Non-linear deflection and stress analysis of laminated composite sandwich plate with elliptical cutout under different transverse loadings in hygro-thermal environment

References

[1] Paul T.K., Rao K.M., Stress analysis around circular holes in FRP laminates under transverse load, Comp. Struct., 1989, 33, 923-937.10.1016/0045-7949(89)90427-6Search in Google Scholar

[2] Paul T.K., Rao K.M., Finite element evaluation of stress concentration factor of thick laminated plates under transverse loading, Comp. Struct., 1993, 48, 311-317.10.1016/0045-7949(93)90423-BSearch in Google Scholar

[3] Jain N.K., Analysis of stress concertation and deflection in isotropic and orthotropic rectangular plates with maximum circular hole under transverse loading, Int. J. Mech. Mechatr. Eng., 2009, 3, 1513-1519.Search in Google Scholar

[4] Xiwu X., Liandxing S., Xuqi, F., Stress concentration of finite composite laminates weakened by multiple elliptical holes, Int. J. Solid Struct., 1995, 32, 3001-3014.10.1016/0020-7683(94)00301-CSearch in Google Scholar

[5] Rzayyig A.Y., Effect of cutouts on the behavior of clamped rectangular plates, Anbar J. Eng. Sci., 2011, 2, 45-59.Search in Google Scholar

[6] Ukadgaonker V.G., Rao D.K.N., A general solution for stresses around holes in symmetric laminates under inplane loading, Compos. Struct., 2000, 49, 339-354.10.1016/S0263-8223(00)00070-2Search in Google Scholar

[7] Toubal L., Karama M., Lorrain B., Stress concentration in a circular hole in composite plate, Compos. Struct., 2005, 68, 31-36.10.1016/j.compstruct.2004.02.016Search in Google Scholar

[8] Patel N.P., Sharma D.S., Bending of composite plate weakened by square hole, Int. J. Mech. Sci., 2015, 94, 131-139.10.1016/j.ijmecsci.2015.02.021Search in Google Scholar

[9] Priyadharshani S.A., Prasad A.M., Sundaravadivelu R., Analysis of GFRP stiffened composite plates with rectangular cutout, Compos. Struct., 2017, 169, 42-51.10.1016/j.compstruct.2016.10.054Search in Google Scholar

[10] Sai Ram K.S., Babu T.S., Study of bending of laminated composite shells. Part II: shells with a cutout, Compos. Struct., 2001, 51, 117-126.10.1016/S0263-8223(00)00130-6Search in Google Scholar

[11] Chaudhuri P.B., Mitra A., Sahoo S., Deflection, forces and moments of composite stiffened hyper shells with cutout, Mater. Today: Proc., 2017, 4, 9718-9722.10.1016/j.matpr.2017.06.254Search in Google Scholar

[12] Ghannadpour S.A.M., Mehrparvar M., Energy effect removal technique to model circular/elliptical holes in relatively thick composite plates under in-plane compressive load, Compos. Struct, 2018, 202, 1032-1041.10.1016/j.compstruct.2018.05.026Search in Google Scholar

[13] Zhou J. Li, Z., Chen J., Damage identification method based on continuous wavelet transform and mode shapes for composite laminates with cutouts, Compos. Struct., 2018, 191, 12-23.10.1016/j.compstruct.2018.02.028Search in Google Scholar

[14] Ferreira A.J.M., Analysis of Composite Plates Using a layerwise theory and multiquadric discretization, Mech. Adv. Mater. Struct., 2005, 12, 99-112.10.1080/15376490490493952Search in Google Scholar

[15] Ghosh A.K., Dey S.S., A simple element for the analysis of laminated plates, Compos. Struct., 1990, 44, 585-596.10.1016/0045-7949(92)90391-CSearch in Google Scholar

[16] Cho M., Parmerter R.R., An eflcient higher-order plate theory for laminated composites, Compos. Struct., 1992, 20, 113-123.10.1016/0263-8223(92)90067-MSearch in Google Scholar

[17] Putcha N.S., Ruddy J.N., A refined mixed shear flexible finite element for the non-linear analysis of laminated plates, Comp. Struct., 1986, 22, 529-538.10.1016/0045-7949(86)90002-7Search in Google Scholar

[18] Pandya B.N., Kant T., Higher-order shear deformable theories for flexure of sandwich plates-finite element evaluations, Int. J. Solids Struct., 1988, 24, 167-1286.10.1016/0020-7683(88)90090-XSearch in Google Scholar

[19] Grover N., Maiti D.K., Singh B.N., A new inverse hyperbolic shear deformation theory for static and buckling response of laminate composite and sandwich plates, Compos. Struct., 2013, 95, 667-675.10.1016/j.compstruct.2012.08.012Search in Google Scholar

[20] Grover N., Singh B.N., Maiti D.K., Analytical and finite element modeling of laminated composite and sandwich plates: An assessment of a new shear deformation theory for free vibration response, Int. J. Mech. Sci., 2013, 67, 89-99.10.1016/j.ijmecsci.2012.12.010Search in Google Scholar

[21] Lal A., Kulkarni N.M., Siddaramaiah V.H., Stochastic hygrothermo-mechanically induced non-linear static analysis of piezoelectric elastically support sandwich plate using secant function based shear deformation theory (SFSDT), Int. J. Comput. Mater. Sci. Eng., 2016, 6, 16500201-46.10.1142/S2047684116500202Search in Google Scholar

