Abstract
The study solves a system of finite difference equations for flexible shallow concrete shells while taking into account the nonlinear deformations. All stiffness properties of the shell are taken as variables, i.e., stiffness surface and through-thickness stiffness. Differential equations under consideration were evaluated in the form of algebraic equations with the finite element method. For a reinforced shell, a system of 98 equations on a 8×8 grid was established, which was next solved with the approximation method from the nonlinear plasticity theory. A test case involved computing a 1×1 shallow shell taking into account the nonlinear properties of concrete. With nonlinear equations for the concrete creep taken as constitutive, equations for the quasi-static shell motion under constant load were derived. The resultant equations were written in a differential form and the problem of solving these differential equations was then reduced to the solving of the Cauchy problem. The numerical solution to this problem allows describing the stress-strain state of the shell at each point of the shell grid within a specified time interval.
References
[1] Voyiadjis G.Z., Zolochevsky A., Thermodynamic modeling of creep damage in materials with different properties in tension and compression, Int. J. Sol. Struct., 2000, 37(24), 3281-3303.10.1016/S0020-7683(99)00031-1Search in Google Scholar
[2] Zolochevsky A., Sklepus S., Hyde T.H., Becker A.A., Peravali S., Numerical modeling of creep and creep damage in thin plates of arbitrary shape from materials with different behavior in tension and compression under plane stress conditions, Int. J. Numer. Meth. Eng., 2009, 80(11), 1406-1436.10.1002/nme.2663Search in Google Scholar
[3] Shevchenko Yu.N., Galishin A.Z., Determination of the axially symmetric geometrically nonlinear thermoviscoelastoplastic state of thin layered shells with regard for the damageability of the material, J. Math. Sci., 2009, 162(2), 216-230.10.1007/s10958-009-9633-6Search in Google Scholar
[4] Pilkey W.D., Pilkey D.D., Peterson’s Stress Concentration Factors, John Wiley & Sons, New York, 2008.10.1002/9780470211106Search in Google Scholar
[5] Karpov V., Semenov A., Strength and stability of orthotropic shells, World Appl. Sci. J., 2014, 30(5), 617-623.Search in Google Scholar
[6] Oterkus E., Madenci E., Nemeth M., Stress analysis of composite cylindrical shells with an elliptical cutout, J. Mech. Mater. Struct., 2007, 2(4), 695-727.10.2140/jomms.2007.2.695Search in Google Scholar
[7] Storozhuk E.A., Chernyshenko I.S., Yatsura A.V., Stress–Strain State Near a Hole in a Shear-Compliant Composite Cylindrical Shell with Elliptical Cross-Section, Int. Appl. Mech., 2018, 54, 559-567.10.1007/s10778-018-0909-8Search in Google Scholar
[8] Timergaliev S.N., Kharasova L.S. Study of the solvability of a boundary value problem for the system of nonlinear differential equations of the theory of shallow shells of the Timoshenko type, Diff. Equat., 2016, 52(5), 630-643.10.1134/S0012266116050098Search in Google Scholar
[9] Zolochevsky A., Sklepus S., Galishin A., Kühhorn A., Kober M., A comparison between the 3D and the Kirchhoff–Love solutions for cylinders under creep-damage conditions, Technische Mech., 2014, 34(2), 104-113.Search in Google Scholar
[10] Van Dung D., Hoai B.T.T., Postbuckling nonlinear analysis of FGM truncated conical shells reinforced by orthogonal stiffeners resting on elastic foundations, Acta Mechanica, 2017, 228(4), 1457-1479.10.1007/s00707-016-1768-1Search in Google Scholar
[11] Huang S., Qiao P., Lu L., Qi Y., Nonlinear stability analysis of rotationally-restrained imperfect doubly-curved composite shallow shells, Thin-Walled Struct., 2019, 142, 358-368.10.1016/j.tws.2019.05.008Search in Google Scholar
[12] Moyeda A., Fish J., Towards practical multiscale approach for analysis of reinforced concrete structures, Computat. Mech., 2018, 62, 685-700.10.1007/s00466-017-1521-1Search in Google Scholar
[13] Pshenin V., Zaripova N., Zaynetdinov, K. Modeling of the crude oil (or petroleum products) vapor displacement during rail tanks loading, Petrol. Sci. Technol., 2019, 37(24), 2435-2440.10.1080/10916466.2019.1655442Search in Google Scholar
[14] Bakesheva A.T., Irgibaev T.I., Belousov, A.E. Determination of Natural Gas Loss Values Based on Physical Simulation of Leakages from the Pipeline to the Media with Superatmospheric Pressure Using a Volumetric-Type Expander, News of the National Academy of Sciences of the Republic of Kazakhstan, Series Geol. Techn. Sci., 2019, 3(435), 114-121.10.32014/2019.2518-170X.76Search in Google Scholar
