Materials, Corrosion/83, National Association of Corrosion Engineers, 1983, p 16
M. Henthorne, Corrosion Testing of Weldments, Corrosion, Vol 30, 1974, p 39–46
P.I. Marshall and T.G. Gooch, Effect of Composition on Corrosion Resistance of High Alloy Austenitic Stainless Steel Weld Metals, Corrosion, Vol 49, 1993, p 514–526
U.K. Mudali, R.K. Dayal, T.P.S. Gill, and J.B. Gnanamoorthy, Influence of Nitrogen Addition on Microstructure and Pitting Corrosion Resistance of Austenitic Weld Metals, Werk. Korrosion, Vol 37, 1986, p 637–643
M.G. Pujar, U.K. Mudali, P.K. Dayal, and T.P.S. Gill, Susceptibility of As-Welded and Thermally Aged Type 316LN Weldments Toward Pitting and Intergranular Corrosion, Corrosion, Vol 48, 1992, p 579–586
Gas Tungsten Arc Welding, Welding Handbook, 8th ed., Vol 2, R.L. O’Brien, Ed., American Welding Society, 1991, Chap. 3, p 82
“Standard Procedure for Calibrating Magnetic Instruments to Measure the Delta-Ferrite Content of Austenitic Stainless Steel Weld Metal,” AWS A4.2-74, American Welding Society, 1974
“Standard Reference Test Method for Making Potentiostatic and Potentiodynamic Anodic Polarization Measurements,” ASTM-G:5-94, Annual Book of ASTM Standards, ASTM, 1995, p 48–58
T.G. Gooch, Corrosion of AISI Type 304 Austenitic Stainless Steel, Br. Welding J., Vol. 15, 1968, p 345–357
“Standard Test Method for Conducting Potentiodynamic Polarization Resistance Measurements,” ASTM-G:59–91, Annual Book of ASTM Standards, 1995, p 216–219
S. Barnartt, Two-Point and Three-Point Methods for the Investigation of Electrode Reaction Mechanism, Electrochem. Acta, Vol 15, 1970, p 1313–1324
M.J. Danielson, An Evaluation of the Three-Point Method to Measure Corrosion Rates, Corrosion, Vol 38, 1982, p 580–586
C.D. Lundin, T.P.S. Gill, C.Y.P. Qiao, Y. Wang, and K.K. Khan, Weldability of Low-Carbon Micro-alloyed Steels for Marine Structures, WRC Bull., Vol 359, 1990, p 15
N. Suutala, Effect of Solidification Conditions on the Solidification Mode in Austenitic Stainless Steel Welds, Met. Trans. A, Vol 14A, 1983, p 191–197
W.T. DeLong, Ferrite in Austenitic Stainless Steel Weld Metal, Welding J., Vol 53, 1974, p 273s-286s
D.J. Kotecki and T.A. Siewert, WRC-1992 Constitution Diagram for Stainless Steel Weld Metals: a Modification of the WRC-1988 Diagram, Welding J., Vol 71, 1992, p 171s-178s
S.A. David, Ferrite Morphology and Variations in Ferrite Content in Austenitic Stainless Steel Welds, Welding J., Vol 60, 1981, p 63s-71s
J.A. Brooks and A.W. Thompson, Microstructural Development and Solidification Cracking Susceptibility of Austenitic Stainless Steel Welds, Int. Mater. Rev., Vol 36, 1991, p 16–44
J.A. Brooks, J.C. Williams, and A.W. Thompson, Solidification and Solid State Transformations of Austenitic Stainless Steel Welds, Trends in Welding Research, S.A. David, Ed., American Society for Metals, 1982, p 331–357
J.A. Brooks, A.W. Thompson, and J.C. Williams, A Fundamental Study of the Beneficial Effects of Delta Ferrite in Reducing Weld Cracking, Welding J., Vol 63, 1983, p 71s-83s
M.A.A. Tullmin and F.P.A. Robinson, Effect of Molybdenum Additions on the Corrosion Resistance of a 12% Chromium Steel, Corrosion, Vol 44, 1988, p 664–670
E.A. Lizlovs, Effects of Mo, Cu, Si and P on Anodic Behaviour of 17Cr Steels, Corrosion, Vol 22, 1966, p 297–308
M.B. Rockel, Effect of Mo on the Corrosion Behavior of Fe-Cr Alloys, Corrosion, Vol 29, 1973, p 393–396
Corrosion In Aqueous Solution, Metal/Environment Reaction, Vol 1, 3rd ed., L.L. Shreir, R.A. Jarman, and G.T. Burstein, Ed., Butterworth-Heinemann, Oxford, 1994, p 52–113
N.D. Greene, Predicting Behavior of Corrosion Resistant Alloys by Potentiostatic Polarization Methods, Corrosion, Vol 18, 1962, p 136t
A.P. Bond and E.A. Lizlovs, Anodic Polarisation of Austenitic Stainless Steels in Chloride Media, J. Electrochem. Soc., Vol 15, 1968, p 1130–1135
Y.H. Yau and M.A. Streicher, The Effect of Chromium Content (0–35%) in Fe-Cr Alloys on Corrosion Rates and Mechanisms in 1.0N Sulfuric Acid, Corrosion, Vol 47, 1991, p 352–359
C.-O.A. Olsson, The Influence of Nitrogen and Molybdenum on Passive Films Formed on the Austeno-Ferritic Stainless Steel 2205 Studied by AES and XPS, Corrosion Sci., Vol 37, 1995, p 467–479
K. Asami, M. Naka, K. Hashimoto, and T. Masumoto, Effect of Molybdenum on the Anodic Behavior of Amorphous Fe-Cr-Mo-B Alloys in Hydrochloric Acid, J. Electrochem. Soc., Vol 127, 1980, p 2130–2138
K. Sugimoto and Y. Sawada, Role of Mo Additions to Austenitic Stainless Steels in the Inhibition of Pitting in Acid Chloride Solutions, Corrosion Sci., Vol 17, 1977, p 425–445
J.W. Johnson, M.S. Lee, and W.J. James, Electrochemical Behaviour of Molybdenum in Acid Chloride Solutions, Corrosion, Vol 26, 1970, p 507–510
P.Y. Park, E. Akiyama, A. Kawashima, K. Asami, and K. Hashimoto, The Corrosion Behavior of Sputter-Deposited Cr-Mo Alloys in 12 M HCl Solution, Corrosion Sci., Vol 37, 1995, p 1843–1860
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Pujar, M.G., Dayal, R.K., Gill, T.P.S. et al. Evaluation of microstructure and electrochemical corrosion behavior of austenitic 316 stainless steel weld metals with varying chemical compositions. J. of Materi Eng and Perform 14, 327–342 (2005). https://doi.org/10.1361/10599490523977
Received:
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1361/10599490523977