[22] Mantari J.L., Oktem A.S., Soares C.G., A new trigonometric shear deformation theory for isotropic, laminated composite and sandwich plates, Int. J. Solids Struct., 2012, 49, 43-53.10.1016/j.ijsolstr.2011.09.008Search in Google Scholar

[23] Reddy J.N., An evaluation of equivalent-single-layer and layer wise theories of composite laminates, Compos. Struct., 1993, 25, 21-35.10.1016/0263-8223(93)90147-ISearch in Google Scholar

[24] Sayyad S.A., Ghugal Y.M., Naik N.S., Bending analysis of laminated composite and sandwich beams according to refined trigonometric beam theory, Curved and Layer. Struct, 2015, 2, 279-289.10.1515/cls-2015-0015Search in Google Scholar

[25] Sheikh A.H., Chakrabarti A., A new plate bending element based on higher-order shear deformation, 2003, 39, 883–903.10.1016/S0168-874X(02)00137-3Search in Google Scholar

[26] Touratier M., An eflcient standard plate theory, Int. J. Eng. Sci., 1991, 29, 901-916.10.1016/0020-7225(91)90165-YSearch in Google Scholar

[27] Srikanth G., Kumar A, Post buckling response and failure of symmetric laminates under uniform temperature rise, Compos. Struct., 2003, 59, 109-118.10.1016/S0263-8223(02)00186-1Search in Google Scholar

[28] Maiti D.K., Sinha P.K., Bending, free vibration and impact responses of thick laminated composite plates, Comp. Struct., 1996, 5, 115-129.10.1016/0045-7949(95)00232-4Search in Google Scholar

[29] Carrera E., Theories and finite elements for multilayered, anisotropic, composite plates and shells, Archiv. Comput. Meth. Eng., 2002, 9, 87-140.10.1007/BF02736649Search in Google Scholar

[30] Carrera E., Historical review of zig-zag theories for multilayered plates and shells, Appl. Mech. Rev., 2003, 56, 65-75.10.1115/1.1557614Search in Google Scholar

[31] Carrera E., Valvano S., A variable kinematic shell formulation applied to thermal stress of laminated structures, J. Therm. Stress., 2016, 40, 803-827.10.1080/01495739.2016.1253439Search in Google Scholar

[32] Carrera E., Valvano S., Filippi M., Classical, higher-order, zigzag and variable kinematic shell elements for the analysis of composite multilayered structures, Europ. J. Mech. / A Solids, 2018, 72, 97-110.10.1016/j.euromechsol.2018.04.015Search in Google Scholar

[33] Tornabene F., Fantuzzi N., Bacciocchi M., Linear Static Behavior of Damaged Laminated Composite Plates and Shell, Materials, 2017, 10, 1-51.10.3390/ma10070811Search in Google Scholar

[34] Tornabenea F., Brischettob S., 3D capability of refined GDQ models for the bending analysis of composite and sandwich plates, spherical and doubly-curved shells, Thin-Walled Struct., 2018, 129, 94–124.10.1016/j.tws.2018.03.021Search in Google Scholar

[35] Tornabene F., Fantuzzi N., Bacciocchi M., Foam core composite sandwich plates and shells with variable stiffness: Effect of the curvilinear fiber path on the modal response, J. Sandwich Struct. Mater., 2017, 21, 320-365.10.1177/1099636217693623Search in Google Scholar

[36] Woodward B., Kashtalyan M., 3D elasticity analysis of sandwich panels with graded core under distributed and concentrated loadings, Int. J. Mech. Sci., 2011, 53, 872-885.10.1016/j.ijmecsci.2011.07.011Search in Google Scholar

[37] Upadhyay A.K., Pandey R., Shukla K.K., Non-linear flexural response of laminated composite plates under hygro-thermo-mechanical loading, Commun. Non-linear Sci Numer. Simulat., 2010, 15, 2634-2650.10.1016/j.cnsns.2009.08.026Search in Google Scholar

[38] Kumar R., Patil H.S., Lal A., Hygrothermoelastic buckling response of laminated composite plates with random system properties macro-mechanical and micromechanical model, J. Aerosp. Eng., 2012, 28, 04014123-18.10.1061/(ASCE)AS.1943-5525.0000241Search in Google Scholar

[39] Lal A., Kulkarni N., Singh B.N., Stochastic thermal post-buckling response of elastically supported laminated piezoelectric composite plate using micromechanical approach, Curved and Layer. Struct., 2015, 2, 331-350.10.1515/cls-2015-0019Search in Google Scholar

[40] Pandit M.K., Sheikh A.H., Singh B.N., An improved higher order zigzag theory for the static analysis of laminated sandwich plate with a soft core, Finite Elem. An. Design, 2008, 44, 602-610.10.1016/j.finel.2008.02.001Search in Google Scholar

[41] Hadjiloizi D. A., Kalamkarov A. L., Metti Ch., Georgiades A. V., Analysis of Smart Piezo-Magneto-Thermo-Elastic Composite and Reinforced Plates: Part I – Model Development, Curved and Layer. Struct., 2014, 1, 11–31.10.2478/cls-2014-0002Search in Google Scholar

[42] Hadjiloizi D. A., Kalamkarov A. L., Metti Ch., Georgiades A. V., Analysis of Smart Piezo-Magneto-Thermo-Elastic Composite and Reinforced Plates: Part II – Applications, Curved and Layer. Struct., 2014, 1, 32–58.10.2478/cls-2014-0003Search in Google Scholar

[43] Reddy J.N., Theory and analysis of elastic plates and shells. 2^nd ed. Boca Raton: CRC Press, 2007.10.1201/9780849384165Search in Google Scholar