[15] Karpov V., Semenov A., Computer Modeling of the Creep Process in Stiffened Shells, in: Murgul V., Pasetti M. (eds), Int. Sci. Conf. Energy Manag. Municip. Facilit. Sustain. Energy Technol. EMMFT 2018, EMMFT-2018, Adv. Intel. Syst. Comput., Springer, Cham, 2020, 982.Search in Google Scholar
[16] Sozio F., Yavari A., Nonlinear mechanics of surface growth for cylindrical and spherical elastic bodies, J. Mech. Phys. Sol., 2017, 98, 12-48.10.1016/j.jmps.2016.08.012Search in Google Scholar
[17] Bespalova, E., Complete systems method for linear and nonlinear problems of shallow shells theory, Thin-Walled Struct., 2019, 142, 277-28610.1016/j.tws.2019.05.015Search in Google Scholar
[18] Chepurnenko A.S. Stress-strain state of three-layered shallow shells under conditions of nonlinear creep, Magaz. Civil Eng., 2018, 76(8), 156-168.Search in Google Scholar
[19] Arefi M., Zenkour A.M., Nonlinear and linear thermo-elastic analyses of a functionally graded spherical shell using the Lagrange strain tensor, Smart Struct. Syst., 2017, 19, 33-38.10.12989/sss.2017.19.1.033Search in Google Scholar
[20] Uskov V.N., Bulat P.V. Shock and detonation wave in terms of view of the theory of interaction gasdynamic discontinuities, Life Sci. J., 2014, 11(8), 307-310.Search in Google Scholar
[21] Bakhshizadeh A., Zamani Nejad M., Davoudi Kashkoli M., Time-Dependent Hygro-Thermal Creep Analysis of Pressurized FGM Rotating Thick Cylindrical Shells Subjected to Uniform Magnetic Field, J. Sol. Mech., 2017, 9(3), 663-679.Search in Google Scholar
[22] Kashkoli M.D., Tahan K.N., Nejad M.Z. Time-dependent thermo-mechanical creep behavior of FGM thick hollow cylindrical shells under non-uniform internal pressure, Int. J. Appl. Mech., 2017, 9(6), 1750086.10.1142/S1758825117500867Search in Google Scholar
[23] Iskakbayev A., Teltayev B., Oliviero Rossi C., Yensebayeva G., Determination of nonlinear creep parameters for hereditary materials, Appl. Sci., 2018, 8(5), 760.10.3390/app8050760Search in Google Scholar
[24] Tokmuratov A.M., Sanzharovskii R.S., Duisenbekov B.K., Dependence of nonlinear hereditary creep theory for concrete and creep equation of the hardening type at a flat stress state, XIV Int. Sci.-Pract. Conf. «Bdesheto vprosi ot sveta na naukata - 2018», Izd-vo Byal GRAD-BG ODD, Bulgaria, 2018, 17-19.Search in Google Scholar
[25] Tokmuratov A.M., Duissenbekov B.K., The allowing equations of flat reinforced concrete envelopes taking into account non-linear creep strains, M. Auezov South Kazakhstan State University, Proc. V Int. Conf. «Industrial Technologies and Engineering» ICITE-2018, Shymkent, 2018, 120-127.Search in Google Scholar
[26] Barabash M.S., Romashkina M.A., Algorithm of modeling and calculation of the structure taking into account the creep of concrete, International Journal for Computat. Civil Struct. Eng., 2014, 10(2), 56-63.Search in Google Scholar
[27] Harapin A., Škomrlj N.O., Dragan Ć., A Case Study on Construction Technology for the Reinforced Concrete Dome of the Višnjik Sports Hall, Zadar, Croatia, Int. Review Civil Eng. (IRCE), 2018, 9(4), 131.10.15866/irece.v9i4.14882Search in Google Scholar
[28] Tokmuratov A.M., Calculation of flat reinforced concrete casings taking into account nonlinear and creepy material, Calculation of construction design on statistical and dynamic loads, Izd-vo LISi, Leningrad, 1985, 59-68.Search in Google Scholar
[29] Polyanin A.D., Zaitsev V.F., Handbook of ordinary differential equations: exact solutions, methods, and problems, CRC Press, 2017, 1496.10.1201/9781315117638Search in Google Scholar
[30] Butcher J.C. Runge–Kutta methods for ordinary differential equations, Numer. An. Optim., Springer, Cham, 2015, 37-58.10.1007/978-3-319-17689-5_2Search in Google Scholar
[31] Sklepus S.N. Creep and Damage of Shallow Shells, Int. Appl. Mech., 2018, 54(2), 180-18710.1007/s10778-018-0870-6Search in Google Scholar
[32] Galishin A.Z., Sklepus S.N. Estimating the Strength of Layered Cylindrical Shells Under Creep, Int. Appl. Mech., 2018, 54(1), 64-74.10.1007/s10778-018-0860-8Search in Google Scholar
[33] Galishin A.Z., Sklepus S.N. Prediction of the Time to Failure of Axisymmetrically Loaded Hollow Cylinders Under Conditions of Creep, J. Math. Sci., 2019, 240(2), 194-207.10.1007/s10958-019-04347-1Search in Google Scholar
[34] Farahani B.V., Belinha J., Andrade Pires F.M., Ferreira A.J.M., A radial point interpolation meshless method extended with an elastic rate-independent continuum damage model for concrete materials, Mech. Adv. Mater. Struct., 2018, 25(10), 855-867.10.1080/15376494.2017.1308593Search in Google Scholar
© 2020 Bolat Duissenbekov et al., published by De Gruyter
This work is licensed under the Creative Commons Attribution 4.0 International License.
